I have CentOS and the application I am running does not listen on 192.168.1.5 (Private IP address). Right now I have connected using bridge mode and I can see in my network configuration-> ppp and eth0. PPP has public IP and eth0 has private IP. Is there any way that I can get public ip assigned to eth0? I do not have Static IP, I want to use the public dynamic IP assigned by my ISP to use in eth0 interface.
After a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.
How do i connect two internet routers to one IP address range?I currently have one broadband router connected on 172.16.0.3 subnet 255.255.0.0, I have a second line which is a copper ethernet EFM 2Mb line connected using a Cisco 1800 router configured on 172.16.0.254 subnet 255.255.255.0, no DHCP is configured on either router. the dhcp is provided by a windows 2003 server on our LAN which is also configured on the same LAN IP range. if i connect the Cisco router into the same switch as the broadband router my network devices stop working and dont respond.
If i check the broadband router it shows all the connections to it as having the same MAC address as the Cisco router?? if i disconnect the Cisco router everything returns back to normal and works perfectly.What I want to achieve is to be able to run both routers on the same LAN to provide internet access by configuring the pc's to route through a specific router. the DHCP I want to stay routed through my original broadband line. at the same time i want all pc's to access to the lan devices (ie. servers and printers) what the correct configuration would be for the two internet routers would be?
with a networking issue that I'm having with the 2nd computer I have trying to connect to the interntet via my Westell 7500 DSL router. I ran the diagnostic tool on the NIC to make sure it working correctly and it is, and so is the cable according the tools; I also verified that myself via unplugging/plugging the cable into the router and it detects eachMy other 2 computers work fine via the router.Here is the ipconfig info;Host Name:XXXXXXPrimary Dns Suffix: (blank)Node Type: HybridIP Routing Enabled: NoWINS Proxy Enabled: NoEthernet Adapter Local Area Connection:Connection-specific DNS suffix: (blank)Description: Intel(R) 82562V-2 10/100 Network ConnectionPhysical Address: 00-1D-09-8D-34-3BDHCP Enabled: Yes
I cannot connect to the Internet. I have a d-link router/modem combination DSL-2640B that was working on my old XP pc that died. My new laptop is a 64-bit Windows 7 machine that cannot see my router. I can connect to the Internet using my iPad. When I enter http://192.168.1.1, I get an error on EI 9 that says Internet Explorer cannot display the web page. Ipconfig returns an auto configuration address of 169.254.46.231 I cannot ping the router. I can't figure out how to get into my router to reset it. I have unplugged everything, flushed DNS, and restarted with no difference. I can't cut and paste because I cannot get to the Internet from my Laptop.
i am trying to hook up a laptop to internet that is over ten years old. when i try to set up a wireless network it say there's no dial tone. also when i start it up it says "Network Wireless Update, Router is unavailable". i was going to try an Ethernet cord but there is no Ethernet port on the laptop. what do i do?
I have installed 8 cameras that go to my 8 camera DVR. I have a 4 channel router that goes to my Comcast cable modem. I would like to view my cameras from anywhere that I can get on a computer. I have the DVD that came with my DVR and I don't know much about doing this kind of work. What do I have to do to view my cameras from any computer? My DVR is HS8308 8 channel Pentaplex H.264 DVR w/500GB HDD & DVD-RW What do I have to do to make this happen?
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
My problem is I can not connect to any ftp server or any database server using my home internet connection. But i can connect to the same servers using my work internet or even using my 3G mobile connection.I tried to contact with my service providers with no luck.I am using a Zyxel wireless router. Is there any settings in my router which stops me to connect those servers.
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
I have a working VPN with a WRVS4400N Wireless N VPN Router. There is a Windows XP computer on the network with a static IP address and a shared folder that I need to access with QuickBooks across the VPN.I can connect to the router; but only doing that is of little use. Once my VPN connection is made,how do I find the computer on the other side and map a drive to it or get it with QuickBooks? I need to do this with a Windows Vista Computer and a Windows XP computer at remote locations. Windows Vista seems to be different than XP in that it will not let me type a network address in Explorer without adding an HTTP://. Network places does not seem to work either.
I got a static ip from my isp. I set up my static ip manually through my linksy router. I need the static ip to connect to a private network for my new job but cant connect to that network. I went to whatsmyip and found that my old dynamic ip is still showing up externally, it looks like my ip4 is using the dynamic as a preferred. My question is do i need to manually change the network connection on my LAN and wireless connection under ipv4 to change it from automatically obtain TO use the following address and put in my static? And do I have to change the DNS also? I am on a home network with one desktop on vista home premium and laptop windows 7.
I bought a new laptop today, unfortunately, it doesnt have a Firewire port and i want to use it for video editing.But i figured no problem really, i'll just capture on my desktop that i have been previously using to edit on, using Premiere pro to edit, but HDVsplit to capture, and then transfer the files over to the laptop using a USB or possibly trying to setup a home network.But when transferring files from the desktop onto the laptop via the router using ethernet cables, the speed is about 250 kb/s and when its the other way around, from the laptop to the desktop, the speed is 10 MB/s! I really need to find away to speed this up as the overall files i want to transfer are over 5GB.You can read a bit more about it here: [URL]
my modem is working, I have two computers on the router plus my wireless is working.I connected my cable that was going from the modem to the router directly to the computer and it still says "network cable unplugged"sis 900 based PCI fast internet?