Im using a wireless ADSL Modem and can connect/visit websites with web browsers.
But when i try to play/connect to an Online game (Age of Conan for example) or use a program that require an internet connection says im not connected or couldnt update the game/program
Due to the untimely demise of my old wireless adsl router (after an altercation with a destructive toddler), I've bought a new one.Connected it via cable to my laptop, & have set it all up through the wizard. When I'm connected via cable, I can access the internet perfectly well.However, if I try to connect using wireless, it can see the wireless router, asks for password, tells me I'm connected to the router - but it tells me that I'm in a local network only (can't find the internet). I've connected another laptop and a few smartphones to wireless, and they all work without any problem at all.I've done the usual take it all apart & start again, but it still comes back to the same problem.The only thing I wondered was that the new router is Wireless N, whereas the old laptop is a b/g - but we've got an older HTC smartphone that's only b/g and that doesn't have any problems.
View 13 Replies View RelatedI just moved into a new apartment and inherited a former roommates internet set up. Our router was infected with DNSchanger, so I sought to reset the router and update the firmware. I reset the router and it no longer recognized the internet connection. I can connect when plugged directly into the modem, but the router doesn't recognize the internet connection. Below is my ipconfig/all log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersREDACTED>ipconfig/all
[Code].....
When installing the DIR-615, router installs, but error msg that there is no internet connection. SmartConnect is plugged into the WAN and I have tried the ethernet cable to the computer in spots 1 & 2. Good connection when SmartConnect modem is connected to computer directly.615's Internet indicator will turn green for a while, usually less than a minute or two, then flashes, then may actually cause the routers status indicator to flash off, then back on. Like a reset.
View 2 Replies View RelatedI have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
The main computer received a virus and I had to reinstall the operating system. When I did, however, all settings disappeared. The lights on the modem and router are fine, and the secondary computer has full access to the Internet. I also can use my Wii with the Internet. I tried setting up the router again but the main computer won't load the web-based configuration utility page. The secondary computer, however, can. I tried plugging the modem directly into the computer but the computer didn't seem to recognize it either. I bought a new router, thinking if I got software it would automatically set everything. However, the router I received came with zero software. I plugged it in and the computer still couldn't connect to the config page. I am at a loss as what else to do here.
My old router is a Motorola WR850G and my new one is a Netgear WR614 v9. Either would be fine to use, as long as I can get both computers to connect. The host computer has XP and the secondary Vista.
I have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.
View 5 Replies View RelatedI recently had to reinstall XP and all the drivers for my friend's laptop but it seems it does not recognize any wireless connections. When I click the Choose a wireless network it says "No wireless networks were found in range" however I can use my laptop just fine.I clicked the network adapter and it says everything is running fine so I am not sure what the issue is. How to get the wireless internet working.
View 2 Replies View RelatedSo I recently got a new computer today and it won't let me use my 100mbps of internet bandwidth. (Asus Sabertooth Z77 with an Intel 82579v gigabit lan controller) I noticed that at the LAN connection properties>Properties>Configure>Link Speed tab the 'Speed and Duplex' option was on Auto Negotiation and it was only accepting (or supporting) the 10mbps Full Duplex. When I switched it to 100mbps Full Duplex it would mark my connection icon with a red cross and when I clicked diagnose it said "Please connect your ethernet cable or your cable might be broken". So I tested my internet speed with that same cable on a different computer (laptop) and it worked with 40Mbps, so I don't think the cable is broken. Also I just recently downloaded some drivers but one was specifically for the Intel LAN controller but I'm a total noob for all of this computer stuff I don't know if it messed it up or something. Is it the motherboard that's not working correctly?
View 3 Replies View RelatedI'm running Windows 7, and we have a dual-band router on 2.4ghz and 5.0ghz. My wireless LAN card is capable of picking up both frequencies, but will not even recognize the 5.0ghz connection, only the 2.4 one. I've checked all of the settings, "country codes", everything I can think of, but I can't seem to find a reason.
View 8 Replies View RelatedThe power went out in the room where my desktop and router and modem and everything is located. The electrical outlet that all of those things were connected to suddenly stopped working so I had to relocate everything to the other electrical outlet in the room. Everything is working fine again, including the internet connection on my desktop, but now my laptop in the other room will not recognize my wireless connection. It gives me a list of available networks, but none of which are my own. Which makes no sense, as everything is working as normal on my desktop. I tried to "manually connect to a wireless network" by typing in the name and proper security type/encryption type and password, however it tells me a network called (my network name) already exists, and it says "use the existing network. Open the 'connect to a network' dialog so I can connect." or "choose a different name." When I choose the former option, the list of available networks pops up again but mine is not on there. And it should be, as I'm definitely in close range of my router.
[code]....
I usually connect my PS3 to a switch which then goes to the BuT Home Hub and it works fine. However, I want to connect the PS3 directly to my Hub but when I plug it in to the Hub, it doesn't connect to the internet at all. Is there something I have to configure in order to get it to work?It is a PS3 160 GB Slim with Firmware 4.0.
View 2 Replies View RelatedDell pc studio 450s will not recognize network connection after power outage. Have run diagnostic fix multiple times but to avail. I have roadrunner cable broadband connected to voyage router and then to wireless router. Wireless router and vonage works (as evidenced by this email using iPad)
Have already reset everything multiple times including unplugging modem and pc.
From what I understand the pc is getting gatewayaddress or does not recognize.
I'm using sapo internet USB pay as you go internet,the only problem I cannot get my windows vista to get connected . the software downloaded perfectly it just cannot connect to network! the computer i'm using now is gonna disappear soon!
View 1 Replies View RelatedMy computer does not see the internet. If I do a restore to an earlier restore point, it can see the internet,, but when I do a restart it goes back to not allowing me to access it. The weather gadget cannot see the internet either. The OS is Win7 64.
View 1 Replies View RelatedRegion : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.
I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.
I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.
recently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies View RelatedI have a Dell desktop with Windows 7, a Dell laptop with Windows XP & a Toshiba Satellite laptop with Windows 7. I bought a new router for faster internet speed - Netgear N600. I now have internet on the two laptops, the Kindle Fire HD & my Iphone. I cannot access the internet on the desktop. It shows that I am connected to an unidentified network but I can't get online. The techs I talked to said it's a problem with my computer but I didn't have that problem before.
View 1 Replies View RelatedI am running windows xp sp2 on a pc, a wireless modem 2wire model 2701hg and a laptop with windows vista. My pc had a virus that required reinstalling windows xp. When I did that my pc came up with an ethernet connection instead of reconnecting into the wireless network. I cannot get the pc back into the wireless network with the limited knowledge I have. When I look at my "system summary" on the 2 wire website I can see my pc listed twice, once with the ethernet connection and once with the wireless connection but labeled "inactive". How do I get my pc back onto the wireless network?
View 12 Replies View RelatedI can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7
View 11 Replies View RelatedI have a toshiba satellite p25-s520 and running windows xp sp3 and I cant figure out how to get it to recognize a wifi setup?? I called toshiba and went through explaining and she said it was a configuration issue and she was going to put me through to her tech so he could fix this remotely and last minute she said i had to purchase a warranty, i said ill figure it out on my own,
View 5 Replies View RelatedI just got a laptop from my mom, and the dang thing doesn't recognize any networks!
View 5 Replies View RelatedI am able to use the lap top but not my desk PC.Browser keeps "failing" to recognize the DNS ? or my ports are blocked by a previous firewall ?
View 19 Replies View RelatedI just formatted my hard drive and now I cant connect to the Internet. I think it has something to do with the drivers for my network adapted.
View 2 Replies View RelatedI have an IBM R-40 thinkpad that I restored to original with the IBM icon and then updated it to a service pack 3 and updated anything that popped up. Now it doesn't recognize any wireless at all. I tried the FN,F5 still no luck. It has a INTEL card, Model WM3B2100 in it and it worked fine before the restore and update.
View 1 Replies View Relatedi have an ACS Appliance 5.x but the LMS 4.2 doesn't;t recognize it as Cisco device , and give him the sign ? how to make LMS 4.2 recognize it as acs
View 3 Replies View RelatedHave followed directions for changing password and retrieving password but get 'do not recognize username maryjaneohlson@gmail.com'n I am receiving email but can not send.
View 1 Replies View RelatedRouter will not recognize the printer
View 1 Replies View RelatedI have a Fujitsu Lifebook Series E that used to connect to the internet but will not connect now. It will not recognize or list any wireless connections available. Actually, I can't even pull up an empty list of wireless connections available. It does have a local area connection but it says a network cable is unplugged. I know it may be a faulty wireless card but I don't know how to test it or, if it is bad, where the find it to replace it.
View 14 Replies View RelatedI just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:
Windows IP Configuration
Host Name: bouss
Primary Dns Suffix:
Node Type: Broadcast
[Code]....
I have an old Compaq PC that's running Windows XP SP3 and for quite some time has not had problems with networking or using this wireless adapter. But not long ago the network interface disappeared and the adapter was now being shown in the Device Manager as an unknown device. If you pulled the adapter out and reinserted it you'd get a message on screen that would say something to that effect.
There are two computers next to each other that both use this exact same adapter and I've tried swapping them between the PCs to see if one adapter worked better than another. They both work in one PC and neither work in the PC I'm having trouble with.
my laptop doesnt seem to recognise any networks so I can't connect to my router
View 12 Replies View RelatedMy son is at college and his roommates can connect to wireless, but his computer does not recognize a network. It says the settings saved on the computer do not match the requirements of the network
View 1 Replies View Related