I have two routers (set up in two countries). I am using PPPOE to connect between the two routers. I use a laptop connected to my home network using router 1 to access the internet using router 2. i cannot set this up. I use Dlink routers. I tried giving the "default gateway" as router 2's IP address.
View 1 RepliesI changed my netgear wireless router password and now my laptop will not connect to the router or to the internet. It has no popup to put the new password. I have no problem logging on with my phone...just the laptop.
View 1 Replies View RelatedI have a router connected to my computer for the many laptops and netbooks used in my home. My computer is down for a bit.I have an internet card, but no one else can use their laptops/ netbooks.Can I also connect my router to my laptop for multiple use in the household?
View 2 Replies View RelatedI have a public IP (static). I have a Gateway machine which is connected through a modem. When I want to add that public IP to the Gateway Device through [URL] site.
View 3 Replies View RelatedThe wireless router PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network"It never works. I don't know how to fix this problem. It did not happen on my iPad.
View 2 Replies View RelatedHow can I turn my PC / Laptop running Windows XP into a wireless router so that I can use the internet in it through wifi enabled devices?
View 3 Replies View RelatedHow can I use the dual LAN of my PC to share internet with my notebook? The PC is at school where it uses a static IP and I would like to avoid buying a wireless router for this purpose.
View 3 Replies View Relatedmy computer will connect wired to internet and can find the wireless connection but wont connect. my wireless icon flashes intermitently and my mobile will work via wifi. do i need a new router this one is a G wireless Modem router Belkin had it for about 4 years?
View 4 Replies View RelatedHow to secure router on my mac - neighbor tapping into my internet service. How do I secure my Linksys router so only my laptop, desktop and iPad can use it? I tried going to 192.168.1.1 but got nothing?
View 5 Replies View Relatedipconfig /all reports one of my three DNS servers as 192.168.1.1. My Default Gateway and DHCP Server are also reported as 192.168.1.1. This is from a recently installed Valet M10 updating an old Linksys router. The Linksys reported the three DNS servers octets independent of the router's ip and other default settings.JK
View 1 Replies View Relatedrecently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies View RelatedI have a laptop connected to a net gear wireless router (for internet), but I am very close to buying a Belkin network USB hub to make my hard drive wireless, but this requires a router. I do not want move my hard drive to where my net gear router is, so I need to get another router, i am looking at a Belkin router so that I can make my hard drive wireless (This is the only reason for the router, it will not be used for internet) so I can keep my hard drive in the same place.
View 9 Replies View RelatedOne moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies View RelatedI've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.
I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...
View 0 Replies View RelatedI picked up a pair of RV220W's and before I spent loads of time at a remote site, I figured I'd go through some VPN testing at home to make sure I could get it setup properly. What this means is I've plugged the Internet uplink into a switch, then from the switch into both routers & configured them (using unique static IP's for each) from there. For what its worth: While I have some IT experience, I don't have strong networking experience.
I setup several VLAN's on the local RV220W, and the end result is to make it so that an asset at the remote site with an IP in any of the ranges (192.168.121.0/24, 192.168.131.0/24, 192.168.141.0/24 and any future VLANs) can communicate with/access resouces at the local site. Likewise, an asset at the local site with an IP in any of the ranges (.121, .131, .141 + any future VLANs) should be able to reach the remote resources (currently just 192.168.181.0/24, but future VLANs as well).
This evening I tried to focus on the relevant VPN pages of the Administration Guide to get the VPN up. Leaving the defaults I got as far as establishing a link between both sites and it seems that things are working right: From the remote site (.181) I can access the local site (.121, .131, .141); and from the local site I can at least ping resources (a laptop) on the remote site. (Yay!)
However, when I physically connected an asset that had a 192.168.121.X, 192.168.131.X and 192.168.141.X IP addresses to the remote RV220W (which is 192.168.181.0/24), I couldn't see it from the remote or local sites.I assume this is expected. But I'm reaching out to the community to see what other possibilities might be available becuase networking is a weak area for me. I figured it might be something like a Static [or Dynamic] Route but I really am not 100% sure.
'TECHNICAL' SPECS
Local Router LAN/WAN Settings:
LAN IP: 192.168.121.1 on default VLAN (1)
VLAN 13 defined 192.168.131.1 with DHCP enabled; Reservations created outside of DHCP scope
VLAN 14 defined 192.168.141.1 with DHCP enabled, Reservations created outside of DHCP scope
Inter VLAN Routing enabled for all VLANs
[URL]
I have a cable modem that operates cable tv, telephone, and internet. I am looking for the right router to purchase with the easiest set up.
View 1 Replies View RelatedWant to get on internet with personal laptop. Window that pops up shows [URL] as way to get in but it won't accept the password shown on Net Gear router. What else should we do?
View 1 Replies View RelatedCurrently i have my wired router connected to my modem, with three desktops connected to it. I just purchased a laptop, and would like to be able to get internet on it, my question is what are my options to get internet on my laptop [wireless] yet still keep the wired connections on the desktops as is? And if thats not an option what would be the easiest solution?My laptop has a built in built-in LAN (802.11n), built-in 10/100/1000 Mbps Ethernet LAN with RJ-45 connector for quick and easy wired Web connection.
View 1 Replies View Relatedi am trying to hook up a laptop to internet that is over ten years old. when i try to set up a wireless network it say there's no dial tone. also when i start it up it says "Network Wireless Update, Router is unavailable". i was going to try an Ethernet cord but there is no Ethernet port on the laptop. what do i do?
View 4 Replies View RelatedCan I have use a Gateway-to-Gateway IPSec tunnel whereby a user can surf the Internet using his local Internet connection and at the same time connect through the IPSec tunnel to a remote subnet using RVS4000 routers?
View 1 Replies View RelatedI have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does not connect back automatically, i have to log into either router console and click the connect button to get the tunnel working again, this is really annoying since it happens once or twice a day at least.
View 2 Replies View RelatedNew hardware here, requesting a bit of your knowledge, We are tryingin to setup a simple gateway to gateway VPN
HomeA Has an RV016 with a public static IP
Local Group Security Gateway type is IP Only with the IP
Local Security Group Type is Subnet, with the local IP class 192.160.0.0
Remote Security Gateway Type: Dynamic + Email
Email address some@emailaddress.com
Remote Security Group Type: Subnet
IP Address 192.168.1.0
IPSec Setup as default with nice password.
HomeB has an RV082 with a dynamic ADSL link
Local Group Security Gateway type is DynamicIP +Email
Email address some@emailaddress.com
Local Security Group Type is Subnet, with the local IP class 192.160.1.0
Remote Security Gateway Type: IP Only
Remote Security Group Type: Subnet
IP Address 192.168.0.0
IPSec Setup as default with nice password.
The idea is for HomeB which has a dynamic IP, to reach HomeA, which has a static IP and connect. But they just wont. I have not clue what's wrong, I followed the instructions, maybe i miss interpreted something. I could share the VPN logs for both., Im getting a lot of errors there.
I have a pair of RV082 routers and I'd like to configure gateway to gateway VPN tunnel as described in a cookbook, "How to configure a VPN tunnel that routes all traffic to the Remote Gateway," (file name Small_business_router_tunnel_Branch_to_Main.doc). I followed this cookbook and found that my while the Main office has internet connectivity, the branch subnet doesn't have internet connectivity.
Routing does behave as advertised, where all traffic does go to the main office. However, the 192.168.1.0 subnet in the branch office does not get internet connectivity. I've read in other posts that the Main office router will only provide NAT for the local subnet, not the branch office subnet. Is there a way to configure the RV082 router to provide NAT for all subnets?
If not, which Cisco product will provide the VPN Tunnel connectivity as well as the NAT for all subnets? Can the RV082 be used as part of the final solution or are my RV082s a wasted expenditure?
Following is the configuration that I'd implemented, (real IP and IKE keys are bogus).
Gateway To Gateway
Remote Main Office
Add a New Tunnel
Tunnel No. 1 2
Tunnel Name : n1-2122012_n2-1282012 n1-2122012_n2-1282012
Interface : WAN1 WAN1
[code].....
I have two Cisco RV8082 Routers which I would like to setup a VPN Tunnel with Gateway to Gateway. One location is a static IP Address. The other location is a dynamic IP address.
View 2 Replies View RelatedOkay, so our old computer took a dump & our friend rebuilt us a new one and he threw in a new router to go with it. Its a D-Link router, which is directly connected to our desktop. However, upon completion of a new desk installment, we put the router into the cabinet and my gateway laptop immediately stopped being able to connect to the internet or the router at all.
1) The router is connected to the internet and broadcasting.
2) I've reset and refreshed the router and my window of available networks on my laptop, which did not work.
3) I've pulled it out of the cabinet, which also had no affect.
4) I did a manual search for the router, and it says the network already exists and asks if i would like to connect and upon agreeing to this, it returns me to the page of available networks, which does not include my router.
I have a motorola usb modem which is connected to my laptop and i have shared the connection and have an ethernet cable from laptop to wireless modem (TP-LINK) such that other wifi enabled devices can connect to it.Now we have electricity blackouts and when that happens my wireless router gets turned off. Internet on the laptop is working fine, now when the electricity comes back and the wireless router is on, the net does not work on the other wifi devices and only my laptop (as its directly connected to the modem).I have to reboot my laptop for the shared connection to work.
View 2 Replies View RelatedI just bought a sony vaio laptop and I can't connect to the wireless network, it appears back and forward a message saying that the adapter is not found and then it says it is working and then it is not found again and so no.. Tried to connect the laptop using the WPS button but it did not work either.
View 1 Replies View RelatedI have a desktop connected to our work network. It's running XP Pro. I also have a laptop running vista home. Is there a way to hardwire that laptop to the desktop, so i can share files between those two computers, while ALSO keeping my desktop connected to my office network?Since it's vista home, I can't connect the laptop to our network, since it can only connect in workgroups, not networks. But if I'm just able to just use the laptop, create files, and then either save them to a shared folder with my desktop or just save them to the desktop with a switch or something, it wouldn't be a problem that my laptop can't connect to the network.
View 3 Replies View RelatedI've got a PC(windows 7) connected to a wired router(not wifi), and I also have a laptop that shares the internet with the PC using wifi. A wired printer is connected to the PC. Is it possible for me to share files and print using laptop? (Wifi Connected to a Wired Internet connection)
View 3 Replies View RelatedI am trying to set up a gateway to gateway VPN connection between a RV042G (central site) and a RV110W (newest firmware) which is used for presentation purposes on various customer's sites. The RV042G has a static IP. The RV110W has different IPs, depending on where it is used.
Basic VPN settings are clear to me (we have another VPN between two RV042G with static IPs). I set up the VPN connection on the RV042G wth the following settings for "Remote Group Setup":
Remote Security Gateway Type : IP + Domain Name (FQDN) Authentication IP by DNS resolved: mydomain.no-ip.org Domain Name: router12345
The value "router12345" is what I have configured in the RV110W as "Host name" in the network settings.
This configuration does not work so I am obviously doing something wrong. Do I have to use "router12345.mydomain.local" instead if I configured "mydomain.local" as the domain name in the RV110Ws network settings? For my tests the RV110W has a WAN-IP of 192.168.178.100 because it is located behind a DSL-Router. The external IP of this DSL-router is 178.0.x.x. The resolved IP from mydomain.no-ip-org is 192.168.178.100 but when I look in the RV042G log I see the requests coming withg the external IP (178.0.x.x). Is this the problem? The last message I see in the log is "no connection has been authorized with policy=PSK".
Or can I use "IP + Email Address (USER FQDN) Authentication" instead (where can I enter this email address in the RV110W?). Or do I have to use "Dynamic IP"?
acer laptop unable connect wireless to DSL-2730. connects OK through ethernet cable
View 4 Replies View Relatedtransferring a workgroup laptop to a office domain
View 1 Replies View Related