Some day, then my internet jut died. then I got the router restarted(unplugged the electricity and plugged it back in) and it worked for like a day and then it died again. I restarted the router again Internet worked and then some hours later it died again.This problem only happens to me and not anyone else in the house.I'm connected from my pc with and ethernet cable to a switch/HUB where it's then connected to the router.
For the past few months my internet connection will randomly drop for about 5-10 seconds when someone else connects to the network. I am using a wired Ethernet connection and as said when someone connects either via WiFi or also through a wired connection, the internet for me will drop as soon as the device is connected, and then randomly every 20 minutes or so thereafter. I should also mention that rarely the connection will just drop for again, 5-10 seconds even when nobody else is connected.I tried my computer at someone else's house using their router and it worked fine, no disconnects at all.
* WiFi router (Netgear WPN824v2) connected to ADSL modem
* CPU, iPhone and iPad connected to router, CPU wired connection.Everything has worked like a charm up until a couple of days ago. Now the link between the router WAN port and the modem randomly drops. Stays dropped for 1-3 secs and then connect again. When its really bad this happens with 5-10 secs intervall. This made it impossible to use the network from any of the devices.If I disconnect the CPU from the router and connect it direcly to the modem and change the IP settings to match the modem network the CPU connects without errors to the internet, iPad and iPhone connected to the router keeps having problems.Restarting the router does not change anything and it seems to be more frequent errors during heavy load hours, in the morning I have almost no problems at all, in the evenings I cant almost use the wireless devices (CPU works fine as its now connected directly to the modem not through the router).I havent changed a setting in the last year, it just came right out of the blue.I have hard reset both the modem and the router and reconfigured them (that I dont want to do again as I have some virtual servers, port forwards, port triggers and so on :P).As it came right out of the blue without me changing anything on any device and as it seems to be more frequent during heavy load hours I'm suspecting that the ISP is involved, but how can they be (it works fine with devices connected straight to the modem)?
I have been using one wireless router which is working fine, but i have decided to add another wireless router downstairs to better the signal by putting the internet wire into the router. But when i do this both the routers work fine for 10mins, as i am able to browse the internet etc but then everything stops working from both routers. It shows on my computer and iPad as connected as they have full signal strength but no webpage loads.
i have been having issues with my internet for months now, my router just randomly loses its internet connection over and over everyday. I used to have slow internet with verizon so i changed to comcast and after i changed to comcast this problem started, when i called comcast they said that it has to be interference from an unknown source. I have a Wireless-N 150 Router model WNR1000v2 and it came with a modem. Things i have tried are changing my security to WPA2-PSK[AES] which it saiid would increase my connectivity..did not, i have changed my channel also didnt solve the problem. I have had this problem with 2 different routers and modems so far. And i have 2 desktops and 2 laptops connected to this. 1 desktop is hooked straight into the router and the other 3 are wireless.
I have two wifi routers which I have connected together with an ethernet cable to extend coverage across my house. The ethernet cable is connected to a LAN port on the first router and the internet port of the second router. This works fine and creates a second network that I can connect to the net on. The problem iseemingly randomly, about every 15 minutes, the second router will lose internet connection. My laptops and phone still stay connected to it, but windows lists it as having no internet connection. If I then wait a couple of minutes and reconnect, internet will be working again.
I went through the hoops with my ISP (knology) and they are adamant that it is the router that is the problem. I've tried two different routers, an E2000 and a wrt120n (it may be 160n..).. both do the same exact thing. I'm extremely tired of it. I was told it could be an IP issue or something related to DHCP.
Problem: Internet 'lags out' every 10-15 minutes for approximately 3-10 seconds. It only does this when I'm connected through the router and never when I'm plugged directly into the modem. It happens most commonly when my brother and I are both online at the same time. It's rare when we only one of us is online.
i want to ask if i can link two routers while they are totally separated of each other over the internet to make a large LAN the two routers are TP link?
How do i connect two internet routers to one IP address range?I currently have one broadband router connected on 172.16.0.3 subnet 255.255.0.0, I have a second line which is a copper ethernet EFM 2Mb line connected using a Cisco 1800 router configured on 172.16.0.254 subnet 255.255.255.0, no DHCP is configured on either router. the dhcp is provided by a windows 2003 server on our LAN which is also configured on the same LAN IP range. if i connect the Cisco router into the same switch as the broadband router my network devices stop working and dont respond.
If i check the broadband router it shows all the connections to it as having the same MAC address as the Cisco router?? if i disconnect the Cisco router everything returns back to normal and works perfectly.What I want to achieve is to be able to run both routers on the same LAN to provide internet access by configuring the pc's to route through a specific router. the DHCP I want to stay routed through my original broadband line. at the same time i want all pc's to access to the lan devices (ie. servers and printers) what the correct configuration would be for the two internet routers would be?
with a networking issue that I'm having with the 2nd computer I have trying to connect to the interntet via my Westell 7500 DSL router. I ran the diagnostic tool on the NIC to make sure it working correctly and it is, and so is the cable according the tools; I also verified that myself via unplugging/plugging the cable into the router and it detects eachMy other 2 computers work fine via the router.Here is the ipconfig info;Host Name:XXXXXXPrimary Dns Suffix: (blank)Node Type: HybridIP Routing Enabled: NoWINS Proxy Enabled: NoEthernet Adapter Local Area Connection:Connection-specific DNS suffix: (blank)Description: Intel(R) 82562V-2 10/100 Network ConnectionPhysical Address: 00-1D-09-8D-34-3BDHCP Enabled: Yes
The connection of the computer before is activating.. after how many days of using,it losses the internet connection.. what is the possible reason for this?
I have an ARRIS modem supplied by Comcast cable. I have an hp pavilion x1958 and want to run internet service to a secondary computer from the same modem. And I don't have money to buy a router. How can I do this the cheapest way?
I have a cricket broadband modem to connect to the internet. I want to use my Dlink di-524 router to share that internet connection with the other computers on my network. How do I do this?
I have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.
I have a USB modem connection, and i want to share the connection with two computers and three wireless devices through a sky router. The system OS is Windows 7
I have a Netgear WNR3500L with a Comcast cable modem. The internet was running slow so I rebooted everything. After that I could not see the internet. I tried to reset the Netgear Router, shut down and restart and still the same problem. I plugged the computer directly into the cable modem and everthing works just fine. I'm guessing something happened to the Netgear router but I don't know if it is a setting or something happened to the router itself. The router is about a year old. I can use the default 192.168.1.1 to get into the router but I'm not sure what settings I should try to change.
Want to get on internet with personal laptop. Window that pops up shows [URL] as way to get in but it won't accept the password shown on Net Gear router. What else should we do?
I am able to access the internet. I am running Windows 7 on my laptop and have a wired connection between it and my intergrated router. The internet works fine, but it seems to think that I am not connected to the network. I'm not certain it realized that I even had a network, since when I try to activate media sharing it just gets stuck at "Identifying Network". The whole purpose of this is to be able to play music from my computer on my Xbox 360, alternative solutions for this goal would be good too.
My office pc internet ADSL router is connected on USB port and office intranet router is connected to LAN post throuh a CAT-5 cable.Both have different gateways.I have manually configured both USB and LAN but internet and intranet does nt work together.I am required to disable one connection to connect the othet one.I want to remotely connect to my office pc and work on intranet( oracle database) .i connect through team viewer but as internet is on,intranet does nt open.i tried to add intranet gateway throuh command line also but it did nt work.office pc is xp ..home pc is vista..
ive been having some issues with my internet, i had an attack on my pc recently by some american orginization, ive reinstalled new windows on my pc, reset my modem, and nothign seems to work, i have too many tunnel adapters in cmd ip config i think, bell canada hooked up my internet lines and they actually joined two or more wires together and strung them up on the neighbours fence and mine and even wrapped it around a tree branch, god knows why they would even do that, maybe they think when the tree grows it will cost me money to fix it and theyll earn from thier mistakes instead of learn from them... anyway this is my ipconfig test results as explained in previous post from someone.Windows IP Configuration[CODE]
Currently i have my wired router connected to my modem, with three desktops connected to it. I just purchased a laptop, and would like to be able to get internet on it, my question is what are my options to get internet on my laptop [wireless] yet still keep the wired connections on the desktops as is? And if thats not an option what would be the easiest solution?My laptop has a built in built-in LAN (802.11n), built-in 10/100/1000 Mbps Ethernet LAN with RJ-45 connector for quick and easy wired Web connection.
we have a d-link router and anybody that comes to the house cannot connect to the internet. If I don't want just anybody to use our connection, what do I have to do to allow people I want to use it?
I have two laptops that work great with the router we have on my desktop. My tablet, however, will not connect. It does connect at my local office, where I'm using the exact same router.
I have High Speed Charter Internet going to a modem in form of coaxial cable with one Ethernet port available and one coaxial connection for TV and a phone jack. I have that Ethernet port connected to a:Motorola Wireless Modem[CODE]
i have a slow internet but my friend who live canada have high speed internet can use his internet . i do not want use his remote his computer but internet
I cannot connect to the Internet. I have a d-link router/modem combination DSL-2640B that was working on my old XP pc that died. My new laptop is a 64-bit Windows 7 machine that cannot see my router. I can connect to the Internet using my iPad. When I enter http://192.168.1.1, I get an error on EI 9 that says Internet Explorer cannot display the web page. Ipconfig returns an auto configuration address of 169.254.46.231 I cannot ping the router. I can't figure out how to get into my router to reset it. I have unplugged everything, flushed DNS, and restarted with no difference. I can't cut and paste because I cannot get to the Internet from my Laptop.
i am trying to hook up a laptop to internet that is over ten years old. when i try to set up a wireless network it say there's no dial tone. also when i start it up it says "Network Wireless Update, Router is unavailable". i was going to try an Ethernet cord but there is no Ethernet port on the laptop. what do i do?
Lost access to internet on all wired comupters. Can still connect to router via wired computers but not beyond. Wired PS 3 and wireless still connect to internetUsing a D-link dir 655 router
