Routers / Switches :: Add Public IP To Gateway Machine?
Apr 4, 2011I have a public IP (static). I have a Gateway machine which is connected through a modem. When I want to add that public IP to the Gateway Device through [URL] site.
View 3 Replies
ADVERTISEMENT
Routers / Switches :: Setup Multiple Public IP's?
Apr 7, 2011At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?
View 2 Replies View RelatedRouters / Switches :: Public IPs Using A Soho Router?
Mar 7, 2011How can I give endpoints public IPs, that I can remote to or access (electronic whiteboard) from the Internet using a soho router? Will I need to purchase more than one public IPs or is there something I can do with subnet masking?
View 1 Replies View RelatedRouters / Switches :: Create A Public LAN Address?
Mar 7, 2011i want to connect dvr to the internet i need the step to take and process of creating a public LAN Address
View 1 Replies View RelatedRouters / Switches :: Forcing Laptop To Use A Second Router As Gateway?
Feb 25, 2012I have two routers (set up in two countries). I am using PPPOE to connect between the two routers. I use a laptop connected to my home network using router 1 to access the internet using router 2. i cannot set this up. I use Dlink routers. I tried giving the "default gateway" as router 2's IP address.
View 1 Replies View RelatedRouters / Switches :: DNS Servers Show Default Gateway As Server Ip?
Mar 24, 2011ipconfig /all reports one of my three DNS servers as 192.168.1.1. My Default Gateway and DHCP Server are also reported as 192.168.1.1. This is from a recently installed Valet M10 updating an old Linksys router. The Linksys reported the three DNS servers octets independent of the router's ip and other default settings.JK
View 1 Replies View RelatedRouters / Switches :: Default Gateway Ip Address Request Timed Out?
Jul 18, 2011recently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies View RelatedCisco Firewall :: 5510 No Machine Can Ping Out To Internet Gateway
Jul 25, 2012Switching out a 5510 as our primary firewall with a 5520. I've essentially copied the working config from the 5510, and put it on to the 5520, making small changes where necessary. Plug everything. I cannot get out to the internet.
Facts:
-All interfaces have no shut on them
-No machine can ping out to the internet gateway
-All machines can ping out to the inside interface of the firewall
-It's not a problem with the internet because I can take a laptop, enter in our outside interface information, plug it into the internet gateway, and I can get out to the internet just fine.
Cisco WAN :: How To Configure 857 As Public Gateway
May 25, 2012I have a set of public ip(/29) using adsl2+, is it possible to config cisco 857 as a public gateway so i can assign public ips to my computers?? before i upgrade to adsl2+ i was using cisco 678, it can be config as a public gateway without problem, but now i have ot use adsl2+, can't use cisco 678 anymore..
View 8 Replies View RelatedCisco Routers :: RV082 Gateway To Gateway VPN Not Resolving Remote DynDns
Feb 14, 2013I've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.
Cisco Routers :: How To Manage Port 80 Hosts Via Gateway To Gateway VPN (rv220w)
Aug 30, 2012I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...
View 0 Replies View RelatedCisco Routers :: RV220W Gateway-to-Gateway Inter VLAN Routing?
Jul 6, 2012I picked up a pair of RV220W's and before I spent loads of time at a remote site, I figured I'd go through some VPN testing at home to make sure I could get it setup properly. What this means is I've plugged the Internet uplink into a switch, then from the switch into both routers & configured them (using unique static IP's for each) from there. For what its worth: While I have some IT experience, I don't have strong networking experience.
I setup several VLAN's on the local RV220W, and the end result is to make it so that an asset at the remote site with an IP in any of the ranges (192.168.121.0/24, 192.168.131.0/24, 192.168.141.0/24 and any future VLANs) can communicate with/access resouces at the local site. Likewise, an asset at the local site with an IP in any of the ranges (.121, .131, .141 + any future VLANs) should be able to reach the remote resources (currently just 192.168.181.0/24, but future VLANs as well).
This evening I tried to focus on the relevant VPN pages of the Administration Guide to get the VPN up. Leaving the defaults I got as far as establishing a link between both sites and it seems that things are working right: From the remote site (.181) I can access the local site (.121, .131, .141); and from the local site I can at least ping resources (a laptop) on the remote site. (Yay!)
However, when I physically connected an asset that had a 192.168.121.X, 192.168.131.X and 192.168.141.X IP addresses to the remote RV220W (which is 192.168.181.0/24), I couldn't see it from the remote or local sites.I assume this is expected. But I'm reaching out to the community to see what other possibilities might be available becuase networking is a weak area for me. I figured it might be something like a Static [or Dynamic] Route but I really am not 100% sure.
'TECHNICAL' SPECS
Local Router LAN/WAN Settings:
LAN IP: 192.168.121.1 on default VLAN (1)
VLAN 13 defined 192.168.131.1 with DHCP enabled; Reservations created outside of DHCP scope
VLAN 14 defined 192.168.141.1 with DHCP enabled, Reservations created outside of DHCP scope
Inter VLAN Routing enabled for all VLANs
[URL]
Cisco Routers :: RVS4000 To Use A Gateway To Gateway IPSec Tunnel
Oct 17, 2011Can I have use a Gateway-to-Gateway IPSec tunnel whereby a user can surf the Internet using his local Internet connection and at the same time connect through the IPSec tunnel to a remote subnet using RVS4000 routers?
View 1 Replies View RelatedCisco Routers :: RV042 Gateway To Gateway Tunnels Not Reconnecting
Apr 11, 2013I have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does not connect back automatically, i have to log into either router console and click the connect button to get the tunnel working again, this is really annoying since it happens once or twice a day at least.
View 2 Replies View RelatedCisco Routers :: RV016 Gateway To Gateway RV082 Won't Connect
Mar 9, 2012New hardware here, requesting a bit of your knowledge, We are tryingin to setup a simple gateway to gateway VPN
HomeA Has an RV016 with a public static IP
Local Group Security Gateway type is IP Only with the IP
Local Security Group Type is Subnet, with the local IP class 192.160.0.0
Remote Security Gateway Type: Dynamic + Email
Email address some@emailaddress.com
Remote Security Group Type: Subnet
IP Address 192.168.1.0
IPSec Setup as default with nice password.
HomeB has an RV082 with a dynamic ADSL link
Local Group Security Gateway type is DynamicIP +Email
Email address some@emailaddress.com
Local Security Group Type is Subnet, with the local IP class 192.160.1.0
Remote Security Gateway Type: IP Only
Remote Security Group Type: Subnet
IP Address 192.168.0.0
IPSec Setup as default with nice password.
The idea is for HomeB which has a dynamic IP, to reach HomeA, which has a static IP and connect. But they just wont. I have not clue what's wrong, I followed the instructions, maybe i miss interpreted something. I could share the VPN logs for both., Im getting a lot of errors there.
Cisco Routers :: Getting VPN Gateway To Gateway With NAT For Multiple Subnets / RV082?
Feb 11, 2012I have a pair of RV082 routers and I'd like to configure gateway to gateway VPN tunnel as described in a cookbook, "How to configure a VPN tunnel that routes all traffic to the Remote Gateway," (file name Small_business_router_tunnel_Branch_to_Main.doc). I followed this cookbook and found that my while the Main office has internet connectivity, the branch subnet doesn't have internet connectivity.
Routing does behave as advertised, where all traffic does go to the main office. However, the 192.168.1.0 subnet in the branch office does not get internet connectivity. I've read in other posts that the Main office router will only provide NAT for the local subnet, not the branch office subnet. Is there a way to configure the RV082 router to provide NAT for all subnets?
If not, which Cisco product will provide the VPN Tunnel connectivity as well as the NAT for all subnets? Can the RV082 be used as part of the final solution or are my RV082s a wasted expenditure?
Following is the configuration that I'd implemented, (real IP and IKE keys are bogus).
Gateway To Gateway
Remote Main Office
Add a New Tunnel
Tunnel No. 1 2
Tunnel Name : n1-2122012_n2-1282012 n1-2122012_n2-1282012
Interface : WAN1 WAN1
[code].....
Cisco Routers :: RV8082 Setup A VPN Tunnel With Gateway-to-Gateway
Apr 8, 2012I have two Cisco RV8082 Routers which I would like to setup a VPN Tunnel with Gateway to Gateway. One location is a static IP Address. The other location is a dynamic IP address.
View 2 Replies View RelatedCisco Routers :: Gateway To Gateway VPN Between RV110W And RV042G?
Mar 19, 2013I am trying to set up a gateway to gateway VPN connection between a RV042G (central site) and a RV110W (newest firmware) which is used for presentation purposes on various customer's sites. The RV042G has a static IP. The RV110W has different IPs, depending on where it is used.
Basic VPN settings are clear to me (we have another VPN between two RV042G with static IPs). I set up the VPN connection on the RV042G wth the following settings for "Remote Group Setup":
Remote Security Gateway Type : IP + Domain Name (FQDN) Authentication IP by DNS resolved: mydomain.no-ip.org Domain Name: router12345
The value "router12345" is what I have configured in the RV110W as "Host name" in the network settings.
This configuration does not work so I am obviously doing something wrong. Do I have to use "router12345.mydomain.local" instead if I configured "mydomain.local" as the domain name in the RV110Ws network settings? For my tests the RV110W has a WAN-IP of 192.168.178.100 because it is located behind a DSL-Router. The external IP of this DSL-router is 178.0.x.x. The resolved IP from mydomain.no-ip-org is 192.168.178.100 but when I look in the RV042G log I see the requests coming withg the external IP (178.0.x.x). Is this the problem? The last message I see in the log is "no connection has been authorized with policy=PSK".
Or can I use "IP + Email Address (USER FQDN) Authentication" instead (where can I enter this email address in the RV110W?). Or do I have to use "Dynamic IP"?
Cisco Routers :: RV042G - Gateway To Gateway VPN
Dec 19, 2012I exchanged a RV042 v1.2 (Firmware 1.3.13.02) by a new RV042G v3. (Firmware 4.2.1.02).
My problem is now the following: The old RV042 established the Gateway to gateway VPN connection as soon as an IP- address of the remote location was requested. The new RV042G stays on „Waiting for connection“ all the time and does nothing at all. The connection works by clicking „CONNECT“ or by ticking Keep-Alive in the advanced tunnel settings but NOT automatically as before. Is this a firmware issue or have I to configure something additional?
Severe % Dropped Packets On XP Machine When Windows 7 Machine On Network Not Switch
Aug 2, 2011I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedInstalled Network Printer On Windows 7 Machine / Now XP Machine Won't Print To It
Jul 20, 2011New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedCisco Routers :: RV220W Windows 7 Machine Won't Connect SSL VPN
Mar 9, 2012I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
Cisco Switches :: 2960 - Password Less Log In With Public Key SSH Authentication
Apr 13, 2010I have a Catalyst 2960 switch (2960-8TC-L) and running Software version 12.2(53)SE1.I mange to configure SSH to the switch and add addition user as well.Now I need to configure this switch password less log in with public key SSH authentication.
I configured several Linux servers and Workstations for the public key SSH authentication.So far I could not figure out how to do this in CISCO switch. Following link {URL} how to do this.But ip ssh pub key- chain command never work showed invalid command.
Cisco Switches :: Setting Up Public / Private Vlans On Sg300-52?
Mar 25, 2013How to setup 3 SG300-52 (in L2 mode) as per this diagram:Port 1 on all switches should be able to talk to each other and access the blob at the right.The ports 25 on the other hand should only be able to talk among themselves in their own private vlan. They are to carry sensitive traffic. So I created 3 vlans, vlan 78 for ports gi1, gi51 and vlan 10 for port25,49,50 and a dummy vlan: 666 with the intent of segratating vlan 10 from vlan 78. My attempts so far have failed. ports gi49-50 are configured as trunk ports and gi1,gi51 as access ports as the following cli output (excerpts of the startup config):
vlan database
vlan 10,78,666
exit
interface vlan 1
ip address 172.16.10.11 255.255.255.0
[code]....
Ports gi1 can talk to each other and access the blob but ports 25 refuse to talk to each other. But as soon as I remove the access links to the blob they can! Obviously, at that point port gi1 lose access.Is such a topology feasable or even advisable?
Cisco Routers :: RV220W Machine Can't Send Or Receive Any Traffic To WAN Side
Aug 22, 2011I have a RV220W (running fw version 1.0.2.4) that i am trying to configure for a client. They are set up on Comcast with 13 available IP's. I should note that this netowrk is now currently running without issue using a Cisco Pix 506e. Unfortunately, the Pix is almost impossible to configure using the GUI now as I have to load a 4-year old version of Java now just to get the PDM to load. But I digress.I've set up the RV using the identical settings as the Pix on bth the LAN and WAN side. When I do, computers on the LAN side can all reach the Internet ok. However, once I enable one-to-one NAT for an internal server, that machine can't send or receive ANY traffic to the WAN side. I've even tried setting access rules enabling ANY traffic in both directions, and that has no effect. Either I'm missing something, or this is just one more bug in this product.
Even though it was a bit of a step down going from the Pix to the RV220W, it was done for the ease of setting up VPN's as I was ready to purchase a second one for a new satellite office opening in a few weeks. It looks like we will be switching vendors on the router side as my faith in Cisco is waning at this point.
Cisco Switches :: SG300 Public Key Accepted But Still Prompted For Username Password
Feb 5, 2013Trying to ssh from our QNAP to our switches and copy the running-config.These tests are on an SG-300. When ready well be doing the same thing on all of our 2960's. So maybe the SG300 is the problem.
View 1 Replies View RelatedCisco Routers :: Setup VPN Tunnel Between Linux Machine And RVS4000 At A Remote Site?
Jul 21, 2011I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?
Windows 7 Machine Does Not Detect Win Xp Machine
Apr 29, 2012I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedCisco Switches :: How To Use Different VLans Outside Another Gateway In SG-300 28
Mar 22, 2012How shall i use different vlans outside another gateway in sg-300 28? Example:
vlan2 192.168.2.0/24 gateway 192.168.2.1 outside router gateway 192.168.2.254
vlan3 192.168.3.0/24 gateway 192.168.3.1 outside router gateway 192.168.3.254
should me doing in sg-300 28?
Default Gateway Switches To Cable Modem?
Apr 28, 2012Lastnight I power cycled my cable modem, and router in an attempt to get a Slingbox to work. What ended up happening is that after the modem and router came back online all the computers on my wired home network changed their default gateway to the IP of the modem and not the router. Two of the computers are fixed now, but one of the laptops is still not able to get to the internet using DHCP. I can use a static IP with the correct default gateway for the router, and succesfully get to the internet, but then I can't see my server on my netowrk. And the same is true in reverse, in order to see my server I have to go back to DHCP, but I can't get on the internet
View 1 Replies View RelatedCisco Switches :: SG 300-52 VLAN Gateway Access?
Apr 17, 2011I’ve recently brought a SG 300-52 for my company with the main intention of using the L3 switching, I’ve recently gone on a 3day cisco course and came backing thinking i knew what i had to do but as always if you don’t have the experts next to you to answer the questions you soon have problems.
I have setup 3 VLANS, the switch is basically on its default settings and VLAN 1 connects straight to the router/gateway and on the internet but VLAN 2 and 3 do not, they are completely localy contained to their own Non DHCP networks.how do I get VLAN 2 and 3 on the internet and able to talk to each VLAN?
The keywords I’ve came across in my search are static routing between VLANs and InterVLAN, I’m assuming i need to do one of these??
Cisco Routers :: RV042G And Public IPs
Feb 6, 2013I have an issue with routing public IPs on the RV042G. I have been able to route the IP's in a couple of different ways, but there is always a nagging problem.
I have a PPPoE Business Class account with 5 routable public IP's. I would like to route the IPs and manage the private network using the RV042G.
Here is what I have tried and the problem that arose: 1) I used 1:1 NAT and the servers responded with no issue. This would be a workable config however I use Kerberos for single sign-on for my clients. To use this security protocol and bind the clients to the server, I must use a public IP on the server machines. In this scenario however, everything else worked fine. 2) I then tried using the DMZ and putting the servers on the DMZ port with a public IP entered in the network config of the machine. That even worked fine and I was excited until I noticed that the servers were reporting the public IP assigned to the DMZ port as their IP when they sent mail. I then ran a test and that is the case. The servers - each with a public IP - are reporting the IP of the DMZ port. I can't have that because the mail servers need to announce a correct IP so the reverse lookup will match. Once again, a little gnat gets in the soup.
What Determines Belkin Routers External / Public Ip
Sep 25, 2011I connect to the internet using a laptop and pick up a wireless signal from a Belkin router.The router receives its signal from a WOW dsl modem. If i plug my computer directly into the modem my public ip(the one i can view online) is completely different than it is when i have it plugged into the router.My modem ip has a 4 day lease period and then it renews. What im wondering is how this affects the public ip associated with my router. Does the independent public ip of my router act like a static ip? In the command prompt the router states that its internal ip expires in 2038.What does the routers internal ip address (192.168.?.?) have to do with the public ip address associated with the router? Or how is the public ip address of the router(not the modem ip) determined?
View 1 Replies View Related