Outgoing Server Is Not Found?
Dec 15, 2012i want to setup mu outlook but my sent items is not sending pop up keeps on saying my outgoing server is not found .
View 1 Replies
ADVERTISEMENT
Get Outgoing E-mails To Be Registered On Outlook Server?
Mar 19, 2013how I could possibly get all my e-mails of which I send my clients through my outlook to be registered on my Home-outlook, Office-Outlook and my mobile-outlook? like on the server? something similar to when you open yahoo or G-mail from any given location you can view your sent Items,inbox etc.
View 4 Replies View RelatedWNDR3700 Outgoing Email Server Rejecting Messages
May 7, 2013One of my customers uses Comcast email and all of a sudden couldn't send messages the other day, telling me it was giving her an error. She said that she reset her router, and the email started working again.When I finally got over there to check it out, the email had started experiencing problems again. The error she was having was Error 550: Message Rejected (when trying to send email). There didn't appear to be any issues with her internet connection, and she wasn't having issues connecting to the email server, it was simply rejecting her messages.
I told her that she would have to contact Comcast, as there was really nothing I could do to fix their email server returning an error. She wasn't too happy, and remained convinced that her router had something to do with it. It's a Netgear WNDR3700 or WNDR3800 that I setup for her last year, it's a fine router.Has anyone ever had a Comcast email server randomly start rejecting messages? I noticed that her outgoing email was set to use port 587 which seems like a nonstandard port and also no authentication, but I have no idea what the Comcast email settings are supposed to be.
WRV54G - Server Cannot Send Outgoing Traffic Through Network
Dec 30, 2011I cannot get my server to send outgoing traffic through my network. I.e. If i try to connect to any of my services i get a very weak connection. Now, i can still CONNECT, i just don't get any data flow. I cant even PING the server internally, it just times out. Now, regardless of whether i use my internal IP/external domain, i get the same issue. I logged onto my computer and tried a speed test the download was normal (around ~20mbit) but the upload times out.
Here is the fun part, if i connect to the server using a switch, everything works fine! Is it my router or some stupid configuration issue? Router is a WRV54G (I hate this thing). Server is running windows 2008 and has a virtual machine.
Cisco WAN :: 8080 / Destination NAT To Redirect Outgoing HTTPS Traffic To A Local Server
Jul 14, 2011I have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443
Dell Windows 7 Says Server Not Found
Mar 17, 2013It says i have excellent signal & other devices are connected, but laptop, Dell windows 7 , says server not found.
View 1 Replies View RelatedPci Wireless Card Server Not Found
Jun 21, 2011I just installed a PCI Wireless Lan Card. I selected my network, and the computer says I am connected, but when I attempt to go to facebook via firefox, or go to runescape via its application, the page comes up server not found
View 1 Replies View RelatedCannot Connect To One Website / Server Not Found
Sep 22, 2011I've been trying to connect to a particular website for a couple of days now, but always get "Server not found" error messages in Firefox. I have tried connecting on IE and Chrome as well, along with the 2nd computer on my wireless network. No luck there either though. I have been able to connect to any other website just fine. Between the two PCs on my network, I'm running Windows 7 and Windows XP.The website in question is currently up and they have said that no issues have been detected on their end and that it might be a DNS problem on my end.
View 4 Replies View RelatedServer At Google Can't Be Found Because DNS Look-up Failed
Nov 17, 2012My wireless internet at uni is showing up with two errors, when its connected it will come up saying that there is an ip address conflict then it will work for a short time then show this message when I try to load a webpage:The server at Google can't be found because the DNS look-up failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing*Google Chrome*from accessing the network.
View 13 Replies View RelatedInternet Disconnected Server Not Found
May 10, 2012I having problems to conect to the internet after i install my graphics card.. is a asus radeon hd 5670 512mb all the services are on and the dsl cable is conected properly after that a buy a usb network adapter of 300mbps.i install it detects the modems i enter the securyty key properly 3 minutes later of scanning says that failed to conect t wire456 [name of the modem] the computer uses windows xp service pack 3 when i try it on my windows7 ultimate pc it works all ok i remember that later when i install the video card i uninstall some programs maybe i uninstalll some of the drivers but i dont now wich drivers.
View 3 Replies View RelatedCan't Access Google Sites - Server Not Found
Jun 10, 2011Everytime i try to go to a site that uses a google server, i get the message "The server at www.google.com can't be found, because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network."
View 2 Replies View RelatedPing Could Not Find Host / DNS And Key-port / Server Not Found
Apr 30, 2011recently I had some malware on my Windows XP Professional (version 2002), so I followed a guide at Bleeping Computer [URL] to get rid of it. Problem is, for some reason, after I finished, I could no longer access the internet!When I try, FIrefox gives me their "could not connect" message: "Server not found. Firefox can't find the server at [site]." Check the address for typing errors such as ww.example.com instead of [URL]"When I try to log into MSN, the troubleshoot says I have a problem with my DNS and Key Ports.I'm not good with computers so I Google'd and found some ping-ing instructions. When I tried to ping [site], I get: "Ping request could not find host [site]. check the name and try again." This happens regardless of the site I use.Lastly, I tried "ping 127.0.0.1" from a troubleshooting site. It gives me: "Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
[code]..
Sharing :: Unable To Access Shared Files On Server - Network Path Not Found
Sep 20, 2011Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
Cisco AAA/Identity/Nac :: 3750 Fall Back To Local Vlan If Radius Server Is Found
Nov 14, 2012We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image 12.2(55)SE6 having following configuration.We do not know whether we configured switch in proper way or do we need to modify it. [code]
View 5 Replies View RelatedCisco Firewall :: ASA 8.3 Outgoing NAT Not Working Right
Jul 11, 2011We recently upgraded our ASA to 8.3, most everything went ok, but I am having problems with outgoing nat. It seems that when one our systems that needs to be natted to an outside IP address when connecting out is not doing it. When that system goes out the ip address is our internet IP and not the natted address, however, inbound everything works.
We have one rule that does PAT
nat (INSIDE,OUTSIDE) source dynamic OG_IP_NAT_DMZ obj-1.1.1.1This is the natting statement that should be translating the addressesobject network obj-10.200.0.10
nat (INSIDE,OUTSIDE) static 2.2.2.2I think I need to double nat, is that right if so how?
D-Link DIR-655 Blocking Port 69 Outgoing
Jan 12, 2012within ACS 5.3, I'd like to use 2 external authenticator for the same service, like vpn remote-access.For the authentication, I know I can create an identity chain, to query SecurID and then AD, in case of user not found in SecurID.For the authorization rules, I need to provider a wide vèn access for SecurID users and narrow vpn access for AD user.Are there some parameter to use in compound conditions for SecurID ?
View 1 Replies View RelatedCisco :: Which Source IP Will Router Use For Outgoing ICMP
Jun 6, 2012I have router which has two physical interfaces Gi0/0 and Gi0/1. G0/0 connects to metro over ethernet and Gi0/1 is configured a s router on a stick, which has many defined. All those interfaces have IP addresses assigned. EIGRP is configured between other metro sites. Here is a sample IP assigment for this site, let's say Site.
View 3 Replies View RelatedCisco :: E1-CAS With E1 Controller On 2811 - No Outgoing Calls?
Nov 8, 2012I have programmed two E1 ports on Cisco 2811, one for E1-PRI and other for CAS. My running-config is as below
controller E1 0/0/0
framing NO-CRC4
clock source internal
ds0-group 1 timeslots 1-15,17-30 type r2-digital dtmf dnis
[code]....
I have made 4 as trunk group access on the PBX for E1-PRI and 8 as trunk group access for E1-CAS.I am able to dial 4-1-6261 to place calls on telephone 6261 from 6000(outgoing and incoming over PRI). And I am able to dial 4-2-6261 to place calls on telephone 6261 from 6000(outgoing on PRI and incoming on CAS).But I am not able to dial out from my PBX extensions over the E1-CAS card using 8-1-xxxx or 8-2-xxxx. I have patched two PBXs back to back on their E1-CAS ports and am able to dial out using 8-xxxx. So this means the trunk group allocation on PBX is working fine. The show controller e1 0/0/0 is showing normal stats.When I do a show voice port 0/0/0:1 I see that one of the ds0 timeslots are being seized when I try to dial out on 8-x-xxxx but the Out Status column entry against the timeslot says clear_bak.When I am placing calls on PRI, I don't see any such indication against the timeslot being seized.Basically since I am able to dial in to my E1-CAS port, the line coding, framing, signaling(to some extent) must be right, or so I guess. But am not able to dial out.
Outgoing Connection Attempt After Online Banking
Mar 2, 2012Something a little odd happened the other night. I had spent the afternoon updating all necessary programs where updates were available, did a GRC shieldsup test, did a clean and test of my system with AVG and MBAM. Everything looked fine.I went online that night however and as soon as I went to my online banking website, I noticed that there was an outgoing attempt logged in my firewall (ZoneAlarm). It was blocked. The IP address is 72.167.239.239:80 - which apparently fits in GoDaddy's IP range. Googled it and saw that someone else had the same issue.
View 2 Replies View RelatedStatic IP Splitting Off To Outgoing Devices Via Router?
Aug 13, 2012Trying to split a supplied fixed IP address to multiple wireless devices so that I can piggy back on the internet connection in my office. Cause the IT dept refuse to provide a router.I plank to use a router for the job above.
View 4 Replies View RelatedProtocols / Routing :: Using Port 1 - 80 For All Outgoing Traffic Possible With Application?
Oct 9, 2012I want to be able to use port 1-80 for all outgoing traffic. I have a VPS outside my home, which can redirect the packets to the prober ports.Is it possible with an application on the computer and VPS? Or is it impossible?
View 1 Replies View RelatedPort Forwarding Working For Incoming Traffic But Not Outgoing?
Feb 6, 2012I have a licensing server. Other computers need to turn on a program, they send a message to the licensing server, and it responds that they have permission to run.Until today the licensing server was plugged into its own ethernet wall socket and configured with a static IP address. Today I put a router into that wall socket and now the server's plugged into the router.The router (WRT-54G) was set to the static IP - and now the internet on its network works. I set all ports to be forwarded to the server's internal IP address - and now my programs can detect and ping it. But now the server won't send back permissions to use licensed software, or even reply with a list of the software which it can license.
View 1 Replies View RelatedLinksys Wired Router :: BEFSR41 V4.3 Won't Log Incoming Nor Outgoing
Jul 15, 2010I went a bought a brand new model V4.3. I had trouble installing it right from the word GO, but I did successfully get that acomplished, how ever one of the important features "logging of incoming and out going ip" won't work at all. I tried deleting the old logview.exe and rebooting everything, then installed the "new" logviewer.exe. Well absolutely nothing happens. I have double and triple checked the setting in the router...logging is turned on, the computer which has the logviewer.exe installed is the confirmed network ip i.e. 192.168.1.101 and I can and do access the internet and all other computers on the network from that computer.
View 9 Replies View RelatedCisco Firewall :: No Outgoing Calls To Outside After ASA5505 Installation
Dec 6, 2012Have a asterix PBX running my system and I upgraded my security with a cisco ASA 5505. Now all the extensions are working including the remote once. Everything elase like internet.Other servers all working fine. Only problem is that when ever someone dials a landline number from an extension it does not go through.seems like the firewall is blocking it but I cannot figure out why or how. All the NAT and Access list is fine. Although I have no idea how to accept the SIP PROXY IP through the firewall and I am guessing that might be the problem. There is no any other problem and I am 100% satisfied with the ASA5505 except this problem
View 3 Replies View RelatedCisco LAN :: 2651XM / Traffic-export Only Shows Outgoing?
Oct 12, 2012cisco 2651XM router with WIC1 adsl card and NM-16ESW switch
IOS: c2600-ipbasek9-mz.124-23.bin
I use the following config to export traffic from the adsl card to a fasterthernet port so I can look at the adsl traffic in wireshark on a pc:router(config)#ip traffic-export profile my_rite router(conf-rite)#int FastEthernet 0/0 router(conf-rite)#bidirectional router(conf-rite)#mac-address abcd.efgh.ijkl (mac address of PC) router(conf-rite)#exit router(config)#int dialer0 router(config-if)#ip traffic-export apply my_rite this config works and I can see stuff going on in wireshark but it's only one way. This config only shows traffic going out from my adsl card, but no incoming. There is defintely traffic going both ways because everything about my adsl connection is working perfectly. I've tried using a different fastethernet port, even tried exporting to a different pc but all I see is outgoing ie: source is my public ip address but never as destination . I have bidirectional in the config but it still only shows outgoing. I even tried a different IOS (c2600-adventerprisek9-mz.124-15.T8.bin) but still it doesn't show incoming traffic. Could it be my ISP in some way hiding incoming traffic from view?
Cisco WAN :: 2960 - Block Outgoing Multicast On L2 Port?
Aug 2, 2012is it possible to block outgonig multicast L2 frames on an Ethernet port in outgoing direction on a 2960 Switch?
I tried the "switchport block multicast" command, but the description of this feature relates to only "unknown" multicast!?
But what means "unknown multicast"? Even if activated, I see a lot of multicast traffic going out that port: IGMP, PIM, SSDP, HSRP, OSPF, .. and also pings and VLC streams to multicastaddresses (ip igmp snooping disabled).
I also tried to map a "mac access-list" to that port, but the "mac access-group" interface command is restricted to only incoming traffic.
Reason: we assume, that there are a couple of specific enddevices, that might react strange to some multicast. Therefor we would like to block outgoing multicast on that specific ports.
I tested it on a 2960 12.2(53)SE2
Cisco Routers :: WRVS4400N - VPN Tunnel Up But No Outgoing Traffic?
Jan 29, 2012we've buyed a WRVS4400N to create a IPSEC VPN tunnel to our client in order to access some applications.
After a while trying to configure the router, we have archieved it and the VPN tunnel is up. We can see the tunnel up from here and from client's side as well.
Our client supposendly have created the tunnel in order to access a list of specific IPs in the range 10.113.x.x, but if we try to access this IPs via telnet whe cannot obtain any response.
Making a tracert, we obtain...
C:UsersHuexxx>tracert 10.113.56.177
Traza a 10.113.56.177 sobre caminos de 30 saltos como máximo.
1 1 ms 1 ms 1 ms 192.168.0.1
2 * * * Tiempo de espera agotado para esta solicitud.
3 * * ^C
... and therefor the client doesn't receive any packet at its firewall.
I've tried to establish a static route for 10.0.0.0 255.0.0.0 to their remote gateway, but I'm unable to add any entry to static routing list... The router tries to do something, but afterall I cannot see the new entry...
What can I do to route the traffic through the tunnel?
Cisco :: 1900 Outgoing Email Doesn't Go Through Router
Jul 8, 2012We have Cisco 1900 Series Integrated Services Routers (has a wired router and a wireless router) and since this morning we can not send emails.I inquired with both the ISP and the hosting provider and all settings are correct.I can receive emails from outside the router, but can't send any emails out.If I try to telnet mail902.opentransfer.com 25 it doesn't connect.Port 25 is the port we were using all the time and was working through the router.I connected my laptop directly to the modem and was able to send emails using port 25, also was able to telnet to outgoing mail server. I didn't change anything in the router.is there a way to "enable" port 25 or "enable" mail.homeserviceclub.com (smtp server) or mail902.opentransfer.com (hosting mail server) if this would solve the problem?I don't understand why is this happening as I never had to enable or disable any email ports or mail server addresses.
View 3 Replies View RelatedCisco WAN :: 1841 How To Log Incoming And Outgoing HTTP Request
Dec 12, 2010I have a CISCO 1841 ROUTER and sins short our internet speed has decreased dramatically , it does not happens all the time , so I am sure it is not the ROUTER.I have put a small router (CISCO WRT 610N) and it was the same.When I look to the UP and DOWNLOAD GRAPH from my ISP , I see really BIG peeks.
View 2 Replies View RelatedCisco Routers :: WRVS4400N Block All Internet Outgoing
Oct 16, 2011When i try to active the Internet Access Police with Website Blocking by Keyword, the router WRVS4400N block any access to internet, the Access Restriction by time is disable. How i can active this feature without restrict all the access?
View 1 Replies View RelatedCisco Firewall :: ASA 5510 / PAT / ICMP Echo Outgoing IP
Apr 16, 2013I have ASA 5510 with soft version 8.4(5) installed. There are two interfaces:
IP 1.1.1.1/24 - inside
IP 2.2.2.1/24 - outside
I have configured PAT, so network 1.1.1.0/24 gets NATted to 2.2.2.2 address. Everything works fine, except I can't reach 2.2.2.2 via ICMP from the internet.
X.X.X.X 2.2.2.2 Deny inbound icmp src OUTSIDE:X.X.X.X dst OUTSIDE:2.2.2.2 (type 8, code 0)
But I have configured an access list allowing ICMP from any to any: access-list outside_access_in extended permit icmp any any
Thus address 2.2.2.1, which is binded to outside interface itself, is perfectly reachable via ICMP.
I've got two questions:
1) Is there a way to fix it? It will be handy for diagnostic purposes.
2) is it possible to configure the secondary IP address on the interface on ASA? I've read, that there are some complications.
Cisco Firewall :: ASA-5520 - Cannot Hear Outgoing Message
Dec 9, 2009We have setup the IP phone proxy on our ASA-5520, we had a couple of issues with the initial setup, but nothing major. It has been up and running for a few weeks and basically everything works perfectly just like we designed it except for 1 strange audio issue on outbound calls. We can make a call to anywhere, no problem, if the call is answered, no problem, perfect call setup and good quality 2 way audio. But if the person we called doesn't answer the call and that call goes to their voicemail we loose all audio from that point forward, we do not hear their outgoing message or get any prompts just dead air. The same situation appears to be true for any "recorded" service on the other end of the call.
View 7 Replies View RelatedCisco :: Increase / Decrease Switch Port Outgoing Buffer?
Aug 31, 2012I have a such setup:Code:
View 3 Replies View Related