How To Adjust Monitor Width
Apr 9, 2011page extends over sides of monitor
View 1 Replies
ADVERTISEMENT
Broadband :: How To Adjust Picture On Monitor
Oct 20, 2011How to adjust picture on monitor when it is too far to the left of screen? I cannot see the Start menu on the monitor screen.
View 2 Replies View RelatedDell :: Inspiron N5040 - Can't Adjust Brightness Of Monitor
Jul 6, 2013I have a dell inspiron N5040 laptop and i can't seem to adjust the brightness of my monitor, what driver or what do i need to download for this ?
View 1 Replies View RelatedD-Link DIR-655 :: Channel Width - Automatic Settings 20 / 40 MHZ?
Dec 28, 2011Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies View RelatedCisco Wireless :: 1262n - 40 MHz Channel Width On 802.11n
Mar 8, 2012I got new cisco aironet 1262n Dual band Access-point running IOS version 12.4(23c)JA .my question is does this access-point support 40 MHz channel width on the 2.4 Band on any IOS version as the command "Channel width" under interface dot11radio 0 allow only 20 MHz
View 18 Replies View RelatedLinksys Wireless Router :: EA6500 2.4 Ghz Channel Width / Speed
Nov 1, 2012What's the point for two options, auto or 20 mhz only? there is no third option so if you choose auto its still 20 mhz am i right?BTW i had to change channel width to 20 mhz only because under auto the speed was horrible.
View 3 Replies View RelatedLinksys Wireless Router :: Unable To Set 5ghz 80 Mhz Channel Width On EA6500
Mar 5, 2013My desktop pc has an Asus PCE-AC 66 PCI card (supports up to 1300 mbps wifi) and is only 5m or so away from the the EA6500 router without any obstructions - yet i cannot connect at 1300 mbps AC wifi. On the EA6500 router, i have selected 'mixed' as network mode under 5ghz (since i have some other devices which connect on wifi N on 5ghz) but if i select channel width as 80mhz, i have issues connecting to the 5ghz network on the desktop pc. The desktop briefly connects and under status it says lan speed as 1.3gbps but then it disconnects and i can't connect again. If i select channel width as 'auto' then no problems, the desktop can connect but lan speeds are only 400-600 mbps. why i cannot connect at 1300 mbps?
View 6 Replies View RelatedCisco Wireless :: Configuring 40mhz Width Channel On Aironet 1141
Dec 17, 2012recently we purchased cisco aironet AIR-AP1141N-E-K9 standalone model. after configuring it , client has no problem with connection and coverage, but there is problem with thoughput. clients are not able to connect at higher rates, even if i set channel width at 40 mhz, max rate for N capable client device is 54mb.
[URL]
How To Adjust Range Of Linksys Router
Jan 3, 2012i want my wifi connection all the way to my room
View 1 Replies View RelatedCisco WAN :: 1400 - Configuring Adjust-MSS / IP MTU In Same Tunnel
Apr 28, 2012I am using a GRE-IPSEC tunnel configuration + EIGRP routing protocol and I would like to confirm if I am right with the following:
Due to I am configuring the IP MTU = 1400 in the Tunnel interface, I am avoiding additional fragmentation after GRE encapsulation because there is enough room for IPSEC encapsulation (no matter which mode I am using - I am considering the worst case Tunnel Mode). However, I would like to know what happens if I ALSO include in the Tunnel configuration the command ip tcp adjust-mss 1360 which is clear operates in layer 4 during the 3 way handshaking process to establish the TCP connection/session between opposite hosts (in this case the interaction is with the respective end routers). By adding this MSS command, I understand that I could also eliminate the initial fragmentation of the 1500 bytes LAN packets (before GRE encap) because the hosts are notified to send 1360 bytes packets to the Router and based on the previous, I would be able to transfer packets without "theorical" fragmentation between both ends.
One more question, how can affect if I include this additional command (TCP ADJUST-MSS) the performance (process + memory) of a router 3845 or 7200 without producing for example a entire crash of the device???. I understand that this TCP MSS negotiation is router process intensive but is less than IPSEC encryption/decryption.
VS2008 / Windows 7 - Can't Adjust Screen Brightness?
Mar 8, 2012My laptop was working fine.Yesterday, I installed VS2008, Google Chrome, and MSDN.Today, when I start my laptop, the screen brightness goes very low when I reach the "enter your Windows 7 password" page.
I have a Sony Vaio vgn-nr11s/s Also, my wireless connection and LAN seems to have vanished into thin air.
Linksys Wireless Router :: E1200 Settings Allow To Adjust TX
Mar 30, 2013I'm currently looking at buying the E1200. confirm if the settings on this router allow you to adjust the TX (aka transmission strength)?
View 3 Replies View RelatedCisco Wireless :: Adjust Authentication Timeout WLC 2504?
Jun 12, 2013I have 2504 WLC with a few access points. the problem is when the PC's go in sleep mode, the users have to re-authenticate when they log in again Is there any way to let the PC's automatically re-authenticate without the user having to type in the credentials again?I have web authentication configured for this SSID and authentication is using the WLC local Data base.
View 6 Replies View RelatedLinksys Wireless Router :: Adjust Speed Settings Of E4200?
Nov 24, 2012Can I do this with a E4200? I want to do this for gaming reasons, and I mainly want to slow my speed down. I currently have my console hard wired to the router. I have accessed the firmware for the router but don't see how to change speeds.
View 2 Replies View RelatedCisco Switching/Routing :: 1456 Does MSS Get Increased With Ip Tcp Adjust-mss Command
May 6, 2012I just needed more insite into the function of the ip tcp adjust-mss command which can be used to adjust the MSS value in the tcp syn packet which passes that interface. But here is a question which I had. Consider that i have two sets of systems in my LAN one with an MTU value of 1300 ( MSS 1260 ) and with a MTU of 1500 ( MSS -1460 ). If I go ahead and put an ip tcp adjust-mss 1456 (for reducing the packet size from 1500 to 1496) on the WAN . Does the command only lower the MSS for the set of systems which have 1460 or will it also increase the MSS in the tcp syn packets send by systems with MSS of 1260 ( which can potentially break some communication ).
View 1 Replies View RelatedCisco Wireless :: Linksys X3000 / WAP200 - Can't Adjust Repeater Mode
Feb 6, 2013Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 1 Replies View RelatedCisco WAN :: 7613 How To Adjust Change Over Buffer Size At Link-set Sub-command
Apr 13, 2011I was wondering about command of Linkset subcommand at ITP7613.I have been using the Cisco7613 chassis for the ITP(SIGTRAN) service.
However, i know that the "tx-queue-depth" command is used for sctp multihoming buffersize that between primary and secondary path at the Link sub-command mode. but i can't adjust the changeover buffersize(retrieval buffer) that between link and another link at the Linkset subcommand mode.
It's above my comprehension.
My guess is that related to "plan-capacity-rcvd" command. it's right?I want to know command that adjust the buffersize of Link changeover.
Linksys Access Point :: X3000 And WAP200 - Can't Adjust Wireless Repeater Mode
Feb 7, 2013Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?
View 4 Replies View RelatedCisco Wireless :: 5508 Power Control Doesn't Seem To Adjust Radio Settings
Mar 17, 2013We hav ea 5508 pair running in HA mode. Initially the conrollers were running the 73..101.0 code. We were having issues where the primary controller would software reset (according to show sysinfo), the secondary (HA SKU) would take over and then after a few hours the secondary would also software reset and the primary would take over. Also I notice that after this happens that the Tx Power Control doesn't seem to adjust the A radio settings, most of the radios are at the 6 level. Normally they are 1, 2, or 3. Last week I upgraded to 7.3.112.0, later that day the same thing happened.
View 1 Replies View RelatedHow To Monitor The Bandwidth
May 25, 2011I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras. Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work. At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down. We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down. How can u monitor the bandwidth on the switches? They are 24 port switches. The switch is fs750/24 switch.
View 3 Replies View RelatedWatch TV On LCD Monitor?
Sep 5, 2011Watch TV on LCD monitor? To be exact, this monitor:
[code]....
Set PC Up To Use HDTV Like A Monitor?
Nov 19, 2011Basically, I want to watch Hulu and other internet only entertainment, but I want to view it on my HDTV.
View 2 Replies View RelatedMonitor A Playout Buffer?
Feb 13, 2013I would like to test a wireless connection by streaming video from one device to another,I would like to monitor the size of a playout buffer to gauge whether or not the link can sustain a high quality HD stream. Any software that will allow me to monitor the playout buffer?
View 1 Replies View RelatedHow To Connect Two Computers With One Monitor
Nov 30, 2012I have two computer but one monitor. and i wanna connect both computer with one monitor, one keyboard & one mouse. Like KVM switch. but if i connect with KVM switch then i can turn on one at a time & if i wanna use another one so i hv to turn off first one.
View 3 Replies View RelatedHow To Monitor Bandwidth (40 - 50 Systems)
May 25, 2011I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras.Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work.At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down.We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down.
View 4 Replies View RelatedHow To Monitor Multiple Network
Jun 12, 2012Let's say that I've multiple network (LAN A, LAN B, LAN C), how can I monitor all of these network.
View 1 Replies View RelatedTemperature Monitor With Cmd Output?
Mar 15, 2011I'm looking for temperature monitor (HDD, CPU) that can be run with parameters, and have cmd result output.I need some software to monitor temperature in Labtech software.
View 12 Replies View RelatedUse Own Webcam Remotely To Monitor While Being Away?
Jun 6, 2011have hp omni 100 with winows 7 home premium and built in webcam,wanted to be able to either turn it on when i leave home or better yet turn it on from work and be able to monitor my residence dont have alot of money to spend on it
View 1 Replies View RelatedHow To Use A Laptop Monitor For A Desktop
Feb 2, 2013Work with VNC to a remote computer. It has an old monitor with 800x600 resolution. Laptop that worker has higher resolution. How do I set a higher resolution monitor remote computer without buying one.
View 1 Replies View RelatedUse TV As Extended Monitor Wirelessly?
Aug 11, 2012I have a sony bravia tv that has wifi and supports dlna. And I have a desktop in another room, running windows xp. Since they both connected to the same network, is it possible to use the tv as another screen for the pc?( duplicate the screen, whatever i do on the pc will be shown on the tv screen) I'm installing a software that might stream content from the pc to the tv, but then i'm not hoping too much on it because the tv seems to be very picky about fCPUile formats... so i figured somehow duplicating the screen would be best if all else fails i'll just hook up the CPU to the TV.
View 1 Replies View RelatedUse My Smart Tv As A Wireless Monitor?
Feb 11, 2012I have a wireless router, a wirelessly connected smart tv, and a wirelessly connected laptop. Can I use my tv as a wireless monitor?
View 1 Replies View RelatedCisco :: LMS 4.0 / How To Monitor WAN Connections
Aug 7, 2011best way to monitor delay, latency and jitter between sites connected by VPN? I have CiscoWorks LMS 4.0 but that doesn not seem to be able to do the job (or I just don't know how to to it in LMS) Even a 3rd party application will do. I would prefer not to have to place hardware at each location though.
View 2 Replies View RelatedCisco WAN :: IP SLA Monitor On 2911?
Oct 13, 2011I have a cisco 2911 router that is located in my head office LAN and I use this router to connect to my branch networks. I want to configure IP SLA Monitor on this router to track my WAN Links but it does not support the command IP SLA Monitor. My IOS VERSION is c2900-universalk9-mz.SPA.151-2.T1.bin. how I can configure IP SLA on my router.
View 4 Replies View Related