No Internet Connection After Running Norton Removal Tool
Mar 10, 2012
I downloaded and ran the norton removal tool on my pc which has a wired connection to my router but when I restarted I had lost internet connection. I ran the diagnostic tool and it said 'Invalid IP address' and repeated 'Unexpected error from iphlpapi: The pipe is being closed' several times
I tried rebooting the router and the following -
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log But nothing has worked. The 3 laptops and Xbox connected to the router are still working fine.....
I had a serious infection in my PC desktop (a very harmful class of rootkit) and the only onle solution was Combofix. But after "cleaning" my Internet connection is not working anymore. All the solutions I have found about restoring Winsock funcionality were useless.I have a laptop connected via Wi-Fi and it is working fine. So any problem with my modem or router should be ruled out.Especially because the same desktop can connect to the Internet using Ubuntu Linux.
I've got a problem with Norton 360 6.0. Everytime it updates its definitions, my internet disconnects and I have to reboot my computer to get it back. However, every time I try to command prompt a ping, it says I'm connected as does my networking center.
My Vista computer and my XP computer had been happily "talking" to each other, sharing files and printers. I got tired of paying $70 a year for Norton Internet Security, so I uninstalled it (using the Norton removal tool) and selected the Windows Firewall. I also installed Avast! and SuperAntiSpyware. Now neither computer talks to the other. When I run "\FamilyRoomHPOfficeJet" I get "Windows cannot access \FamilyRoomHPOfficeJet" . Check spelling, etc. Get error code 0x800704b3 "The network path was either typed incorrectly, does not exist or the network provider is not currently available..." What have I messed up by going from the Norton firewall to the Windows one.
Few days ago the wireless in my son's Dell Inspiron 620 went bad. It does connect to my old router (WEP), but speed is terrible and connection goes bad after some time. I can also see my modern router and enter the key successfully (WPA2), but it won't connect. Connection to both routers went well for months before, and still goes well from all other devices in the house.
I read the issue with McAfee that was posted late August and followed the steps. Connection in safe mode didn't work. Then I removed McAfee from the PC, no difference. Then I restored the PC to a couple of days before the issues began, removed McAfee again (as it came back through the restore), no difference.
I reinstalled the drivers of the Dell wireless card, no difference.
My desktop got a virus about 1 month ago. Until then my internet connection was working fine. We removed the virus but our internet is still not working. I called my internet provider and we spent hours trying to figure it out and it wouldnt work. So they told me it was the computer. my daughter got a new laptop and we plugged the cable into her computer and the internet worked perfectly. I contacted emachines but they charge me for customer service.
I had virus called Anti Malaware Doctor. Its a nasty trojan virus. Managed to clear up with Malaware bites and Hijack this but now the internet is down. Some drivers seems to be mising
I have windows xp media center version 2005...I removed a couple of viruses several days ago and now I cant get onto the internet....I am however, connected to it, but my LAN connection says that it is aquiring an IP address...I had a missing netbt.sys file but replaced it and still no internet access...
I am running win xp and I am very intrested in encrypting my internet connection using exp.8 and firefox 4. what do i have to do to get the ball rolli ng?
I'm connecting to the internet via my college's network, and my network trouble varies from: working fine, full speed; extremely slow; and then sometimes it loses the internet connection completely.
-I am running Windows 7 64bit
-Connecting wireless
-I have reset the TCP/IP stack repair options
I fail every ping test except for "DNS Lookup" via Xirrus Wi-Fi.
I have a dell studio 1557 running windows 7. I live in my own apartment with roommates in college, and i've been having some very bad issues with slow internet or constant down time. Here are some key points:
- I have Charter internet.
- My 2 other roommates have NO ISSUES.
- My laptop works in my family's house. They have Comcast. I went on vacation a week ago and there were no issues on the hotel internet. No issues from the school's internet.
- I have been using my android phone as a tether because the internet is more stable. It's slow, but consistent for the most part. This is extra frustrating because I shouldnt have slow internet. And I sure as hell shouldnt be paying for internet I can't even enjoy.
- Charter has replaced 2 routers. Both are brand new. They are net gear. Charter is clueless to my problem.
- I have reinstalled windows. Dell told me to try safe mode. I noticed NO ISSUES WITH STANDARD BROWSING IN SAFE MODE. This leads me to believe it is a software issue.
- The connection is non-existent when coming out of hibernation or rebooting. In the morning, i have to boot up, make my coffee, and only then will it give me access to the internet. Otherwise, page timeouts. It can take up to 10 minutes for the internet to work.
- Youtube and general multitasking is very bad. Slower connection than ever, page timeouts, and I often need to wait for a video/music to buffer before I begin enjoying it.
My laptop has been this way for upwards of 6 months.
We have a new Toshiba laptop running Windows 7 PremiumWe have a sitecom modem router which is fairly new and already providing wireless to 2 other computers.I have connected to the router with the new laptop but for some reason it keeps dropping off the network, either saying "limited access" or "no internet access"t is well within range so I cannot understand why it keeps dropping off the connectio
Is there a tool which can analyse the incoming and outgoing traffic on a computer hooked to the internet via a router.I would want to know the name of the program or application generating the outgoing traffic or receiving the incoming traffic and if possible the source of incoming traffic.I can read my Dir-628 router's log but all you really see are IP addresses.
With Norton 360 Antivirus, is there a feature that allows you to make it clear your hard drive of all unnecessary files that are slowing down the CPU? (similar to what the technicians for dell do when you call, they delete everything unnecessary) I've done the temporary file removal and it didn't do much, along with the full system scan. If Norton can't do this, is there any way to make a software go through the hard drive and delete all the crap?
first I replaced a new internal hard drive. Installed new and updated drivers. connected to the home wireless network. everything working well so far as of last week. this week, I replaced new battery and ran norton 360 updates. after the updated, I can't connect wirelessly to my home network. I checked if Norton is blocking the communication but I don't think it did.
Last year i installed nortor 360 gold edition onto my laptop and now it is telling me that it is not automatically protected against viruses and spyware, even though it has the latest update and no problems have been found on my laptop.
I recently removed trojan horse and malware using AVG. This was successfu,l but when I rebooted the machine it will not recognise any network connections, sound etc or operated software such as excel.ll the devices appear to be installed but won't work. When I try to open Intel it shows a message 'No supported wireless adapters available in the system'.
I have 2 ASA 5540's that I want to run in HA A/F. The active ASA has an IPS module running. I no longer need this and would rather remove it than purchase another module for the spare. What is the process to do this safely? After removal will the HA wizard recognize that the module was removed or do I have to update the software?
I've got a 3845 and a 2821 and I need to add another WAN interface card on each router and wonder if this can be done live while the router is running.
Is there a way on the security appliance SA520 to remove someone from the DHCP lease client manually rather than setting the DHCP lease time to expire in less time like 4 hours or 2 hours. I was able to do this on other routers by highlighting the connected device and click remove. If not any recommendations on how to handle the device that are attached via DHCP and the person is no longer here, but the lease time is not up. I have set DHCP lease time to 4 hours.
I am running Windows 7, Time Warner Cable is my ISP, I am using a Netgear wireless router, and a netgear wireless card to access the signal
The problem started a week ago. While playing online video games (Battlefield 2), I will get a message on my screen telling me theres a problem with my connection. Sometimes it will only freeze up for 5-7 seconds, and sometimes it is up long enough to make me lose connection to the server.I am not having ping problems, the server is not kicking me for that.All background programs are closed, ive tried restarting everything I have thats related to internet and my computer.
I have a 6500 switch and i recently removed a module (line card) from the switch. The problem is that the port configurations of the removed module still exhists in running configuration. I was not aware of the right procedure,[URL] however, i would like to know whether it resolves if i reboot the switch.
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
I have an asus K52f laptop running windows 7, and i cant connect to my schools wifi router, some Cisco model. However i can connect with my iTouch and most apple computers can connect. My friend who has an HP on Win7 was able to connect. I asked him how and he said something about changing the properties of the network card so it was on cisco. Im not sure what he meant, and when he tried on my computer he said i needed to update the card something
