Rosewill RNX EasyN4 Router / Cannot Find Installation CD
Jan 1, 2012
I am planning to set to my new house a secure network with Cisco firewall. I have practically no experience with firewalls and specially no with ASA programming. Still I have quite a clear picture what the system will look like. But when I first opened the ADSM screen I was freaked out about the amount of selections to be made. I cannot even figure out where I shoud start from! I am afraid that even thou I am very good with computers, it will take years to get understand all this data not to mention of configuring the device.
At the moment the situation is as follows:
- Firewall is set as factory default and it cannot not get to internet. I can't figure out what is blocking the traffic out. Logs does not work.
- Cable modem router has DHCP, NAT and SPI firewall ON.
- Outside has line/link up and IP is DHCP configured, but no traffic.
- 5505s' DHCP is now off but tested and working
- No VPN tunnels built (never built one and don't know how to do it)
- No extra routes / rules / profiles / policies etc. done. All is at default/auto status.
View 1 Replies
ADVERTISEMENT
Nov 19, 2011
What do I do if I cannot find the installation cd?
View 2 Replies
View Related
Mar 24, 2013
i have inspiron n5050 laptop with windows8 installed and i updated all drivers from the support and for bluetooth i installed DELL WLAN AND BLUETOOTH CLIENT ver9 after calling to customer support. but i cant find bluetooth suite in my computer and have no bluetooth option in wireless in my pc settings.
View 3 Replies
View Related
Oct 20, 2012
I have an Inspiron 1545 and I reinstalled Vista 32-bit, but I having problems with the comms driver (Conexant D400, External USB 56k Modem Rev : a05) and having the following message appear when I install the driver?
where to show MODEM?
View 1 Replies
View Related
Nov 22, 2011
Currently have a Westell DSL router running to a Rosewill 8 way switch, the problem I am encountering is that 1 Ethernet port will give me connectivity but the others will not. I've noticed when trying to have connectivity on 2 PCs, only one will work. I'm not sure whats going on?
View 2 Replies
View Related
Jul 20, 2011
Mobo: Gigabyte EP45-UD3R
OS W7 64-bit Home
Rosewill RNX-G300LX PCI b/g card
I've had problems with my current wireless PCI card in my desktop; it would drop the signal rather frequently and even make my router need a power recycle. . I don't know how that is even possible. Anyway I think it has to do with my PCI slot since I tested the card in another computer and it seems to work well.
That being the case I would like to get a PCI-express x1 wireless card. Or is it better to go usb? Wireless G is what I'm using currently. The desktop wireless space seems kind of lucrative. .
View 2 Replies
View Related
Oct 6, 2012
i have a Rosewill RNX-N180PCe Wireless LAN 802.11n PCI-E NIC and today when i turned my computer on i noticed a cation symbol on my internet access, it said that i have limited access and after going through the troubleshooting it said that my ip address is not valid, however when i connect via Ethernet i dont have any problems, also no other devices that require wireless internet access are having any problems, ive tried everything i can think of; checking for hardware changes, updating drive, disabling/enabling and nothing has worked
View 8 Replies
View Related
Jun 29, 2012
I have a Rosewill RNX N300X wireless adapter that keeps dropping to 1 mbps, and only goes up to about 18 mbps on a good day. How can I force a 54 mbps connection?
- I am running the latest drivers for the card.
- The network is "g", card accepts b/g/n.
- Another computer running RNX N360PC is getting a perfect connection on the same network.
View 4 Replies
View Related
Jul 12, 2013
this might sound straight forward, but every other pc or console can find and connect to my router.This issue seems to happen about once every few months, sometimes it comes back by itself and reconnects completely fine.
There isn't a "user limit" on our router.Wireless adapter is dell wireless 1505 draft 802.11n wlan mini-card.
Have restarted PC and uninstalled and reinstalled the card.I tried to set the i.p address to static but it says "adapter disconnected" so won't allow me to edit any settings, despite it being able to find neighbour's wireless very easily.
View 2 Replies
View Related
Apr 25, 2011
Does the E1000 router come with a default security setting upon installation using the supplied CD?
View 9 Replies
View Related
Jul 11, 2012
I am installing a security license on Cisco 2911 Router for the first time. It already has a temporary license installed on it which is expiring soon. Cisco has already mailed me the procedure for installation. I want to know if i need to uninstall the previous license before installing the new one.
View 2 Replies
View Related
May 29, 2012
How do I install or get a installation disk for D-link model dir-601 Router
View 1 Replies
View Related
Apr 22, 2007
How can I get a installation CD for a WRT54GX2 Wireless router? Can you download from internet?
View 3 Replies
View Related
Mar 27, 2011
I plan on replacing my linksys BEFW11S4 wireless router with a new linksys WRT120N wireless router. Should I completely remove and unplug the old router before inserting the startup CD and beginning the installation process for the new router?
View 3 Replies
View Related
Jun 3, 2013
Is there any risk to install an HWIC-2FE card into a production 3845 router while it is in a powered up state? Is it recommended to power it down first, then install it?
View 3 Replies
View Related
Oct 3, 2011
I have a dell Win XP need to connect to Belkin router
View 1 Replies
View Related
Mar 24, 2012
I currently have an E1000 router set up on a 2006 Dell PC as main hub of a network that includes kids' 2003 Dell PC (with a Cisco Connect USB receiver plugged in because it has no wireless capabilities) and wife's Dell laptop. We're about to change main desktop computer to an iMac (2011 refurb, won't be running Lion which I know there's issues with as far as Cisco Connect), give the 2006 Dell to kids and get rid of the old 2003 box. I cannot locate my installation CD, I'm sure it's somewhere in our rather cluttered computer area, although I understand I can download what I need. This probably is a dufus question, and I apologize in advance, it's just not clicking in my mind, but basically am I going to have to go back to step one, just like the first day I set up the router, as far as setting up our network?
View 3 Replies
View Related
Aug 1, 2011
I have a WRT120N router up and running in my home. I had the software (Network Magic) that came with the router installed on my old laptop. The hard drive died on the laptop and now I cannot seem to find the CD. When can I find an online download for the software?
View 1 Replies
View Related
Aug 1, 2012
I just bought EA4500. The CD come with it does not support Mac OS 10.8.
View 9 Replies
View Related
Aug 25, 2011
I just got a new WRT54GL wireless router to replace my WRT54GS failing router and I have a question. It's been awhile since I installed the old router and I remember something about not using the CD as it says before plugging in the new router because it messes everything up. All of my computers are running XP Pro SP3 with 2 of them being wired.
I remember something about just plugging the router in and typing in 192.168.1.1 in my browser and then setting everything up that way. Am I correct in doing this or am I forgetting something?
Oh, I am also running Network Magic so would I also have to reinstall it?
View 2 Replies
View Related
Aug 18, 2009
I bought a Linksys-Cisco wireless G Broadband Router model # WRT54G2 some time ago, and I never installed it. Now I cannot find the set up CD-ROM or the user guide CD-ROM. Is there a way to down load these from the product site...
View 9 Replies
View Related
Aug 17, 2011
I am installing the router but keep getting stuck on the 4th step and getting an error code 321. i currently have cable internet, which is working but when i follow the instructions it wont work. I cant access 192.168.1.1. I tried through google chrome and internet explorer but neither will recognize it. I just started school and would like to use wireless internet on my new laptop instead of cable on my desktop.
View 9 Replies
View Related
Feb 12, 2012
Bought a E2500 Linksys Router, i updated with Firmware Version 1.0.03 ( Build 4 )no problem,!! it is connected directly with a RJ45 Cable, router to Computer,no firewall on at all ,wide open yes i am on internet !! but here is the Problem i get everytime !! ---> ( Cisco Connect Setup Software For PC ) what it does is that it installs agreements etc.. password and all but near the end it tells me i am not on the internet you have been disconnected ! ;( and stops everything from continuing installation and i have to uninstall all from registry etc.. then re-install again and get same problem everytime i got a e3000 and it is great.
View 1 Replies
View Related
Jan 7, 2012
After popping in the installation CD, the screen says hook everything up, which I do. Then click next, where it says "Searching Networks", then quickly changes to "Connecting to Network", and then it says it "Cannot Find Router.". Err. Check setup, etc.If I hook up directly to new router VIA internet cable. Also, this is strange: When I just open up a web browser and try to log into the router 192.168.1.1, using no user name, administration as the password, it won't let me in to the router. Even after I have reset the router with a pen.
View 1 Replies
View Related
Jan 31, 2013
I have desktop and two laptops. I have DSL connected with my desktop only. If I'm gonna install E200 so I can use my laptops in internet, wouldn't it effect my dsl connection in my desktop?
View 1 Replies
View Related
Aug 7, 2012
Got the cisco EA4500 router, installed it and ran the set up disc. It downloads whatever it needs to download, then proceeds with a progress bar all the way to 100. Then it tells me my internet cable is unplugged, but I able to browse the intrnet, like now. It tells me to plug it in and hit next, I hit next and it eventually gives me the same message. I've tried unplugging my modem, resetting the router etc. But when trying to run the disc when it gets to that point it always tells me my internet is unplugged? I can even browse the internet while that message is up.
View 9 Replies
View Related
Jun 17, 2007
I've currently got a WRT54G and have an opportunity to buy a WRT54GS. The problem is that the seller of the WRT54GS has lost the Set-Up Wizard CD & Hard Copy Quick Installation Guide. Obviously I have these items already with my WRT54G. My question is this. Are these items different for the WRT54G or will the stuff I already have for the WRT54G "work" for the WRT54GS.
View 5 Replies
View Related
Jul 2, 2012
How can I do a VoIP Install/Repair?
View 3 Replies
View Related
Oct 19, 2011
Which are the cable use during network setup .thr saterlite procedure in transmitting information.The speed of transmission in information.
View 2 Replies
View Related
Mar 8, 2012
My ISP is Bright House. They installed a new modem a couple of weeks ago to fix the problem with the phone. Since then, however, only 1 of 2 PCs will go online. Everything's connected correctly, and it shows that there's a connection. Here's what I've tried so far, but to no avail:
Reset/replug everything.Manually set IP address and DNS settings.Using "ipconfig/renew" in command prompt to try and change the IP address.
I've talked to Bright House support about this, but they haven't been any hope. All they said was to contact the manufacturer of my router, but it looks like a discontinued model (some sort of Linksys). I bought a new D-Link EBR-2310 router, but I'm having problems with the installation of the firmware.
View 1 Replies
View Related
Apr 29, 2012
My hard drive crashed and had to reinstall my OS using manufacturers disk now everything works but the internet, the integrated ethernet card is not listed under network adapters in the device manager, its a clean install of windows xp media center edition 2005 sp2, the device manager shows no drivers missing.
View 5 Replies
View Related
Jul 18, 2012
Looking for some instruction on IP camera installation?
View 3 Replies
View Related
Sep 18, 2011
i lost my installation cd for my e1000
View 1 Replies
View Related
