Panasonic Cordless Phone Makes ADSL Malfunction?
Jul 1, 2011
We have 2 land lines in our house and I have an Adsl system installed on one of them (lets say line2)The problem is when I connect the panasonic cordless phone to line1, after 15 to 30 mins the adsl malfunctions on line2!I have checked the line1 with another panasonic cordless phone (older model) and the problem doesn't persist.I have used adsl filter and it didn't work and I can't throw out our new phone and use the old one!
View 5 Replies
ADVERTISEMENT
Sep 20, 2011
I have a cordless phone which broadcasts on 2.4ghz - when the phone is being used it cuts out the wifi. I thought that with the E2500 being a dual band - I wouldn't have this issue as I thought the router would switch to the 5 Ghz frequency if there was interference on the lower band. Maybe I am not understanding how the dual band works.
View 3 Replies
View Related
Apr 21, 2010
I'm having an issue with my work laptop. I'm just setting up a wireless connection for the first time. I bought the Linksys E1000. I have used this laptop at work and at hotels for a 54 MbPS connection. I set up the Linksys at home. It sees the network and will tell me that it is connection at 54 MbPS. Then it quickly goes down to 11 then 5.5 then 2. Eventually it runs so slow that I time out of the security portal at work because its so slow. Occasionally it even loses the network and has to find it again. I'm only about 20 feet away from where the router is located. I have hung up all cordless phones and turned off my cell phone.
View 2 Replies
View Related
Aug 22, 2012
I want to do this connection:-DSL cable--> Modem --> Wireless Router --> use WiFi on my mobile.Is it okay or I need a PC in between????? I don't have PC with WiFi Connectivity.....
View 6 Replies
View Related
Nov 7, 2008
I have a Dell Inspiron 6400 laptop running and with a Dell 1390 WLAN mini-card installed and a Broadcom 44/10x100 integrated controller.
Unfortunately I've never been able to get this laptop to function with my wireless Internet.
Everything's working out nicely, and the computer connects to the network smoothly. After 5-10 minutes of full and unproblematic Internet connection the computer crashes the wireless network i.e. the Inspiron and all other computeres connected to the network is disconnected and my wireless network no longer shows up on the list of available networks.
The network works perfectly with every other computer I've used with it.
I've installed the newest drivers for both the 1390 and the integrated controller from this site. And my Vista is of course also fully up to date.
I've also tried turning the antennae settings to "aux" - Alas, to no avail.
View 55 Replies
View Related
Feb 1, 2013
My house has wifi before phone guy came and set up wi fi cordless phones worked now it sounds like i am talking in a tunnel and the other party can not hear me.. my corded phone works fine phone company told me to get new cordless phones.. currently have 6.0 have tried 5.8.
View 1 Replies
View Related
Apr 12, 2011
register Panasonic Cordless phone - model - KX-TGP500.While configuring in CME - ephone - type (the list available is for only cisco models).how can i register this new model which the CME.
View 4 Replies
View Related
Jul 30, 2011
We're using our Sprint hot spot and want to make a wireless connection to the TV...can I use the AE1000 for this? If not, what do I need to use?
View 2 Replies
View Related
Jan 24, 2011
How do I connect my broadband router to my panasonic television to watch iplayer
View 4 Replies
View Related
Mar 12, 2012
I've switched over from a d-link dir-655 router to the v1 4200. I've been playing around with the 4200 and trying to get it connected to my tv all night long. I have two laptops and two iphones connecting with no issues. I cannot for the life of me get the tv (GT30) to work. It picks up three signals, the 2.4 signal, the 5 signal and the guest signal. The only one that will even connect to the internet is the guest signal. When I run the connection test, however it will not connect to the vierra connect server. I've tried setting it up manually, and anything else that seems obvious. I had no issue with the dlink router at all.
View 1 Replies
View Related
Aug 19, 2012
It is a wired, not wireless connection. The light isn't even coming on for the port it's plugged into. I tried a different cord, a different port, upgrading the firmware, and restarting each device. Nothing has worked so far.
View 9 Replies
View Related
Jan 24, 2011
I recently bought the Panasonic Viera THL37S25A TV and wanted to connect it to my home network. Just wondering whether the WUSB600N USB adapter will be compatible with the TV.
View 2 Replies
View Related
Sep 19, 2009
I use a Cisco 871W router for my office in home -- I have Wifi working and want to add my new Blu-Ray player to the network -- I bought a WAP54G to use as a wireless bridge assuming i woudl just connect the WAP to the BLU-Ray with a ethernet cord. The instructions for installation of the WAP include connecting it to my router for the set up but the installation disk says it is not recognizing the WAP. I use Brighthouse for my ISP and the connection sequence is BH Modem to teh Cisco 871W -- the 871W directly connects to my CPU and to a Net gear FS105 fast network Switch -- the swicth connects to my VOIP phone , HP printer and external HD back-up system -- there is an open port onthe FS105 and two open LAN ports on the 871W.
I tried to install the WAP but connecting it to both the router and the swtich without luck. Is the WAP what I need to connect the Blu-Ray --- am i missing something in the set up?
View 3 Replies
View Related
Aug 24, 2012
i have a problem with my adsl line connected on a HWIC-ADSL on router 2901 it was working good until yesterday the atm interface is down but the interface dialer is up .i connected this line into home adsl modem and the line is working good?
View 2 Replies
View Related
Dec 31, 2012
I recently hooked my router up to my cable modem and was disappointing to find my internet connection halved or worse. Here's all the relevant information I could think of.
Cable internet through JCOM (in Japan)
Router: WRT54GL V1.1
Modem: Motorola SURFboard SB6180
I have tried disabling the firewall on the router and adjusting the MTU. Both had zero affect.
Is there a possibility that installing a homebrew firmware like dd-wrt?
View 14 Replies
View Related
Nov 2, 2012
when the wireless router is plugged in to my acer desktop computer (running on windows 7) it will cause the desktop to reboot itself numerous times what do i need to do to make this stop so i can hook up wireless to the laptops i have?
View 1 Replies
View Related
Dec 20, 2012
I'm trying to get a static IP because I'm hosting a team fortress 2 server.So on windows, I made my internal IP static and that worked.On my router(cisco EPC 3925) you can go to administration ,then management and it says connection mode: DHCP which you can change to Static IP. When you change it to static IP it askes you:[CODE]
View 5 Replies
View Related
Oct 19, 2012
wireless connection of my router, which is a ZTE ZXV10 W300 provided by my ISP. Me and my brother have our PCs on the same room and have decent signal at all times. The problem is that when my sister connects her netbook to the network wifi becomes unusable for us. I mean normally ping to the router from my pc is 1ms and when she connects it will get to the thousands or even time out. My sisters netbook has an atheros 9285 card, and the other two computer have a d-link n adapter, and a us robotics g adapter. I have tried multiple configurations such as b/g or b/g/n, with wpa or wpa2 but the problem persists. I checked my sisters netbook for viruses thouroughly, with malwarebytes, microsoft security essential +2-3 other antiviruses and none found anyhting. I also updated her driver to the latest i found. I am getting desperate here, and i do wish i wont have to buy another router. Just to clarify the problem is not internet speed, should be able to handle (and used to be) 5-6 computers at once, it is the connection to the router itself.
View 5 Replies
View Related
Feb 16, 2011
The WAG120N makes a cracking noise on the conventional telephone.
View 1 Replies
View Related
Nov 1, 2011
As seen from the pic below, I have DIR-655 with hardware revision B1 and firmware version 2.0. The printed, online, and in router manual says that there should be ALG section at the bottom, but as you can see there is nothing there. Is there any setting that makes the ALG section hidden?
View 4 Replies
View Related
May 25, 2012
Hooked up router and my laptop is connected to internet. Tablet attempting to get my wifi says " obtaining IP address from linksys" buts never makes the connection. how to get connection and keeping a secure wireless connection?
Samsung Galaxy 10.1 tablet to Linksys Wireless G 2.4 GHz router model WRT54G v. 2
View 9 Replies
View Related
Jan 30, 2011
I work in a school department and wanted to hardwire two computers in my class using a workgroup switch. I only had one data port in my class. The tech guy told me the switch could cause the entire network to crash. Is that true? I thought a switch was just a passthrough device.
View 7 Replies
View Related
Sep 8, 2011
do you think there would be a visible (or negligible) difference in internet speed if I used a hardware firewall as opposed to the router's inbuilt firewall?So assuming that all switches/ports were Gigabit Ethernet compatible (including the firewall itself), would it be a better idea to turn off the router/modem's firewall and use the hardware firewall, or would it be best to just stick with the router firewall?The reasoning behind this is that I'm not a big fan of Netgear... or their firewall system. After recent DDoS attacks (and IP address changes), I've decided to put a computer that was lying around to good use - Use it as a (Linux) firewall. iptables, here we come. - Yes, the Netgear router (CVG824G) has died a few times. Probably going to get upgraded to a NG CG3000, which uses (more or less) the same firewall system, I assume.
View 6 Replies
View Related
Oct 15, 2011
I tried connecting someone else's laptop to a network cable but the laptop refused to detect the hardware device plugged?
View 1 Replies
View Related
Apr 14, 2013
Yesterday I was on my cousin's computer, and we had to remove the ethernet cord to connect it to mine as my wireless adapter wasn't cooperating with his internet. This was all fine and dandy until we had to plug the ethernet cord back into his computer. It locks everything up. If you try to open a program, it won't open. If a program is already open when the cord is plugged in, it stops responding within 15 seconds.I called my brother, and he suggested I run a virus scan via Microsoft Security Essentials and MalwareBytes, which I did. MalwareBytes found 5 problems, MSE found 1 additional one. They have all been removed, however this problem still persists. If you try to start the computer with the ethernet cord plugged in, it will allow him to put in his password, it will say welcome for about 3-5 minutes, then the screen will go black. The mouse is visible, doing it's motion to indicate that it's loading something, but it never achieves anything.
View 1 Replies
View Related
Apr 11, 2013
My router makes a clicking noise once in awhile.
I thought it might be other peripherals in my setup, but it is definitely the router. It sounds like it over heats at times and is the type of 'click' that is expanding or contracting.
View 1 Replies
View Related
Apr 30, 2013
My SURF N300 router makes my internet signal very weak, 1/10 of what was contracted but it works perfectly with the cable connected directly to the computer, how can I configure it to work properly?
View 1 Replies
View Related
Mar 14, 2012
I have on Desktop wired to the router which is my main pc. When I access internet the website load really slow, but when I connect the pc directly to Comcast modem, it's blitz fast. My internet speed is 15 Mbps. I have another desktop and laptop. None of them have the problem. What settings I have to change to get back to speed I used to have before.I messed up some settings on the Cisco Connect and accidentally reset the router. After re-installing the router the problem started.
View 9 Replies
View Related
Aug 28, 2011
I have an ASA 5505, firmware 7.2 (4). Configured ACLs, NAT, it's all working, but after a while it seems that running crashes, no longer makes the directions of NATs, the logs until they stop working. To resolve, I have to restart the ASA, and everything will work again.
View 2 Replies
View Related
Jan 12, 2011
I have a Panasonic Viera plasma tv (with no Wi-Fi) and as soon as i turn it on my wireless internet drops. It is a d-link 615 with a netgear modem attached. i cant find anything on the internet about it, have even tried changing every channel on the router and still no luck
View 4 Replies
View Related
Jul 25, 2011
I can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
View 1 Replies
View Related
Apr 21, 2012
I saw one post recommending to changing the MTU from 1500 to 1400. That did absolutely nothing. My comcast internet is now slower than 14.4 dial up modem I had 16 years ago. The strange thing is I can sometimes download at over 2 mbps with torrents. It's mainly loading websites where the speed is so bad.
View 9 Replies
View Related
Mar 22, 2011
The PPPoE connection can be successfully established only if the PC dials up, but not if the router replaces the PC to do so.Both the PC and the router are identically configured for this purpose, i.e. using the same ADSL dial-up account(usr/passwd pair). As a whole, we can exclude any wrong configuration on the router itself.
View 3 Replies
View Related
