Realtek RTL8168 / 8111 Ethernet Support Wireless?
Sep 7, 2012realtek RTL8168/8111 ethernet Family PCI-E gigabit ethernet the question is written as above.can i use it to connect to internet in wireless?
View 1 Repliesrealtek RTL8168/8111 ethernet Family PCI-E gigabit ethernet the question is written as above.can i use it to connect to internet in wireless?
View 1 RepliesWhere can I get the driver for a Realtek RTL8168/8111 Family PCI-E Gigabit ethernet nic Lndi56.0
View 1 Replies View RelatedI have a Netgear FA311v2 Pci adapter and the onboard Realtek RTl8168/8111 PCI-E (NDIS 6.0) url...Which one should I use for Win7 64 bit? They are both fairly old and I am unsure as to which is best if I am doing a lot of FPS gaming.
View 8 Replies View RelatedI am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
View 9 Replies View RelatedRegion : Ireland
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I have my router updated with the latest firmware and I'm pretty sure all the settings are correct but I'm only getting a max transfer rate of 144Mbps. I know this because I use InSSIDer 3 to analyse my wifi network etc. I stream movies over my network and while DVD quality movies play fine, HD movies tend to freeze and buffer a lot. I have the router's channel width set to 40Mhz, so I know that's not the problem. Strangely, I also use a Netgear wifi extender with the MR3420 and it's max rate is 300Mbps.
Just got home from the Comcast store with a $7 rented modem just to last me until I do research and purchase one. I realize that this modem has only one Ethernet port with no WiFi support so I have another PC and a laptop sitting idle because there's no internet access. Did a quick search using Comcast's authorized modem's list and all of them only have a single Ethernet port and no WiFi. Is there a modem with multiple Ethernet ports with built in WiFi? I am getting almost 20mbps with a download speed of 4mb/s which is a HUGE improvement over my ATT DSL service that I've had since forever at 3mbps with a download speed of 300kb/s. I have no idea what technical specifications to look for in a cable modem to get 100% of full potential speed from my service without disconnects or other various problems.
I have a ATT U-Verse router sitting here right now, I am wondering if I can somehow connect it to my Comcast modem. I tried to connect the ATT router into Comcast modem via Ethernet cable, but I couldn't get past the "Your DSL service is unavailable" in the browser, but in my desktop system tray, it shows I am connected to the internet. If I could use this router, I would rather spend money on a modem instead of getting a combo.
does the WS-C2960-24TT-L switch support power over Ethernet ?
View 2 Replies View RelatedHave a potential customer that is looking at the IE2000 series switch and at the Rockwell Allen Bradley switch
Question is does it support Device Level Ring (DLR) capability. I do not see this specifically mentioned in the Data Sheets but it talks about a
Resilient Ethernet Protocol (REP) and I am wondering if this is the same thing?
I have a realtek wireless usb adaptor on my hp desktop that was working until I took it out of the usb on the front of the tower and plugged it into a usb on the back of the tower. Now I can't get internet at all even if I move it back to the front! My network doesn't show up under connections. Both the playstation 3 and the netbook are picking up the wireless signal from the router.
View 19 Replies View RelatedI have just purchased a new laptop (HP Pavilion G series) for my studies at university. The wirless works fine when I am connect to my network at home, but I am only able to connect to the university's network when an ethernet cable is plugged in. Everybody else I know, who has a similar setup to myself has no problems connecting to the network without the ethernet cable and I was curious as to why this might be.
I am running on Windows 7 and the wifi adapter is a Realtek RTL8188CE 802.11b/g/n
As I say I am quite a rookie when it comes to computers
When I install a micro-wifi-usb 802.11n with "Realtek RTL8188CU" on a old notebook with Windows XP I get maximum 1.5 to 2Mbits/s. Though installed on a newer notebook with Windows 7 I get 30Mbits/s.Other wifi-usb, Cisco Linksys WUSB100v2 does work on that Windows XP machine at 30Mbit/s, but the dongle is much larger The router Cisco WRT320N is just 5meters away and I always have excellent signal strength.I tried some other drivers without any luck. On the site of Realtek I don't find any driver except with some letter diverence at the end of RTL8188CU, which I also tried.
View 2 Replies View RelatedI've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies View RelatedIn device manager i have 4 yellow question marks where network adapters should be
View 2 Replies View RelatedI'm trying to connect to the internet on another PC (on my desktop, not this laptop I'm sending this request on). I know my network is working OK, because I'm on it now (on my laptop), but the Realtek adapter is not connecting on my destop PC.
View 14 Replies View RelatedI have a RealTek 8187 USB wireless adapter on my desktop computer that has an associated utility that allows me to manually select which of several competing WAP's to connect to. But that is good only for that particular adapter. My laptop has a different make of adapter that does not have this capability and many of my friends and neighbors lack the capability also. I have a situation where when I turn on my desktop, it automatically connects to a certain WAP, presumably because it has the strongest signal. However, at certain times of the day, traffic or other unknown interference blocks internet access for varying periods of time. I can usually go to my RealTek utility and switch connections to another WAP that has somewhat less signal strength (for example from Channel 1 to Channel 9 -- all within the same Wi-Fi network). Almost always I can restore internet access by doing this.is there generic software available that allows manually selecting WAP channels regardless of the particular brand of wireless adapter being used. Or is there some setting in either Windows XP or Windows 7 that would allow selectively choosing to connect to one channel of a network rather than another even if the signal strength is less.
View 5 Replies View RelatedI am running an ASUS laptop with Windows 7. My wireless has been working fine, but my room is quite far from the router, so I bought a signal-booster USB aerial made by Realtek (REALTEK 11n USB Wireless LAN Driver and Utility). It came with a small software CD too which I installed, and it worked fine for two days and boosted my wireless signal.However (you knew it was coming, the story can't stay happy) soon the red light on the USB booster stopped blinking and it showed the red 'x' where my wifi connections are. I couldn't get it to re-establish a connection without doing a full system restore and re-installing the USB signal booster, which would then work again for a short amount of time (maybe a day, maybe an hour). And worse, now when the USB booster is unplugged from the computer my laptop will not return to recognising wireless connections like it did before I installed the USB signal booster. It simply does not find any connections - the only time it does is directly after I have re-installed the software from the small disc which came with the Realtek USB signal booster.
I have now uninstalled the Software and anything made by Realtek but still it is finding no connections.Now I would just like to find a way to get back to where I started when my computer was finding all wireless connections like normal... a connection with a weak signal is better than this nightmare of constantly restoring my computer just to get a brief connection
got my router all set up running and working fine on my computer downstairs.. but my computer upstairs is what im trying to get wireless going.. guessing my network card dosent support wifi is why its not picking it /nor any other houses close to me.. my network card is realtek RTL 8168c / 8111c family pci-e gigabite ethernet NIC ( ndis 6.20 )could of sworn tho at my old house when i had my computer hookd up it picked up my neighbors routers above me .. currently its saying theres no routers or anything to connect too..
View 1 Replies View RelatedI recently bought a new Dell Inspiron 7600 pc running on windows 7 home premium and to enable access to our wireless internet I installed a Realtek 8185 wireless pci adaptor. It has worked fine (although not without the occasional blip) but recently it has stopped working. I could connect to our wireless network but connection came with a small exclamation mark on the wireless connection icon in the system tray. I tried reinstalling the most up to date drivers I could find on the realtek download website and this has removed the problem of the exclamation mark with the wireless connection claiming it now has internet access. However the internet is now so slow (vastly slower than before these problems began) I get timed out errors whenever I try to access any web pages. I have ruled out the router being an issue as my two housemates' computers are working just fine.
View 1 Replies View Relatedtrying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies View RelatedWill a realtek wireless network adapter connect to a Linksys WRT 110 router from a wood frame house to a concrete building approx. 100 ft. away
View 1 Replies View RelatedI need to reset my wireless adapter frequently Realtek RTL8188CE wireless Lan 802.11n PCI-E NIC after coming out of sleep. I am using WRT-120 router.
View 2 Replies View Relatedcan wireless router support up to 100 user including support network printer
View 1 Replies View RelatedI have just re-installed Windows Vista on my Toshiba Laptop and it connects fine to my virgin media router using a LAN line but when I try connecting wirelessly, no networks are found. I've tried up-dating the driver files form the C: drive(Window) and also from the net but with no joy.. Network adapter is a Realtek RTL 8187B. I hate admitting defeat as Im sure the solution is probably something simple..
View 3 Replies View RelatedI just finished installing a realtek wireless lan but I don't know why in the tray says it is disconnected. I open the config utilily but I don't see anything to make it work. I'm using vista. I check here and I click the Radio check mark but doesn't seem to make any difference.
View 14 Replies View RelatedJust recently built a new system with this wifi card in it, and I am experiencing random lag spikes of up at 2000ms when pinging my E3000 router. I've tried the stock firmware on the router as well as the tomato variety I was using. I've tried both Windows 8 and Linuxmint 14 and the problem still exists. I did not have this issue on my laptop, nor do I have the problem with my wife's laptop. Is there any sort of setting in the bios that might affect this that I am overlooking?I'm about to just call timewarner and have them relocate the cable modem to this room so I do not have to deal with wireless.
View 4 Replies View RelatedI have accidentally deleted my realtek, how do I get that back? Accidentally deleted Realtek Driver
View 7 Replies View RelatedAll of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies View RelatedEverything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies View RelatedI have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
Earlier today i bought a new setup.
ASUS P8Z68-V LX
i5 2500k
Kingston HyperX 1600
Corsair Force 90GB ssd
ASUS GeForce GTX 560
OS: Win7
Everything works fine except the onboard lan doesn't work.Windows shows that there is no cable connected even though it is connected and it works. Currently I'm using the cable to write this on my laptop so that's proof that it indeed works. The bios settings for the adapter are set to enabled. I have tried the weird stuff, like unplugging for 30 min and starting again and reseting bios and holding the powerbutton for 10 sec with powercable unplugged.The cable shows that it's connected when i set speed and duplex at 10MB/s, full or half duplex, and I can ping the router but the internet eludes me.There has been no thunderstorm in the last 23 hours, I have tried the latest lan drivers from both Realtek and ASUS, there has been no windows update to mess with the system and I've tried formatting and setting up windows again.
I have a Gigabyte motherboard that ive just installed into my dads new PC and the gigabit LAN has started taking 60 seconds to connect to router, very annoying...sitting with browser open waiting for it too connect... the issue seem to first appear during windows updates, i uninstalled device driver, rebooted and reinstalled the driver off disk... this sorted the issue.. THEN windows installed more updates, however these were nothing to do with networking (Office updates) and its back ...ive tried downloading the driver from gigabyte (newer) but still the problem persists...
Core-i5 2500k
4Gb 1600Mhz RAM
GTX 460 OC
60Gb SSD Vertex 2E
500Gb Seagate SATA-II
Gigabyte P67A-D3-B3
Windows 7 x64
I bought a reconditioned Dell Inspiron 1000 which had the above loaded. In fact, everything was ready loaded on the laptop, so I do not have any disks. My laptop started jamming and so I closed down all things open on it, which unfortunately included closing Realtek (which seemed to be always open). I then could not 'reopen' the Realtek stuff loaded, it wouldn't let me.I am using a Belkin wireless g card in the laptop which came supplied with it. I thought the Realtek stuff was to with this. My internet connection keeps failing for no reason now.I don't actually know what the Realtek software/drivers/whatever were doing.
View 3 Replies View RelatedI recently replaced my harddisk and ever since I've been getting BSOD's whenever I try to watch a video online (no matter what website I'm on). I'm pretty sure it's not my GPU, because I can watch my own videos just fine. It could be the RAM,ause I ran Memtest86+ for 7 passes and it found two errors, but I have no problems playing games. So, I'm thinking it's my network-driver (Realtek) even though I already (re)installed the latest version[CODE]
View 1 Replies View Related