How To Monitor The Bandwidth
May 25, 2011
I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras. Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work. At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down. We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down. How can u monitor the bandwidth on the switches? They are 24 port switches. The switch is fs750/24 switch.
View 3 Replies
ADVERTISEMENT
May 25, 2011
I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras.Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work.At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down.We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down.
View 4 Replies
View Related
Apr 4, 2012
Is is possible to monitor bandwidth utilization of a PAT on an ASA? We're running version 8.2.
View 1 Replies
View Related
Apr 21, 2012
Any reliable free software to monitor my bandwith usage for my home computer?
View 4 Replies
View Related
Feb 6, 2013
what part of active directory can you change your bandwith for the network and monitor how much bandwith is being used.
View 4 Replies
View Related
Aug 10, 2012
I came across some free bandwidth monitoring software by Solarwinds while doing some reading on other sites. I installed the software and now im stuck at setup. The Softaware is asking for...
Ip Address/Hostname
SNMP Version
Community string
I'm assuming the IP Address/Hostname would be my computers IPv4 on the network and as far as the SNMP Version goes im not sure, I can either choose from SNMP v1/2c or v3. For the community string, I'm assuming its Public but im not completely sure.When I attempt to go to the next step is says the credentials test failed So obviously something I entered is incorrect.
Note: this is on my own home network. Im using a Comcast all in one router and modem.
View 1 Replies
View Related
May 6, 2011
I have 4 laptops (WiFi), 2 desktops (LAN), xbox (LAN), and dish receiver (LAN) that are all connected to the internet using the method between the brackets. Recently i am running out of bandwidth, and what i am looking for is a freeware that i can install in one of the computers that could tell me which IP or MAC address used how much internet.I have read several articles: some articles point me to softwares which only monitor the computer that they are installed. Other posts argued that such thing can only be done through the main router. I know my router doesn't have such feature. I use SMC router.
View 3 Replies
View Related
Sep 10, 2012
So lately this week, one rogue user from the boarding house has been downloading(possibly torrenting)/streaming to his/her heart's content resulting in extremely slow connections for everyone else. I've been using an Android app to list all devices connected to the network, and one-by-one, manually disconnected each one to find the problematic, bandwidth-hogging IP. I've found that said user continued to use up bandwidth even up to the wee hours of the morning.
I managed to find his/her IP address, I know I could just block sites/ports via the router's control panel but I guess it's not that simple because: a.) Whoever setup the wireless on our floor forgot the username/password combo(not even the landlady knows) b.) I've asked management about asking for access to the router. Being the IT student on the floor, I guess I'll take the responsibility of at least limiting the rogue user's bandwidth so everyone else on our floor has a fair share.
So my question is: is there a way to limit an IP/application's bandwidth usage via a non-router control panel method, without having to do a hard reset on the router? I have tried in vain to use the Android app I used, but all it takes is a router reboot to disable it (said user knows how to reset the router). It's been days since we've had a stable connection for legitimate schoolwork usage because of this one IP that's using up all the resources.
The router on our floor is a Linksys WRT54G2 and my operating system is Windows 7 64-bit.
View 1 Replies
View Related
Jan 24, 2013
I want to use MRTG to monitor my DSL connection bandwidth useage.
Should I monitor:
ATM 0/3/0 or
Dialer 1 or
Virtual-Access 2
ps. is the 'BW' aspect of show interfaces important? I have 56Kbit/sec on Dialer 1, 100,000 Kbit/sec on Dialer 1 and 1024Kbit/sec on ATM.
View 2 Replies
View Related
Aug 13, 2012
I have a cisco catalyst 2960-s PoE switch. I have a web access to the switch and am able to get statistics on each port. However, I am wondering if there is a way to have a diagram of the trafic on each port?
Also, what is the best way to monitor the trafic on a router ( i have a cisci 1811W)
View 9 Replies
View Related
Apr 7, 2013
I'm wondering if there is an easy way to monitor how much bandwidth is being consumed at any given moment for a home network.specifically, for the incoming/outgoing internet connection.My network is as thus:
DSL Modem -> Wifi Router (Linksys E4200v1 - PPPoE enabled here) -> Gigabit switch -> 2nd Wifi router (D-Link DIR-815 - DHCP disabled, repeats same SSID and password)
Most devices are connected directly into the switch, with one computer hard-plugged into the DIR-815 (I will eventually change this, as the 815 only has 10/100 ports).Basically, I want to easily be able to check how much up/down data is being sent for my internet connection. This means that I cannot use a program on a computer (I've used DL Meter before. Works great, but limited to a single computer).
The Linksys E4200v1 is using standard firmware, but I'm not opposed to loading DD-WRT onto it (was the original plan anyway, just never got around to it), if DD-WRT has this capability.Nice to have feature: Ability to see which devices are consuming what part of the bandwidth. Not necessary, but would be a cool feature.Alternatively, if there is a cheap (like $100 or less deal) box that can interface, say, between the E4200 and the switch, that can do this, that would work as well.
View 8 Replies
View Related
Sep 26, 2011
I need an tool to monitor the internet connection and bandwidth at my windows xp desktop.
View 4 Replies
View Related
Dec 22, 2008
I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies
View Related
Feb 6, 2013
I have 5 linux and 3 Microsoft 2008 Servers, each connected to 2 Cisco 3560 Switches. The 2 Cisco 3560 switches are connected to 2 different Cisco 515e Pix. Is it possible that if i enable Port SPAN in any of the switchport and send a copy of traffic to any of the windows 2008 server, will i be able to monitor the bandwidth of the servers (Here I am only looking for traffic going from servers to PIX and then to internet, also vice versa).
Also will wireshark be able to differentiate specify the bandwidth of each servers seperately ?
View 3 Replies
View Related
Sep 9, 2011
We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps
View 5 Replies
View Related
Sep 5, 2011
Watch TV on LCD monitor? To be exact, this monitor:
[code]....
View 2 Replies
View Related
Nov 19, 2011
Basically, I want to watch Hulu and other internet only entertainment, but I want to view it on my HDTV.
View 2 Replies
View Related
Feb 13, 2013
I would like to test a wireless connection by streaming video from one device to another,I would like to monitor the size of a playout buffer to gauge whether or not the link can sustain a high quality HD stream. Any software that will allow me to monitor the playout buffer?
View 1 Replies
View Related
Apr 9, 2011
page extends over sides of monitor
View 1 Replies
View Related
Nov 30, 2012
I have two computer but one monitor. and i wanna connect both computer with one monitor, one keyboard & one mouse. Like KVM switch. but if i connect with KVM switch then i can turn on one at a time & if i wanna use another one so i hv to turn off first one.
View 3 Replies
View Related
Jun 12, 2012
Let's say that I've multiple network (LAN A, LAN B, LAN C), how can I monitor all of these network.
View 1 Replies
View Related
Mar 15, 2011
I'm looking for temperature monitor (HDD, CPU) that can be run with parameters, and have cmd result output.I need some software to monitor temperature in Labtech software.
View 12 Replies
View Related
Jun 6, 2011
have hp omni 100 with winows 7 home premium and built in webcam,wanted to be able to either turn it on when i leave home or better yet turn it on from work and be able to monitor my residence dont have alot of money to spend on it
View 1 Replies
View Related
Feb 2, 2013
Work with VNC to a remote computer. It has an old monitor with 800x600 resolution. Laptop that worker has higher resolution. How do I set a higher resolution monitor remote computer without buying one.
View 1 Replies
View Related
Aug 11, 2012
I have a sony bravia tv that has wifi and supports dlna. And I have a desktop in another room, running windows xp. Since they both connected to the same network, is it possible to use the tv as another screen for the pc?( duplicate the screen, whatever i do on the pc will be shown on the tv screen) I'm installing a software that might stream content from the pc to the tv, but then i'm not hoping too much on it because the tv seems to be very picky about fCPUile formats... so i figured somehow duplicating the screen would be best if all else fails i'll just hook up the CPU to the TV.
View 1 Replies
View Related
Feb 11, 2012
I have a wireless router, a wirelessly connected smart tv, and a wirelessly connected laptop. Can I use my tv as a wireless monitor?
View 1 Replies
View Related
Aug 7, 2011
best way to monitor delay, latency and jitter between sites connected by VPN? I have CiscoWorks LMS 4.0 but that doesn not seem to be able to do the job (or I just don't know how to to it in LMS) Even a 3rd party application will do. I would prefer not to have to place hardware at each location though.
View 2 Replies
View Related
Oct 13, 2011
I have a cisco 2911 router that is located in my head office LAN and I use this router to connect to my branch networks. I want to configure IP SLA Monitor on this router to track my WAN Links but it does not support the command IP SLA Monitor. My IOS VERSION is c2900-universalk9-mz.SPA.151-2.T1.bin. how I can configure IP SLA on my router.
View 4 Replies
View Related
Dec 7, 2011
We are using LMS 4.0 in my office. We want to monitor our ISP router (cisco 888 or 892), the ISP open some MIB (IfMib and Cisco and these OID :1.3.6.1.2.1.2.2 / 1.3.6.1.2.1.31 / 1.3.6.1.2.1.4).
I use Cacti as LMS for the graph, in cacti I have the graph for the devices, but in LMS in the Topology Services, the router stay in red and in state Unreachable.Do you know what is the mechanism used by LMS to see the state of a device and which MIB or OID do I have to open on the routers?
View 3 Replies
View Related
Oct 12, 2011
I'm currently looking for a way to monitor a server's heartbeat, but to be able to inject that information into a router's routing table. I've googled this for a while, and come up with software called 'Quagga' or 'Xorp' which I understand is host-based routing software, but I don't quite understand if these satisfy what I need. Am I barking up the wrong tree or can I do this already with Cisco routers?
View 10 Replies
View Related
Oct 20, 2011
How to adjust picture on monitor when it is too far to the left of screen? I cannot see the Start menu on the monitor screen.
View 2 Replies
View Related
Jul 25, 2011
I have a 2008 R2 Server Running 2 Websites, 1 Lan card with 2 Different IP. I need to Monitor each IP to find out if one is creating a bottle neck for the other.E.g.
[code]...
View 4 Replies
View Related
Mar 9, 2011
In the company I work for, employees' internet traffic is monitored, and if you download too much, you get a warning, and later there might be more serious consequences. But they don't tell how many kilobytes are too much, and they also don't tell, how much of your "kilobyte budget" you have spent already. So I want to be able to monitor my own internet activity. However, all the programs I found so far watch the whole traffic going through the network card, which, beside the internet usage, includes LAN and mail server communication, which don't count. So, I'm looking for a free portable program that can monitor specifically my browser's internet usage, i.e. the number of kilobytes sent and received by the browser application. It is imperative that the program should be portable, or at least installable without administrator privileges, because I don't have that.
View 2 Replies
View Related
