Tool To Monitor Internet Connection And Bandwidth At Windows XP Desktop
Sep 26, 2011I need an tool to monitor the internet connection and bandwidth at my windows xp desktop.
View 4 Replies
ADVERTISEMENT
Cisco :: Use MRTG To Monitor DSL Connection Bandwidth Usage?
Jan 24, 2013I want to use MRTG to monitor my DSL connection bandwidth useage.
Should I monitor:
ATM 0/3/0 or
Dialer 1 or
Virtual-Access 2
ps. is the 'BW' aspect of show interfaces important? I have 56Kbit/sec on Dialer 1, 100,000 Kbit/sec on Dialer 1 and 1024Kbit/sec on ATM.
NSA 2400 - Tool To Monitor Web Traffic For One Specific User?
Feb 5, 2013I am trying to find a tool that will monitor the web traffic for one specific user. If it is capable of bundling it into a report that would also be a benefit. I have searched, but not come up with much aside from broad network monitoring tools. All that is really needed is to capture all the activity from http traffic for this one specific user/PC (since she uses the same PC all the time). We have a Sonicwall NSA 2400 as our internet filter, but I was not able to locate anything on there for specific user reporting.
View 2 Replies View RelatedHome Internet Bandwidth Usage Monitor?
May 6, 2011I have 4 laptops (WiFi), 2 desktops (LAN), xbox (LAN), and dish receiver (LAN) that are all connected to the internet using the method between the brackets. Recently i am running out of bandwidth, and what i am looking for is a freeware that i can install in one of the computers that could tell me which IP or MAC address used how much internet.I have read several articles: some articles point me to softwares which only monitor the computer that they are installed. Other posts argued that such thing can only be done through the main router. I know my router doesn't have such feature. I use SMC router.
View 3 Replies View RelatedE4200v1 - Monitor Home Network / Internet Bandwidth?
Apr 7, 2013I'm wondering if there is an easy way to monitor how much bandwidth is being consumed at any given moment for a home network.specifically, for the incoming/outgoing internet connection.My network is as thus:
DSL Modem -> Wifi Router (Linksys E4200v1 - PPPoE enabled here) -> Gigabit switch -> 2nd Wifi router (D-Link DIR-815 - DHCP disabled, repeats same SSID and password)
Most devices are connected directly into the switch, with one computer hard-plugged into the DIR-815 (I will eventually change this, as the 815 only has 10/100 ports).Basically, I want to easily be able to check how much up/down data is being sent for my internet connection. This means that I cannot use a program on a computer (I've used DL Meter before. Works great, but limited to a single computer).
The Linksys E4200v1 is using standard firmware, but I'm not opposed to loading DD-WRT onto it (was the original plan anyway, just never got around to it), if DD-WRT has this capability.Nice to have feature: Ability to see which devices are consuming what part of the bandwidth. Not necessary, but would be a cool feature.Alternatively, if there is a cheap (like $100 or less deal) box that can interface, say, between the E4200 and the switch, that can do this, that would work as well.
Internet Connection Sharing From Laptop (xp Sp2) To Desktop (windows 7 64x)?
May 10, 2011I want to share my adsl connection that is in my laptop running xp 32bit sp2, to my desktop pc running win 7 64 bit sp1. I also have xp in another hdd in the desktop from which i have connected the laptop with firewire. But win7 does not allow firewire networking. I don't wanna buy any new hardware.
View 5 Replies View RelatedSony VAIO Desktop / Losing Internet Connection On Windows XP?
Aug 18, 2011I have a Sony VAIO desktop, 5 years old running windows XP. Recently, I started getting ntoskrnl32 missing and refused to boot. My local computer guy said that it is a hard disk problem and ended up putting new hard disks and reinstalled XP. But I keep internet connection after about 5-10 minutes. If I disable and enable "Local Area Connection" it works for sometime and stops again. I have a Cisco wireless router that I use. I use that to browse with my iPhone as well.
View 1 Replies View RelatedCisco WAN :: Bandwidth Consumption Tool For 2851
Nov 27, 2011I currently have a 2851 router with 2Mbps point-to-point leased circuit on its serial interface and most of the time its congested. Any tool for measuring the current consumption that is happening on the link other than netflow.Was looking for something for a graph or chart displaying the current consumption rate.
View 2 Replies View RelatedNo Internet Connection After Running Norton Removal Tool
Mar 10, 2012I downloaded and ran the norton removal tool on my pc which has a wired connection to my router but when I restarted I had lost internet connection. I ran the diagnostic tool and it said 'Invalid IP address' and repeated 'Unexpected error from iphlpapi: The pipe is being closed' several times
I tried rebooting the router and the following -
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log But nothing has worked. The 3 laptops and Xbox connected to the router are still working fine.....
How To Monitor The Bandwidth
May 25, 2011I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras. Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work. At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down. We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down. How can u monitor the bandwidth on the switches? They are 24 port switches. The switch is fs750/24 switch.
View 3 Replies View RelatedHow To Monitor Bandwidth (40 - 50 Systems)
May 25, 2011I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras.Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work.At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down.We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down.
View 4 Replies View RelatedCisco :: Monitor PAT Bandwidth With SNMP?
Apr 4, 2012Is is possible to monitor bandwidth utilization of a PAT on an ASA? We're running version 8.2.
View 1 Replies View RelatedBandwidth Usage Monitor Software?
Apr 21, 2012Any reliable free software to monitor my bandwith usage for my home computer?
View 4 Replies View RelatedChanging Bandwidth And Monitor How Much Used For Network
Feb 6, 2013what part of active directory can you change your bandwith for the network and monitor how much bandwith is being used.
View 4 Replies View RelatedSolarwinds Bandwidth Monitor Setup?
Aug 10, 2012I came across some free bandwidth monitoring software by Solarwinds while doing some reading on other sites. I installed the software and now im stuck at setup. The Softaware is asking for...
Ip Address/Hostname
SNMP Version
Community string
I'm assuming the IP Address/Hostname would be my computers IPv4 on the network and as far as the SNMP Version goes im not sure, I can either choose from SNMP v1/2c or v3. For the community string, I'm assuming its Public but im not completely sure.When I attempt to go to the next step is says the credentials test failed So obviously something I entered is incorrect.
Note: this is on my own home network. Im using a Comcast all in one router and modem.
Dynamic Ip Notification Tool For Windows
Aug 30, 2011Does any know of a Windows utility than can send an alert via e-mail to me when my dynamic IP address changes?
View 5 Replies View RelatedRemote Desktop Connection Between Windows 7 And XP?
Dec 5, 2012I want to setup Remote desktop connection between PC's running win 7 and win xp so that i can access win xp machine through win 7. Both are connected through LAN connection.
View 2 Replies View RelatedWindows 7 Desktop Cannot Use The Ethernet Connection
Mar 3, 2013My Windows 7 desktop cannot use the ethernet connection for some reason while it works just fine on my Macbook Pro. When I run ipconfig in CMD I'm seeing a 169 IP address which from my googling of the issue I understand is invalid. When I run network diagnostics to try to fix it the result is that "Local Area Connection" doesn't have a valid IP configuration, and that this is now FIXED. My network and sharing center screen even claims I have internet access for a few seconds (instead of a red x between the network and internet icons) before dropping out again.I've been trying all kinds of stuff to try to fix this like ipconfig /release and /renew but this doesn't work because it says an address hasn't been associated with the network endpoint and so no operation can be performed "while it has its media disconnected."
View 9 Replies View RelatedWRT54G2 - Monitor And Limit Amount Of Bandwidth Everyone Uses?
Sep 10, 2012So lately this week, one rogue user from the boarding house has been downloading(possibly torrenting)/streaming to his/her heart's content resulting in extremely slow connections for everyone else. I've been using an Android app to list all devices connected to the network, and one-by-one, manually disconnected each one to find the problematic, bandwidth-hogging IP. I've found that said user continued to use up bandwidth even up to the wee hours of the morning.
I managed to find his/her IP address, I know I could just block sites/ports via the router's control panel but I guess it's not that simple because: a.) Whoever setup the wireless on our floor forgot the username/password combo(not even the landlady knows) b.) I've asked management about asking for access to the router. Being the IT student on the floor, I guess I'll take the responsibility of at least limiting the rogue user's bandwidth so everyone else on our floor has a fair share.
So my question is: is there a way to limit an IP/application's bandwidth usage via a non-router control panel method, without having to do a hard reset on the router? I have tried in vain to use the Android app I used, but all it takes is a router reboot to disable it (said user knows how to reset the router). It's been days since we've had a stable connection for legitimate schoolwork usage because of this one IP that's using up all the resources.
The router on our floor is a Linksys WRT54G2 and my operating system is Windows 7 64-bit.
Cisco LAN :: 2960S POE Switch - Monitor Network Bandwidth?
Aug 13, 2012I have a cisco catalyst 2960-s PoE switch. I have a web access to the switch and am able to get statistics on each port. However, I am wondering if there is a way to have a diagram of the trafic on each port?
Also, what is the best way to monitor the trafic on a router ( i have a cisci 1811W)
How To Use A Laptop Monitor For A Desktop
Feb 2, 2013Work with VNC to a remote computer. It has an old monitor with 800x600 resolution. Laptop that worker has higher resolution. How do I set a higher resolution monitor remote computer without buying one.
View 1 Replies View RelatedCisco :: Using SNMP To Monitor Bandwidth Utilization History ASA 5510
Dec 22, 2008I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies View RelatedPing To Keep Alive To Monitor If Provider Lost His Connection To The Internet
Oct 11, 2011I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies View RelatedWindows 7 Desktop - Local Area Connection Doesn't Have Valid IP Configuration
Oct 3, 2012Have a Windows 7 desktop connected to a Netgear Router via a cable modem. Computer network is setup a Home Network / Access Type: Internet. Error Message:"Local Area Connection" doesn't have a valid IP configuration. Problem is fixed but the problem starts again the next time I start the desktop. Receive the error message once again.
View 7 Replies View RelatedCisco Switching/Routing :: 3560 - Monitor Bandwidth Utilized By Servers In Network
Feb 6, 2013I have 5 linux and 3 Microsoft 2008 Servers, each connected to 2 Cisco 3560 Switches. The 2 Cisco 3560 switches are connected to 2 different Cisco 515e Pix. Is it possible that if i enable Port SPAN in any of the switchport and send a copy of traffic to any of the windows 2008 server, will i be able to monitor the bandwidth of the servers (Here I am only looking for traffic going from servers to PIX and then to internet, also vice versa).
Also will wireshark be able to differentiate specify the bandwidth of each servers seperately ?
Windows XP SP3 / Desktop Won't Connect To Internet
Nov 25, 2011I've got an older HP desktop that's running on Windows XP SP3 in my living room and it's all of a sudden not connecting to the internet. I know the problem isn't with the router or internet connection themselves, as my laptop works perfectly fine. I've tried resetting the TCP/IP, resetting the modem, and resetting the WINSOCK entries. Also, here is the IP configuration screen:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsowner2>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : powerpc
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
Linksys Wireless Router :: E4200 Blocking Windows Remote Desktop Connection?
Mar 7, 2012I just picked up the E4200 to replace a router, I can remote desktop into a computer that is physically connected to this router, but cannot remote desktop into other computers on the network that are connected via another switch.
View 1 Replies View RelatedWindows 7 Desktop Disconnected From Internet While Sitting Still
Aug 15, 2012I have a Windows Seven desktop that will disconnect from the internet ( It has a Ethernet cable directly to the router ) after sitting still for a few hours.my laptop has a Wifi card and works even when the Desktop doesn't.
View 4 Replies View RelatedHP Desktop Running Windows 7 Unable To Connect To Internet?
Dec 13, 2012in connecting my Hp Desktop to the internet. The PC is connected to my home network and I am able to download my email, I am able to print from the PC to my wireless pronter over the home network. All other PCs and devices in the hosue connect no problem.I have tried numerous solutions but still unable to resolve. I tried to hard wire it to the network, but I get Local access only. I am using Windows 7 operating system. I am connected to a netgear router.
View 8 Replies View RelatedNo Internet Connection On Desktop?
Feb 4, 2013i am using a laptop wireless and it connects fine, my desktop is connected to the router via Ethernet, packets are being sent ad received but still no connection, even tho it says i am connected
View 4 Replies View RelatedTool For Internet Traffic Analysis?
Oct 4, 2012Is there a tool which can analyse the incoming and outgoing traffic on a computer hooked to the internet via a router.I would want to know the name of the program or application generating the outgoing traffic or receiving the incoming traffic and if possible the source of incoming traffic.I can read my Dir-628 router's log but all you really see are IP addresses.
View 2 Replies View RelatedBandwidth Required For Remote Desktop?
Mar 11, 2011what will me the minimum requirement to have RDP in vpn?
View 2 Replies View RelatedRemote Desktop Connection Over Internet?
Jun 7, 2012I am having trouble connecting to my home computer from my work computer via the Windows Remote Desktop Connection app.On my home computer (win 7 pro) I have:
1. Allowed incoming remote desktop connections
2. Verified that the firewall is open for RDC
3. Forwarded port 3389 on my router to my devices static IP
4.Verified that I am using the correct IP (Router has a dynamic IP but I called home and had my wife read the current IP # from whatismyip.com)
5. Setup an account on the home computer that is password protected
I am connecting from a win XP pro computer.I receive 0% packet loss with reasonable time delay when pinging my home IP from the work computer.I also asked a family member to try from a different location (using Vista Ultimate) with the same result Error is that connection is never established and I am never prompted to logon to the home computer.I can connect via RDC when on the home network.