Speed Drops When Using Router?
Feb 23, 2011
i recently upgraded my road runner cable from 1.5Mbps to 10Mbps.I checked my speed on speedtest.net and my speed was an astonishing 20Mbps.the problem occurred when i hooked up my linksys 4 port model nr041 router so my bro can also use his laptop. i checked on speedtest.net with the router hooked up, without us using anything, and the speed dropped to 6-10Mbps. I don't know why the speed dropped so much. We weren't messing around with anything and wasn't using the internet.About 3 hours later after my bro was done using the laptop I disconnected the router and plugged the modem straight into my pc and the speed shot back up to 20Mbps on speedtest.net.
View 14 Replies
ADVERTISEMENT
Dec 27, 2011
[code] My connection is ADSL with 2Mbps broadband. Using speedtest.net for testing the speed I got almost 2Mbps, that is ok, but this is connected directly to the modem. The problem is when I use the router, when I connect it the speed downs onward until it achieve a stable value of 512kbps, that is 4 times less than my contracted speed. I have tried with four different D-Link routers (DIR-280, DIR-600, DIR-600 N150, DIR-615), four ones give the same problem.D-Link tech support people don't have idea about what is happening just like tech support people from my Internet provider. I think the problem is not the modem because I get 2Mbps from it connected directly (without the router).I do the speed test in an interval of 3 minutes between each test, with just one device connected and only doing the speed test, all programs that use Internet access are closed.
Always is the same, after a time the speed drops down, from 2Mbps until 512kbps. The router has the QoS disabled, I have tried changing the MTU value, I have tried some values 1492 (this is the official from the Internet provider), also I have tried some lower numbers 1400, 1200 but the result is the same. The router has as security only wpa2 and it has a static public IP, the modem is configured as bridge. I have also tried unplugging the phones, connected to the splitter, keeping away the wireless phones, moving away the router from the modem for electronic interference, modifying the WAN speed from auto to 10 and 100, I have disabled the firewall, change the channels and power TX. I do the speed tests using the wireless and wired interfaces.
View 3 Replies
View Related
Jul 23, 2009
I have had the DIR-825 since the beginning of the year connected to AT&T DSL Internet 3GB. I just upgraded to their 6GB download speed and didn't see any change in speed and suddenly I couldn't view my SlingBox anymore outside the house. I connected one computer directly to the modem, ran the AT&T speed test and got >5GB download and @700 upload. Wired via 1GB network back to the router, ran the speed test and it dropped to @4GB download and 120 upload.
I called AT&T, they checked everything, and said there was nothing wrong. I then spent almost an hour on the phone with D-Link including getting passed to 3rd level support. I knew something was wrong when the guy told me that since it was only a 1GB router, I shouldn't expect to get faster than 1GB Internet download.
The router is still running the 1.00 firmware and these are the changes they made me try so it's still sitting at these settings:
- Change the WAN from Auto 10/100 to 100 only.
- Change MTU to 1482 in my PPPoE settings
- Change Firewall Settings to turn SPI off. He said the router is still providing a firewall though.
He wanted me to download the 1.01 firmware but I balked and he said it probably wouldn't do any good. It ended with him wanting me to call AT&T back and set the modem to bridge mode. I then need to call them back and set the PPPoE again. This 3rd level support guy was very rude and am hoping to avoid calling them again.
Before I go through the hassle of calling AT&T and trying this bridge mode, or has the Elite 6GB service from AT&T and are having it work correctly.
View 15 Replies
View Related
Oct 25, 2007
Networking isn't my strongest computer subject area, but I know I'm having a performance problem with my RV082 router. When I direct connect my PC to my cable modem, I can get very near the 7mb/sec rate advertised by my ISP. When I connect the modem to this router, then connect to the pc to the router, the speed drops to between 2-3mb/sec. All tests performed several time using dslreport.com speed test website. The result is very repeatable, so I figure it has to be some delay introduced by the router. I can't see to find any place in the router configuration to do performance tuning. I'm not using any firewall rules except for the default rules. Why I'm seeing a greater than 50% decrease in internet throughput using this router?
View 8 Replies
View Related
Jul 17, 2012
We recently purchased a Linksys E3200 router, because our old router didn't take advantage of our internet speed. The router works fine, though the internet speeds again isn't as much as expected.
With a wired connection, we only get 80 Mbit/s of our full 120 Mbit/s, according to Speedtest.net. The Cisco Connect built-in speed test is even worse; only 40 Mbit/s. When we directly plug the computer into the modem, we get the full 120 Mbit/s, which indicates that the modem does have the connection speed. The router just doesn't give it to the computers attached.
I don't know about my wireless speed, as my wireless card in the laptop clearly is the bottleneck (it can only connect at 65 Mbit/s). Atheros AR9285 ftw.
We tried different cables, the one included with the router gives the same speed.
View 9 Replies
View Related
Mar 7, 2012
Got a Linksys E3200, and a gigabit card, even two, Realtec and Intel, have a connection ggbit. If the power cord plug directly into netcard, all at great, the tracker up to 80 MB per second, shakes on speedtest.net, shows 780 240 + Mbps. When i connect my inet through the router, the speed drops to 12 MB(100 Mbit) and speedtest the same, but in the the web interface in the statistics shows that everything is connected to a gigabit.
Plus, when I ping my ISP's website (ip -t ) and assume [URL] click on the test, the router with 1ms pings are beginning to rise to 30 ms, and when it is directly in netcard, it stable 1ms.... When through the router, torrent shake it just do up to 100ms jumps. I have all the settings , and set up his hands, and a manager, all for nothing. It started five days ago, before that everything was ok. Can a router burn? Rather it gigabit controller?
View 4 Replies
View Related
Apr 26, 2012
My ISP provides me internet by pppoe connection.When testing the connection with the router i get 30 mbps.When testing the conection without the router, cable conected to laptop i get 60 mpbs.
View 1 Replies
View Related
Aug 11, 2011
I purchased a new router - cisco e1000. Currently, i have 2 laptops wirelessly connected to this router. When i do a broadband speed test, the speed drops down significantly to 8MBPS while if i connect it to the cable modem directly (wired) i.e., without router, i'm getting 15 MBPS download speed. I did a couple of times this speed check and the results are same. I tried changing the advanced settings in the router (which was specified in one of the post in this forum) but no luck. Is it that i need to buy e4200 to match the wired speed of 15 MBPS or what other things I can do to get the same speed of my cable modem (provided by my ISP)?
View 1 Replies
View Related
Nov 5, 2012
I'm running a Cisco E4200V2 router with the latest firmware (2.1.4.12284) on an iMac running OS X 10.8. My ISP is providing 15Mbps to my modem, which I've confirmed by connecting directly to it without the router. Once I put the router back in the path, my broadband speed drops to about 6 Mbps. Is this the best I can expect from this router?
View 2 Replies
View Related
Dec 21, 2011
I have four E4200's doing the same. I have FiOS 15M download and 5M upload. As soon as QoS is turned on the upload speed drops down to usually 300k and it never exceeds 1M.At the same time any VPN connection gets dropped often.I also configured one E4200v1 as router and the second E4200v1 as Access Point (HDCP off) hardwired to the first one.Any VPN connection gets dropped when changing location. I.e. if VPN was established with the router, the connection gets dropped when in the location where AP is -- and the other way around too. There is no coverage gap between the two locations, to the contrary - they do overlap heavily.On Dec 21, 2011 the level 2 Linksys/Cisco people advised that they will forward the two issues to engineering and that resolution will be within 24-48 hours.
View 5 Replies
View Related
Apr 16, 2012
My problem occurs when i am trying to download something big, mainly the speed of the download raises at a peak and then it drops disconnecting me from the internet for a few seconds. This only happens when my laptop is on a wireless connection and this phenomenon repeats itself untill the download is complete. During the connection crash I am not able to access any site.
My laptop is an Asus G series with Win7 64bit SP1, and I use utorrent for P2P downloads.
View 1 Replies
View Related
Jun 24, 2011
I have two computers, both of them running Windows 7. One of them has been experiencing an odd problem for about six months now, and now that school is out I have time to mess with it. When I try to do certain things, the download speed periodically drops to zero. Specifically, I've noticed it when using Firefox and Steam, but also for IE and a few other browsers I installed for the sake of testing. I know I'm not *losing* connectivity, because everything that isn't specifically downloading a file works fine. Skype calls work fine, Utorrent streams at a steady rate, but for some reason Steam and Firefox have speed graphs that look like the heart rate monitor of someone with a very weak pulse. It starts off strong, a nice solid 1 MB per second, and then after 10-30 seconds it'll slowly decline to 0, and sit there for anywhere from 10 seconds to half an hour before picking up to full speed again. I've tried reinstalling drivers, I've tried buying a new network card, I've tried running antivirus scans, and I've tried uninstalling my antiviruses. The only thing that works for sure is putting it into safe mode. In safe mode, the downloads proceed smoothly. I tried making a list of everything that ran in safe mode, and then rebooted into normal mode and closed each nonessential process and service, but that didn't work either.
View 7 Replies
View Related
Aug 1, 2012
I have tested internet speed on Ethernet (~20 Mbps), but when I'm connected via wifi network, it drops down to ~11 ? The speed is same on all wireless devices even when I sitting next to the wifi router.
View 8 Replies
View Related
Mar 31, 2011
so upstairs is where my 2wire router is, with a steady 54 mbps signal speed and a excellent signal strength for any computer upstairs, BUT any computer downstairs will have the signal strength goes from 1 through 24 mbps alot.Now, I do have other computers connected to the router, none are taking up the speed, and all have the same signal strength. All of these computers are upstairs as well.I know for a fact it isn't the computer, since when my computer was upstairs it would work fine, but with everything exactly the same it'll be horrible downstairs.Only things I have thought of might be interference... but have zero idea how to find what would be causing the interference if any exist.
View 3 Replies
View Related
Feb 8, 2012
Network connection speeds drops from 1 Gb/s down to 10 Mb/s..Tried forcing the PC to communicate at 1 Gb/S "Link Speed & Duplex".Tried reinstalling drivers
View 2 Replies
View Related
Jan 16, 2011
As soon as I add the interfaces of the router to security zones it significantly drops speed on WAN interface, below 1 Mbs. I noted this because I wasn't able to watch youtube. Moreover the bandwidth test from speedtest.net hangs and doesn't come to a result. Here below is the diagnostic example while doing that test. The question is what is going on? I have two iPhones and three computers in my network, that's it. My ISP bandwidth is 10 Mbs, so is this the router hardware limitations, or kind of malfunction or some misconfiguration down here? What could be done here ?
View 4 Replies
View Related
Feb 20, 2013
I have a issue, my DIR-615 V.E3 has been working good. I have multiple computers connected and all get between 280 and 300Mbps. But then after a few hours the speeds drop to 130Mbps on all computers. After I reset the router the speed returns to 300Mbps. I have it set up to run on N speed only so g devices are not connecting.
View 14 Replies
View Related
Jul 24, 2012
I got my Brand new xps 15 yesterday, It works fine, looks great, I'm overall satisfied with it. (even though it gets warm all the time)
Problem is, the WIFI doesn't work well at all, I'm 2 meters from my box right now, And I'm not experiencing any problems, but as soon as I get upstairs in my bedroom, my signal speed drops significantly, I can't even load a you tube video, I was downloading a game from steam yesterday, and the dl speed dropped to 6mb/s!! That's awful, If this problem can't be fixed, I'll be returning mine, and won't buy any other Dell product, I don't see how a laptop that pricey can have that kind of problems. ( because I heard I wasn't the only one, a lot of people have the same problem).
View 384 Replies
View Related
Aug 2, 2012
I am having an issue with my network connection. I have tested the connection itself and it's not a problem on my ISP's end or the connection itself, but seems to be caused by hardware/software errors originating from the computer. It almost appears as if the connection is being capped or the like, because the signal is very strong when I connect to the internet at first, then after a few moments drops (consistently every time I try reconnecting) to an unacceptably low signal level.
View 14 Replies
View Related
Aug 10, 2012
I am using linksys cisco wag120n adsl2 modem router.When I start the router the internet speed seems great but after some time the speed drops miserably. When I again restart the router the speed seems great for few mins but again drops after sometime.It happens in both LAN and wireless mode.The firmware version of the router is 1.00.16
I was going through the problems posted by some other user but observed that cisco people are not heraing to them.Seems made a mistake by associating with cisco product.This is the worst router I have ever used.The wireless also gets disconnected abruptly.Next time I'll avoid cisco.Cisco is all about stone age products and zero customer care.
View 1 Replies
View Related
Jun 22, 2012
I have a Linksys E1000 running on the latest firmware available from the Cisco website. When my main PC (Windows 7 64Bit SP1) which is connected with a ethernet cable is running the wireless speed is great for all my connected devices. (Android/Apple phones, tablets, family PC, etc). But when I shut down my main PC the wireless speed drops to the point where it can take 3-5 mins for google.com to load up. The wireless connection is still showing as strong, just the speed isn't there anymore. If I were to turn my PC back on, everything will load up almost instantly and be back to normal. I've tried reinstalling the router, resetting it all back to default settings and re configuring it but I've had no luck in solving this.
View 2 Replies
View Related
Jan 24, 2013
When enabling the WAN Traffic Meter on my RV180 with firmware 1.0.1.9, my download speed drops to half of my capacity.WAN Traffic Meter disabled: download around 13 MB/sec, WAN Traffic Meter enabled: max 6 MB/sec.WAN QoS is disabled!
View 1 Replies
View Related
Dec 28, 2010
I just discovered that my wireless download speeds are 5Mbps, compared to 16Mbps if my laptop is connected directly to the modem or wired through the router. Uploads are 2Mbps either way. I have a WRT54GS v.6 with firmware version v1.52.8 which I updated today, completed by setting factory default through the router webpage after I discovered this discrepancy. The firmware update did not improve the download speed appreciably, if at all.Should the wireless connection be that much slower than the wired connection through the router? If not, what sort of issues could I be having to account for this?
I did just replace my modem when I discovered I was having erratic speedtests and that corrected that problem. That is when I became aware of the wireless issue, so not sure how long that has been the case. I have Charter's 16/2 HSI, living in a sparsely populated area with solid internet service. There is no external nor internal interference on this 2.4Ghz band.
View 8 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Jan 13, 2012
Often my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.
View 6 Replies
View Related
Apr 5, 2013
My router drops my internet connection at least once a day. When the router does this, my wireless network connection disappears from the network list. I have to disconnect router from plug and plug it back in to work again. If I hard-wire laptop to router or modem, I still do not get internet unless I unplug and re-plug router.
View 9 Replies
View Related
Apr 9, 2013
This issue has been going on for a few weeks now, i will be using the internet and it will suddenly drop out. My computer is connected to my router, this connection is fine it is just the INTERNET connection that drops out. When this happens all of the computers on the network are affected.
View 12 Replies
View Related
Apr 15, 2011
My internet will drop permently if i connect my router ot my modem. I have purchased a wireless router and intended to use it with my Iphone and when firends come over with laptops they could use it as well. Because i live on 3 and a half acres i don't need to protect it well it doesn't bother me. For a couple of days it was working fine until i was playing a game and my internet just dropped and i investigated the issue and found when i unplug the router which is connect to my modems first slot (Ethernet cable) the internet will come back on but when i put the cord back in my net drops. ive tried changing the slots and trying different cables.
View 3 Replies
View Related
Apr 13, 2012
I have a DIR-601 and the wireless part of the router as far as i can tell, it drops for about a minute and then reconnects on its own, any thoughts? This i getting rather frustrating because it also does with my previous router. I have changed all the wires included the cable from the wall to the main cable box.
View 10 Replies
View Related
Jan 12, 2013
What s the fabric speed (backplane speed) of a Nexus 2232 10G EX?What is the forwarding rate (Mpps) of the same 2232 FEX?
View 6 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
Mar 9, 2012
I am using Linksys wirelless G router, will my wired speed on desktop increase when I change to a wirelless N router for laptop and ethernet for wired desk top? I don't need anymore wireless speed but am wondering if I upgrade will my wired desktop pick up more speed.
View 2 Replies
View Related
Jan 24, 2013
On board NIC: Intel 82579V Gigabit Network Controller (asus sabertooth x79 motherboard)I installed the drivers for it from intel's site.f I set link speed to auto (chooses 100mbps full duplex) or 100mbps full or half duplex, any HTTP downloads get slowed to a crawl (30kbps) (steam downloads remain at normal speeds). If I set it to 10mbps full duplex, download speeds jump to normal (500kbps for most HTTP sources)his happens on just this new computer (wired connection), any other computers on the network (wireless) work just fine
View 8 Replies
View Related
