I tried to open my tumblr account and couldn't access it, as it said 'not found' even though i havent changed my link.so i tried to open the normal tumblr site, which is www.tumblr.com, hoping that my blog would open if i logged in again.i tried to log in, and this is the msg that comes -
[url]....
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : DEMON
I'm using parental controls to block all devices in the house from using tumblr. I cannot do this at a device by device level as it is being used on iphones/androids, laptops and desktops.Unfortunately, the way that tumblr works is that it use many URLs for the different pages people set up so it is not just a case of blocking url... - so I'm struggling to work out if I can do this via URL blocking on the router settings. How to do this at router level.
it says no network found. It worked fine but not now.
View 1 Replies View Relatedif no route is found to the destination in wireless networks what will happen to the data packets that are being transfered. will tey be lost or ll be queued in the intermediate nodes.
View 3 Replies View RelatedI ran an error fix on AVG and the AVG one time tune up and not my HP Mini cannot connect to the internet. WLAN is on. It says "No wireless networks were found in range"...when it was just connected before I ran AVG program and has been for monthsWhen I try auto repair it does not find network. When I open Network Connections it says Wireless network Connection 2 Not connected, Firewalled Broadcom 802.11b/g WLAN
View 13 Replies View RelatedFor the past week I've had a problem browsing the internet. Now, at first, this only happened starting at around 3 am central time and ending at about 6 am when I could browse the internet properly. As the days went forth, however, it began happening earlier at around 12 am. What would happen is this: would be on the internet browsing sites and whatnot. All of a sudden (As I'm loading a new page) I would get the "Address not found" error as if I'm not connected to the internet. I could try to reload any other page on my session,but sometimes it would halfway load (ei:not loading pictures, ect.) and other times I would get Address not found. This would go for about a 4 hour time period. After that, everything would be back to normal and I could go back on my session.
Now, I'm on my laptop via a router that is in my house. We also have a desktop computer, but I noticed this problem happening on my laptop first. When it first happened, it was only on my laptop. I had internet connection and could browse it endlessly on my desktop. As the days went on, however, my desktop started having the same problem connecting to the internet (I still noticed the problem on my laptop first and then I would go see if the desktop had it too).When this first happened, I was thinking my laptop wasn't connecting to my router. Instinctively, I reset the router to no avail. I also opened up IE (I don't use it much because it's just too slow) and tried to diagnose the problem using that. When I did this, it was giving me DNS as the problem of me not connecting to the internet. I am not a network admin so I don't know that much about DNS. I also used IE to diagnose the problem on the following days, but after the first time it only gave me a "You aren't connected to the internet" solution. Since then, I've been running a barrage of anti virus, rootkit, ect. just because I can and I haven't done it in a long time. I didn't find anything unusual in all the reports so I'm still not sure what the problem is.
i cannot find any connections!! i can with a eithernet cable but i want wireless!
heres my cmd wthout the eithernet cable
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersStewart>ipconfig /all
[Code].....
I just downgraded from vista to XP on my Compaq pc that a friend gave to me. The hard drives were loaded with junk so i decided to do a fresh install with my Windows XP cd. Everything looks like its working great except it seems as if ive lost all drivers necessary to connect to the internet. Pretty much the computer can't even tell that theres a network adapter installed.
View 10 Replies View RelatedI'm still having problems (as seen in 'Network Controller Not Found (Clueless!)) and have a quick query.I'm trying to locate a specific driver and so far have exhausted my search, can I get anything from the Hardware Id from the Unknown Network Controller?
View 3 Replies View Relatednetworking path are not found what can i do
View 3 Replies View Relatedi want to setup mu outlook but my sent items is not sending pop up keeps on saying my outgoing server is not found .
View 1 Replies View RelatedMy desktop cannot go online suddenly and I reformat my desktop with Windows 7. There's nothing under the network adapter section. My house has wifi router and other laptops can connect to the wifi but my desktop (connect to the modem using cable), cannot.When I tried to run the troubleshoot, it says, it cannot find the network adapter and I have no idea which adapter I'm using.
View 1 Replies View RelatedI hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 Replies View RelatedWell, I have a problem with my router, I just did a fresh install of WinXP Home Edition but my wired router wont come threw, I looked at my connections and there isn't a Local Area Connection. I had this problem with my other XP computer, but it fixed after a driver scan and fix by Driver Robot. But that was when I could get online with wireless. My wireless connection capabilities broke after 4+ years of running. I ran a offline mode of Driver Robot,
View 6 Replies View RelatedI have just got a PS3 and want to use my PC as a Media Server for it. The PC is in a different room. I have hooked up a 2TB external hard disk to it. The PC and PS3 are visible on the same network. PS3 wirelessly, and the PC wired. Both use the internet ok. I want to play a film or music file from my PC, from my PS3, and onto my TV, but whenever I look for Media Servers on the PS3, they come up 'no media servers found'...
View 1 Replies View Relatedjust noticed today, that there's a FW ver.4.13 for Rev.D, which I uploaded into the router too. Captcha is now gone (I read it was flawed anyway), and no option to turn it back on (I'd do anyway).So I'm looking for the older firmware that I was using for a year or so, which was 4.11. I found it and downgraded to it (actually, this was on another DIR615 rev.D), and guess what? No catpcha in that either!As far as I remember, I was using 4.11-B04 (but not sure, really), whatever it means, and now I only find 4.11-B02 everywhere.Is it possible that those FWs with buggy captcha have been removed from FTP servers worldwide?
View 5 Replies View RelatedI am trying to install the WLAN driver for Dell Dimension 9200C desktop computer running Windows XP but I keep getting the error that no compatible hardware was found. I've gone to the appropriate Dell Drivers site for the computer's model and I'm 99% sure I downloaded the correct software for WLAN: Dell Wireless 1395 WLAN MiniCard. After going to Device Manager and looking under "Network Adapters", there is no Dell WLAN card at all (direct ethernet connection for internet works). Is it possible that the computer cannot find the WLAN network card, which prevents me from installing the driver software, even though it exists? If so, what can I do? If not, I guess I'll go buy a USB network adapter.
View 2 Replies View RelatedI am having a major issue trying to connect my Windows 7 HP Netbook to my Xbox 360 over either Twonky/Serviio or Windows Media Centre. The Xbox just isn't picking up my computer, my homegroup recognises the Xbox and it is 'Allowed' to share media, but when I test my PC connection within the Xbox dashboard, it fails to connect to PC. My network is wireless.The strange thing is I have TwonkyServer Mobile running on my Android phone and that was found by my Xbox immediately with no need to change settings or search for devices. It streams media just fine from my phone. This leaves me thinking that it is an issue with my PC as opposed to my router, I have double checked my router settings (Sagem 2304), UPnP is showing as enabled, I've reset and unchecked/rechecked the UPnP but still not working.
My TwonkyMobileServer is also unable to find my PC server although I have been able to find my MobileServer in Windows Media Player and stream media from my phone.Windows Firewall has been disabled, I've also Uninstalled my antivirus software, Avast and AVG, although AVG doesn't seem to want to disappear that easily and is still lurking in my System Tray telling me i've 'Lost protection'...Norton Internet Security is also lurking around which is odd, I can not recall installing it! It doesn't seem to be a fully installed version and doesn't seem to want to be uninstalled. Could these AV software and supposed Internet Security software be holding me back?This leaves me thinking that my PC is holding back my Network. Is there any thing I haven't thought of? Would it be the Anti-virus leftovers ruining my streaming dreams??
i jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?
View 1 Replies View RelatedI've got a Philips MT1800, Intel Core 2 Duo package. My network adapters are recognised (1394 Net Adapter, Intel Pro/1000 PM Network Connection), but in unknown Devices the 'Network Controller' drivers are not found (there was a Ralink RT2500 slot before, I'm assuming this is the missing driver??). EVEREST Home Edition recognises a Ralink RT2500 802.11g Wireless Network Adapter (PCI), and my PC finds new hardware on reboot, but it cannot find drivers at all. I've tried a few methods, such as Driver Detective etc. but don't have the original restore CD any more, so don't want to tamper with any other "out of date" drivers. I am not in a situation where I can order a restore CD, so I'm hesitant to System Restore in case something else becomes unresolvable.
View 11 Replies View RelatedIt says i have excellent signal & other devices are connected, but laptop, Dell windows 7 , says server not found.
View 1 Replies View RelatedBasically my laptop was connected to the Internet fine and has been for as long as I can remember but today it just suddenly stopped working and when I clicked on 'View available networks' it gave me the message 'No wireless networks were found in range. Make sure the wireless switch on your computer is on. To see an updates list, click "Refresh network list."'. The strange thing is that I'm connected to the wireless network on my phone so it must be in range.I'm using a Samsung laptop (Not sure of the model) that is running on windows xp.It doesn't have wireless connectivity built in so I am connected to the wireless using an 802.11 USB Wireless LAN Card network adaptor that is made by Ralink Technology, which is working properly according to the device status.
View 4 Replies View Relatedi have a laptop running Vista which will connect to wireless network, but will not connect to internet. I have tried connecting direct to router and also deleting wireless connection & reinstalling with no luck. I can however use a mobile broadband usb dongle and connect to the internet with no problem - appears to be a problem with connecting via something other than mobile broadband?
View 1 Replies View RelatedAll of a sudden, my ethernet port isn't being recognized. It doesn't show up in device manager, and i get an error: "The Realtek Network Controller was not found. if deep sleep mode is enabled please plug the cable" when attempting to install the driver for it. i'm using the ethernet port on my gigabyte h67m-ud2h-b3 motherboard and i got the drivers from gigabyte. its as if i don't have an ethernet port it was working a few days ago but now, nada
View 2 Replies View RelatedI just installed a PCI Wireless Lan Card. I selected my network, and the computer says I am connected, but when I attempt to go to facebook via firefox, or go to runescape via its application, the page comes up server not found
View 1 Replies View Relatedi have 9 pcs on a lan. when i attempt to view the workgrp i get a message that indicates the the workgrp is not accessible and network path not found. i have tuned off windows and mcafee firewalls so that the only firewall functioning is with the modem/router(netopia) if i change the workgrp to the default(mshome) i can see the pcs.
View 2 Replies View RelatedI tried to forward a new port on my Actiontec V1000H router. I was able to sign in without incident, but the moment I tried to begin navigating within pages, I would be greeted with a red screen reading '400 Bad Request - No request found' roughly 60% of the time. Usually refreshing the page a number of times would allow me to proceed, but because the Telus software for the V1000H cycles through so many pages when applying a new forwarded port to the firewall, it's almost statistically impossible to make it through.I have no issues with internet connectivity, and having this port forwarded isn't critical, but this problem is a real nuisance as it turns changing any router settings into a long, tedious, and sometimes downright impossible chore.
View 5 Replies View RelatedEverything was working fine, I was able to make everything work fine. Then yesterday morning I started up my computer and it was not connected to the internet. My ethernet was plugged in and everything was as it should be. I went in to device manager and noticed that my realtek network controller was not in the device list under network adapters. I then tried to reinstall my LAN drivers from ASUS (my motherboard) which is how I got it to work in the first place. However, this time when it "finishes" installing an error pops up and says "The realtek Network Controller was not found. If deep sleep mode is enabled Please plug the cable."
View 14 Replies View RelatedMy computer started shutting off and not turning on. I had installed new parts a while ago and so I switched the new parts with the old ones (power supply and Graphics card) and it worked again. But i couldnt connect to the internet and i did a diagnoses and it said adapter not found or correctly installed or something like that. I couldnt find the adapter either. I was going to download the network adapter driver from the dell website on to a thumb drive and install in onto my desktop but i do not know which one to download.
View 1 Replies View RelatedI've been trying to connect to a particular website for a couple of days now, but always get "Server not found" error messages in Firefox. I have tried connecting on IE and Chrome as well, along with the 2nd computer on my wireless network. No luck there either though. I have been able to connect to any other website just fine. Between the two PCs on my network, I'm running Windows 7 and Windows XP.The website in question is currently up and they have said that no issues have been detected on their end and that it might be a DNS problem on my end.
View 4 Replies View RelatedI am not able to use bluetooth on my laptop. I am using windows7. After installing the bluetooth software, whenever i am trying to access i am getting error as "Bluetooth radio device not found"
View 1 Replies View RelatedI have a compaq presario V5000 with Broadcom 802.11b/g WLAN installed. I recently tried to set up Wireless connection and "No Wireless Networks are available". My roommate has no problem connecting to the Wireless Network so I don't think its a problem with the router/modem. Also, I am unable to detect ANY networks (neighbors etc.).I have installed most recent driver (Driver 5.60.350.6)
View 8 Replies View RelatedNew computer (Win7 desktop), works OK. Router is Linksys 310N. But, there are constant problems with "invalid URL" message. I was told a while back to hard code my DNS settings into the connection. That seemed OK, but last night, again got "invalid URL message" so I went back to getting DNS servers automatically. (what prompted the change was that I couldn't get to washingtpost.com). So, today I'm on NYTimes.com and everything is OK but when I try to access two pages (Op-Ed) I get "file not found". (IT was originally two pages and now it's many more.) I've had people look at the output from IPCONFIG /ALL; but any pointers, tips, etc. This seems limited to my desktop computer; the laptop on the same router is OK (also Win7).
View 11 Replies View Related