IE cannot display website 192.168.0.1 so that I can set my password on my Dlink DIR-600 wireless router. I can however ping the website. Also, I can reach the website with my iPod Touch, yet I cannot set the password using my iPod since I cannot view the secure authentication code. I have reset the router to factory default. ipconfig command yields:Connection specific DNS suffix...domain.invalidIP Address...192.168.254.1Subnet Mask...255.255.255.0
l have a web-site and when l go on it it comes up with blank page internet explorer cant load this page.l have phone talk talk and they cant fix it.l have a d-link router,its only my own web-site l cant access all other web-sites l can access.
I did RECOVERY on my computer. Its a Compac Windows XP Home edition. This computer runs off of my main computer by a router & adapter. My router & adaptor are showing green but the Internet is showing red. Its becuz my high speed Internat service is ATT.my.yahoo.com. which comes through IE. On my newer computer all is fine. My IE works good & all is working. but my IE on my older one which runs with the router wont set up.
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
I want to block everyone from seeing each other on the LAN. So when someone goes to network neighborhood they can't see no one else on EXCEPT for the pritner or so. I want to do this using a Cisco 1841 router. How can I do this?
Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?
I dont mean a website like facebook.com, but i want it to block an individual page,such as a profile page, yet still be able to access the rest of the site? Again i'm not after facebook settings etc, but i want to restrict access to certain webpages within Lan.
i just want to ask how can i block all proxy server websites in my router( any brand ) so that no one can access, like facebook i already block it in the router but they still access using proxy server website.
I cannot open the config page of beetel adsl2 router using 192.168.1.1I have connected my laptop to router via Lan cable. Now when I give the ipconfig, I get some random IP and does not get the default gateway: Autoconfiguration IPv4 Address. . : 169.254.129.188 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :I cannot ping 192.168.1.1 nor 169.254.129.1 thus the web page of router cannot be opened.This all happened after I reset my router.
Signed onto pc as admin, logged into router with correct user name and password. No page in the browser based configuration displays the complete information for the page. Menus are missing as are option labels, etc. The last time I accessed the router (about a year ago) I didn't have this problem.
everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
I am using Chrome as my primary broswer, but recently I can't get access to a particular website, but while I use other browsers to access that site, it is perfectly fast and without any problems at all. I don't know if i have accidentally pressed any key or accepted any setting that has made google chrome to block access to that site.
I want to block 10.0.0.1 and 192.168.1.1 but my router says invalid domain so if will the guess network be able to go to page 10.0.0.1 and 192.168.1.1 even though I don't block it? I have a bypass account but don't want anyone else to access 10.0.0.1 and 192.168.1.1. Also can you tell me some proxy sites I can block?
We have blocked some sites in router which our user cannot access and it gets them default browser message "pages cannot be displayed". But I want to display pages like "You are trying to access unauthorized website" or something like that when they try to open such websites.
I have a 2800 router and tried so many ways to block the unwanted sites on my office network.Like access list ip based, null0 routing and policy map. Faced issues with below config
1. Creating Access-list. very difficulty to block the sites with https those sites will be opend, and we cant block all the IPs
2. Creating null0 routing. it also a bit deficult the block maximum sites because we can't fiend all IPs for those sites
3. Policy map.. with policy map we can only 1site we can block, but not more than one..
I heard that port based routing or port based access-list are the best ways to stop the websites in my local network..for this one i need to map the site to unsued ports then i need to null rouging or need to create the access-list.
In my office we have concrete walls and very limited wiring. The way it is set up is we have a Verizon DSL Modem that comes in then I have a router with it that splits the signal to 4 other routers that each split the signal 2 to 3 more times. I have to use routers so that it assigns IP addresses.I bought a new D-Line N300 Wireless router with USB imput. I want to attach my Home Media Network Hard Drive Cloud edition to the 1st router (attached to the modem) and then share the data off that hard drive with everyone connected to the sub routers.
How to block a specific website with a specific time (office hours) for example "facebook" I want to block facebook within 8AM - 12Noon then 12-1 they can access the website, then 1-4 block again the website .
I have an ARRIS modem supplied by Comcast cable. I have an hp pavilion x1958 and want to run internet service to a secondary computer from the same modem. And I don't have money to buy a router. How can I do this the cheapest way?
Currently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1
We have an ASA 5505 and I want to block www.facebook.com for all users on the inside network. I followed the instructions laid out in Cisco support document ID 100513 using regular expressions with MPF but am running into some problems.
Once the configuration has been changed based on these instruction www.facebook.com is blocked. However I can't access any other websites except my Google News home page comes up just fine for some reason.
The modem Time Warner gave me several years ago was dying, I took it in, they gave me a Cisco modem, I plugged it into the computer, works fine, so then I plugged it into my airlink 101 wireless router, the computer recognizes the router but says there is no internet access, i.e. the modem and router are not communicating. Why would change of modem cause lack of communication with the router, is there something different about modems now compared with roughly 5 years ago? And what can i do to fix it so i can have wireless access again? If it matters, I have no protection on my wireless (because I never figured out how).
I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?