Realtek 8111e Onboard LAN Not Connected
Feb 21, 2012
Earlier today i bought a new setup.
ASUS P8Z68-V LX
i5 2500k
Kingston HyperX 1600
Corsair Force 90GB ssd
ASUS GeForce GTX 560
OS: Win7
Everything works fine except the onboard lan doesn't work.Windows shows that there is no cable connected even though it is connected and it works. Currently I'm using the cable to write this on my laptop so that's proof that it indeed works. The bios settings for the adapter are set to enabled. I have tried the weird stuff, like unplugging for 30 min and starting again and reseting bios and holding the powerbutton for 10 sec with powercable unplugged.The cable shows that it's connected when i set speed and duplex at 10MB/s, full or half duplex, and I can ping the router but the internet eludes me.There has been no thunderstorm in the last 23 hours, I have tried the latest lan drivers from both Realtek and ASUS, there has been no windows update to mess with the system and I've tried formatting and setting up windows again.
View 3 Replies
ADVERTISEMENT
Mar 10, 2012
About two weeks ago, I took out the old motherboard of my HP computer and put in a new ASUS M4A88T-M. The board is amazing, especially for the money, except that I can't connect to the internet.So, for the last two weeks I've power-cycled about a billion times, ipconfig /this/that/and the next thing over and over, I've winsocked, I've turned programs on and off and on again, checked that the LAN is enabled in BIOS, firewall is off, and probably a bunch other things from the 100's of google pages I've searched.I spent 45 minutes on the phone with my ISP, and the guy was 99% sure there is something wrong with the NIC. Windows says that the device is working correctly, and I think that it is. There must be some setting, some driver, something that will reconnect me to the internet.
View 2 Replies
View Related
Feb 18, 2013
I have a Netgear FA311v2 Pci adapter and the onboard Realtek RTl8168/8111 PCI-E (NDIS 6.0) url...Which one should I use for Win7 64 bit? They are both fairly old and I am unsure as to which is best if I am doing a lot of FPS gaming.
View 8 Replies
View Related
Jan 22, 2011
I'm totally confused as to why the Internet on my PC isn't working. I had to format my hard drive yesterday but the back up disc I have wasn't working, so I reinstalled Windows XP straight from an XP disc. I was missing a few drivers which I've managed to find. One of the devices showing as unknown was the Ethernet Controller, which was preventing me from being able to use the Internet. I managed to find myself the drivers for this "Realtek RTL8139/810x Family Fast Ethernet NIC". Now no devices are showing as unknown, all are showing as working and the below screenshot shows that apparently I'm connected (via ethernet cable), but for some reason the Internet isn't working.
View 2 Replies
View Related
Dec 8, 2011
I use a MS-6728-090 (865PE Neo2p) and can't find the right driver for the onboard lan.
View 1 Replies
View Related
Mar 6, 2013
I have a Cisco 1921 which has a IPSec connection to the outside, but despite this, it seems the hw accelerator module is not used because the stats are all zeros (see below). Also, I can see that the module is enabled ( using show crypto engine brief ), but the connection are router to the sw module ( using show crypto engine connections flow )
gw#show crypto engine accelerator statistic
Device: Onboard VPN
Location: Onboard: 0
:Statistics for encryption device since the last clear
[Code].....
View 8 Replies
View Related
Feb 6, 2011
can you disable 3g adapter on board, and run a usb 802.11N wireless after disabling the 3g adapter?,
View 1 Replies
View Related
Dec 30, 2012
I'm having a problem with my onboard NVIDIA nForce Network Ethernet card. I have a XPS 730 running Windows 8 (64 bit). What is the most recent date of the driver for this adapter? I was attacked by a VERY bad virus (called SMALL) and have just got everything back to normal (I think). It may be possible that the driver for my network card is corrupted. Device Manager says driver is dated 2/23/2012 and the version is 7.3.1.7336. Is this correct? Two weeks ago the machine ran fine, Windows 8 installed without a problem.
View 1 Replies
View Related
Mar 26, 2012
computer keeps restarting whenever i connect my network cable.
View 1 Replies
View Related
Sep 22, 2012
At home I have a Cisco 877 router, I also have Optus Cable internet and Telstra Business Direct DSL. I have configured the ATM interface for the Telstra DSL connection through the onboard DSL interface. I have also configured Fast Ethernet port 0 as a vlan2 port, which is configured for use with the Optus Cable internet (this is connected through an Optus Netgear CG3000 router). The Nethgear has DHCP enabled (192.168.0.xxx range), as does my Cisco 877 (10.0.0.xxx range).Firstly, the Telstra Business DSL is due to be connected tomorrow between 9am and 1pm, so it is not physically connected as yet.From my laptop connected to fa3 and using Console connection, I can ping all of the 192.168.0.xxx addresses that exist, as well as my own laptop and a VoIP phone I have connected to fa2 (laptop is 10.0.0.100, VoIP phone is 10.0.0.101 both DHCP assigned, not MAC Reserved either).I can use internet explorer on my laptop to connect to the Netgear router, but no other internet pages. I also cannot connect to my Fuji-Xerox printer at 192.168.0.20 through the web browser, yet I can ping it from the router.I don't have a huge experience with Cisco as yet, and everything I have learnt has been basically self tought. I am looking into doing my CCNA, once I achieve enough funds Now, what I am trying to achieve ideally is, to combine both the Cable and DSL services to in effect double my speed? if this isnt available, a load-balancing type of scenario would also be good. Both DSL plans have a 500gb download limit, but the reason I needed the Telstra DSL is the VoIP phones I am using won't connect through Optus (Optus have locked nearly everything out), and Optus will not give me a STATIC IP address with the Cable, whereas I have on on the Telstra DSL, I would like to Remote Desktop into my main PC eventually.
The IOS on my router is: C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(6)T7
The Optus Cable Modem IP is 192.168.0.1, the Cisco 877 router IP is 10.0.0.1
The current config (complete, with username & passwords ### out) is below: (Bear in mind there's probably many things thats not needed.Once I get the router working, I will configure my 2960 switch and have all devices connected through this. All devices on my network do not need to stay in the 192 range, they can be 10.0.0.xxx. The DHCP could be disabled on the Netgear (Cable Modem) if that's required as well.
!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname N3813163R!boot-start-markerboot-end-marker!logging message-counter sysloglogging buffered 51200 warnings!no aaa new-modelclock timezone aest 10!crypto pki trustpoint TP-self-signed-116689578enrollment selfsignedsubject-name cn=IOS-Self-Signed-Certificate-116689578revocation-check nonersakeypair TP-self-signed-116689578!!crypto pki certificate chain TP-self-signed-116689578certificate self-signed 01 3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030 30312E30 2C060355 04031325 494F532D 53656C66
[code]....
View 5 Replies
View Related
Jun 28, 2011
We had a storm the power went out when the power came back and I started my computer I had no internet. It is a gateway desktop MFATXPNT YKT 500X bought in 2003. I have tried loading drivers no luck and I have tried a usb ethernet adapter in which the computer says it can't load the drivers.
View 1 Replies
View Related
Mar 28, 2011
I have an HP W7 (Home Premium) PC.
I have a wired connection (on-systemboard network interface) to a Belkin 54g router, but the router is not physically connected to the internet (no ethernet cable out to a cable modem/whatever). The router connects several necessary peripherals - mostly wirelessly to the main PC and another W7 PC.) All this stuff worked prior to a move to a new location.
There is freely accessible Wifi in range (public library - wherein I could concievably carry the whole PC and use their WiFi with their blessing).
I attached a USB Wifi adapter to the PC to avail myself of the free service, but W7 will not allow the Wifi adapter to be seen until I detach the ethernet wire. Then it will allow me to see the available network, and connect.
How does W7 (or the system board) look at network? Are they (onboard NIC and USB) mutually exclusive? Do I need a separate ethernet adapter card or a separate USB adapter card to create a different "channel" that would allow the two networks to coexist?
View 3 Replies
View Related
May 23, 2013
Is the onboard interfaces on an ASR router (4x on ASAR1002, 6x on ASR1002-X) are fixed gigabit or are they 10/100/1000 ?
I assume the interfaces on the 8port Gigabit SPA module are fixed gigabit speed ports (why otherwise sell a 10/100 8port SPA module also ?) no ?
View 2 Replies
View Related
Jan 15, 2013
tell me if cisco 1921 onboard GigabitEthernets can reach 10Mbps with concurrent services, one GigabitEthernet interface as WAN interface, the other one as LAN interface.
View 2 Replies
View Related
Nov 28, 2004
I have a dell Inspiron 8000. The computer will not detect the onboard ethernet jack? It does not show up in the devices list. The lights for activity will not come up when I plug an ehternet cable in to it either..
View 7 Replies
View Related
Jul 1, 2012
Can you configure a Cisco 1941 to use an 8 port EHWic module and the 2 onboard GE ports in a single LAN?
I've discovered you can't have the on GE ports associated with a VLan, and I'm when I've previously researched for a solution, bridging was mentioned but I cannot seem to get it to work (or completely understand it)The reason I would like to use all 10 ports on for the LAN is becuase I have 10 devices I need to connect to the 1941?
View 2 Replies
View Related
Feb 5, 2011
I just finished installing a realtek wireless lan but I don't know why in the tray says it is disconnected. I open the config utilily but I don't see anything to make it work. I'm using vista. I check here and I click the Radio check mark but doesn't seem to make any difference.
View 14 Replies
View Related
Jan 10, 2013
Just recently built a new system with this wifi card in it, and I am experiencing random lag spikes of up at 2000ms when pinging my E3000 router. I've tried the stock firmware on the router as well as the tomato variety I was using. I've tried both Windows 8 and Linuxmint 14 and the problem still exists. I did not have this issue on my laptop, nor do I have the problem with my wife's laptop. Is there any sort of setting in the bios that might affect this that I am overlooking?I'm about to just call timewarner and have them relocate the cable modem to this room so I do not have to deal with wireless.
View 4 Replies
View Related
Mar 25, 2013
I have accidentally deleted my realtek, how do I get that back? Accidentally deleted Realtek Driver
View 7 Replies
View Related
Sep 18, 2011
All of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies
View Related
Apr 23, 2013
Everything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies
View Related
Oct 18, 2011
I have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
View 2 Replies
View Related
Jul 11, 2011
I have a realtek wireless usb adaptor on my hp desktop that was working until I took it out of the usb on the front of the tower and plugged it into a usb on the back of the tower. Now I can't get internet at all even if I move it back to the front! My network doesn't show up under connections. Both the playstation 3 and the netbook are picking up the wireless signal from the router.
View 19 Replies
View Related
Jul 18, 2011
I have a Gigabyte motherboard that ive just installed into my dads new PC and the gigabit LAN has started taking 60 seconds to connect to router, very annoying...sitting with browser open waiting for it too connect... the issue seem to first appear during windows updates, i uninstalled device driver, rebooted and reinstalled the driver off disk... this sorted the issue.. THEN windows installed more updates, however these were nothing to do with networking (Office updates) and its back ...ive tried downloading the driver from gigabyte (newer) but still the problem persists...
Core-i5 2500k
4Gb 1600Mhz RAM
GTX 460 OC
60Gb SSD Vertex 2E
500Gb Seagate SATA-II
Gigabyte P67A-D3-B3
Windows 7 x64
View 2 Replies
View Related
Apr 14, 2011
I bought a reconditioned Dell Inspiron 1000 which had the above loaded. In fact, everything was ready loaded on the laptop, so I do not have any disks. My laptop started jamming and so I closed down all things open on it, which unfortunately included closing Realtek (which seemed to be always open). I then could not 'reopen' the Realtek stuff loaded, it wouldn't let me.I am using a Belkin wireless g card in the laptop which came supplied with it. I thought the Realtek stuff was to with this. My internet connection keeps failing for no reason now.I don't actually know what the Realtek software/drivers/whatever were doing.
View 3 Replies
View Related
Sep 26, 2012
I have just purchased a new laptop (HP Pavilion G series) for my studies at university. The wirless works fine when I am connect to my network at home, but I am only able to connect to the university's network when an ethernet cable is plugged in. Everybody else I know, who has a similar setup to myself has no problems connecting to the network without the ethernet cable and I was curious as to why this might be.
I am running on Windows 7 and the wifi adapter is a Realtek RTL8188CE 802.11b/g/n
As I say I am quite a rookie when it comes to computers
View 2 Replies
View Related
Sep 25, 2012
I recently replaced my harddisk and ever since I've been getting BSOD's whenever I try to watch a video online (no matter what website I'm on). I'm pretty sure it's not my GPU, because I can watch my own videos just fine. It could be the RAM,ause I ran Memtest86+ for 7 passes and it found two errors, but I have no problems playing games. So, I'm thinking it's my network-driver (Realtek) even though I already (re)installed the latest version[CODE]
View 1 Replies
View Related
Feb 21, 2013
Where can I get the driver for a Realtek RTL8168/8111 Family PCI-E Gigabit ethernet nic Lndi56.0
View 1 Replies
View Related
Dec 26, 2011
I accidentally uninstalled the RealTek Wi-fi Adapter and am freaking out.
View 1 Replies
View Related
Jun 24, 2012
When I install a micro-wifi-usb 802.11n with "Realtek RTL8188CU" on a old notebook with Windows XP I get maximum 1.5 to 2Mbits/s. Though installed on a newer notebook with Windows 7 I get 30Mbits/s.Other wifi-usb, Cisco Linksys WUSB100v2 does work on that Windows XP machine at 30Mbit/s, but the dongle is much larger The router Cisco WRT320N is just 5meters away and I always have excellent signal strength.I tried some other drivers without any luck. On the site of Realtek I don't find any driver except with some letter diverence at the end of RTL8188CU, which I also tried.
View 2 Replies
View Related
Sep 1, 2011
I recently said to hell with wireless and wired my apartment with Cat6. My desktop computer next to the router is running fine at 1Gbps. My media center one room over is only running at 100Mbps, and I cannot figure out why.
The motherboard has a Realtek RTL8168D . I have green ethernet enabled... could that be it? Auto disable gigabit is disabled. I tried changing speed & duplex from Auto to 1Gbps, and that didn't change anything. The latest driver is installed. Their ethernet diagnostic utility shows the link speed at 100.
View 18 Replies
View Related
Sep 7, 2012
realtek RTL8168/8111 ethernet Family PCI-E gigabit ethernet the question is written as above.can i use it to connect to internet in wireless?
View 1 Replies
View Related
Nov 3, 2012
I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies
View Related
