What I Mean By "Two Connections On One PC".I Am A Youtuber So I Like To Play Games, Upload Stuff Etc.But The Problem Is That When I'm Uploading I Cant Play Games Because Of The Lag.So Is There A Way To Setup Two Connections (One For Uploading And One For Gaming Etc.)
View 1 RepliesI was simply surfing the net and installed a program. I then deleted the program and simultaneously i was unable to connect to the internet using wifi. Connecting to the internet is not a problem with the Ethernet cable plugged in. I have checked everything i can with the router and the wifi is still active. When i try to connect to the wifi, using the symbol on the taskbar, it tells me that there are no connections available.I also tried using my iphone personal hotspot and that was also undetectable.When i go into the device manager, the only icon that is flagged is the, network controller. I have un-installed it and rebooted, I have restarted it. Quite annoying i might add
View 1 Replies View RelatedAt any moment I have almost a thousand connections from / to my network attached storage (NAS), it's from D-Link (DNS-320) from unknown outside IPs.
I have a home network, everything sitting behind a Linksys router with a DD-WRT installed on it (here I see these connections). You can see the output here: url...
There probably would be many more connections, but the modem only allows so many. Unfortunately, they all use a different port (otherwise I'd just block that one). Because of all of this, my internet is very slow (connections are saturated)
Telus cell phone usb connection and a Lan ethernet connection, was trying to use windows 7 to bridge the two networks.
View 6 Replies View RelatedI have a dual boot computer - Vista Home Premium and Windows 7 Home Premium. When booted into Vista I can map my Network and connect to the Internet, a network printer (ethernet) and a second Windows XP computer. When I boot into Windows 7 I can still access the internet and my networked devices but I cannot map my network. Also, the network system icon (bottom right-hand screen) shows erroneously that no connections are available - but clearly they are! The attachments show the status of my Vista and Windows 7 connections. The only thing that appears to be odd is that my Windows 7 system is set to 'Public' and my Vist system is set to 'Home'. I have tried all manner of things to change Windows 7 to 'Home' but to no avail.
View 14 Replies View RelatedIt started when I couldn't connect to a specific website for 2 days. I had to change my IP to get on again, and when I did I got a message from the admin saying that I had been blocked automatically because my browser was using upwards of 200 connections at a time. He made me check all the browser settings for it, and everything was still set at default. I didn't download any program or add-on, I did nothing special. It started out of the blue. I did virus scans, I reinstalled firefox and opera (the browsers I use). At this point I have no clue what the problem is.
View 4 Replies View RelatedI use VNC all over my LAN.How do I make sure that it's secure and disable connections comming from outside my LAN?would forwarding the VNC port to a non-existing computer work? or would that just break my local VNC connections?I currently have some using ultravnc and some using tightvnc
View 1 Replies View RelatedThe problem started a few days ago, with no apparent catalyst. I'm running Windows XP SP3 on a computer I built myself. The ethernet controller is built into my motherboard, an ASUS P5Q SE PLUS. As far as I can determine, the ethernet controller is a Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC. Here's the ipconfig that I ran:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>ipconfig /all
[Code]......
I have recently had some problems with my home wifi connections however that has been resolved.A week after it was resolved, i noticed on startup my wifi did not appear on the connections tab so i have to restart my computer one or two times to make it appear
View 1 Replies View Relatedmy neibour has kindly said i can use her internet connection. she has a wireless router. i have my own internet, but need more speed. can i use both internet connections by connecting my router to hers wirelessly?
View 6 Replies View RelatedJust bought CLEAR WiFi and un trying to connect to it on my pretty old Windows XP but when I go to network connections all I see is Local Area Connection...there's no WiFi available but my clear router is right next to my desktop & its working on my Mac Ps3 and Phone ...and I can't open my available wireless networks..
View 8 Replies View RelatedI accendentally turn off the p.c. Without properly shutting it down... When I turn on the computer again, there is no more internet connection... I clicked the network icon on the siede to find out why... It is stated: Not connected; No connections are available... I clicked the "Troubleshoot" link, and accdg. To it: the local area connection is experiencing driver or hardware related problems... I clicked next and it says the wireless network adapter is experiencing problem... We are using wi-fi in our home..
View 3 Replies View RelatedI have A WAN and DSL for Internet connection in my work place and both are using differnet Network address which means both have their own routers and i have connected both on the same cisco switch.And my Question is how can i use both connection on one computer with out changing every time the ip address of the computer.
View 1 Replies View RelatedI have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. If one is connected and the other one tries to log in, it normally kicks out the first connection.I think this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Is there a work around, or would one of the other VPN protocols work? If so, how easy is it to set these up (I'm no IT professional)?Please note that the remote location in question is in a serviced office, so I'm not in a position to change or play around with their router.
View 1 Replies View RelatedPast few days I've been having problems with my WiFi connections. the modem connection to my desktop works fine.. i called the isp guy to fix it.. he did something to my roommates laptop and the WiFi works on it.. but any other device trying to connect to the WiFi connection doesn't seem to get the net.
As in like if i try to connect to the WiFi connection from my phone it shows that iv been connected to it but i cannot open anything.. no internet browser page, no fb, no whats app, no play store.. Nothing.. what could be the problem.. it was working fine a week back.. don't no what could have changed? and there is no problem with my phone.. cause i tested it to another WiFi connection as well.
I am working on a project at my company. In short, there is one PC in the office to which other user must remotely connect to perform certain tasks. The stuff they do must be done from the machine with the specific IP, the IP of that machine, as this is specified in agreements with the companies we work with. So far, we have been using Remote Desktop (our machines are Windows-XP-based PC's), but this is quite annoying when more than one person needs to use the machine at the same time
View 3 Replies View RelatedThe fastest dsl speeds here is 1.5mbpsand I need something around 3mbps+. I'm curious if I could buy two 1.5 connections from my ISP and connect them both into a router and then hook a switch up to it and connect my PCs and everything to it to get 3 or if I would still just get the 1.5?
View 4 Replies View RelatedTrying to connect to the internet using my gateway laptop. Using a belkin G. wired connection I get: "Local Area Connection" doesn't have a valid IP configuration wireless connection I get: "Wireless Network Connection" doesn't have a valid IP configurationMy desktop which is connected by ethernet cable works fine and my sisters laptop using wireless is able to connect as well. I'm assuming settings on my laptop are wrong.I'm running win7 and haven't had issues until lately. drivers are up to date.
View 1 Replies View RelatedMy dad just had to send his Acer Aspire back to the manufacturer to get the fan replaced. It came back factory reset and would not connect to any internet wired or otherwise. He called me and I asked him to bring it over. I can get it to connect to via Ethernet at my house, however, wireless is a no go. The status bar goes between "no connection available" to showing my network with two bars. When I attempt to connect to my network I get the standard "Window was unable to connect to this network". I currently have another PC, a PS3, a smart phone, and a tablet all connected with no problem (and all at full bars), so I know it's not the router. I ran an ipconfig /all and this is what I got: [code] One thing I did notice is that my IP Routing Enabled was set to NO and when I looked at how to fix that it said to update a registry key.
View 14 Replies View RelatedIs it possible to have two connections from a router to a switch?
Currently we have a wired connection going direct to the the switch however we would like to have a backup wireless connection via two range extenders.
i have 30 pcs hooked up under one network. all 30 sharing 1 internet connection. 10 of those are put in a separate room for certain reasons. but those 10 like to download and cause lag to the other 20 pcs. my plan is to keep the 30 pcs under 1 network but ill add another internet connection exclusively for the 10pcs. and the original internet connection exclusively for the 20 pcs. how can i do that? reason why i need all 30 in the same network is cause they all use softwares needed to be connected to each other locally.
View 3 Replies View RelatedI am having the same problem with a new computer via my home wireless connection. The computer will not connect to the internet at all while at home, but it will connect to the internet in other locations (like at school). My other computer connects to the internet without a problem. The computer that isn't working can recognize that there are wireless connections available, but cannot connect. I got the same message "the default gateway is not available."
View 14 Replies View Relatedjust bought a new monitor and graphic card (nvidia gtx 650), proceeded to install it, then installed the drivers. Now that my pc is much more good looking, i can't connect to internet anymore I'm writing this from my netbook, so my router works just fine. I tried to reinstall the graphic card videos, downloading the latest ones, and the drivers of my wireless usb adapter aswell (it's a tp-link TL-WN321G). I had no success, my pc still doesn't see any connection. I didn't find by googling many other examples of people unable to connect to internet after installing nvidia drivers.
View 5 Replies View RelatedI Buyed a new laptop yesterday(24-04-2012) so original W7 and i updated everything incl drivers and everything was great and i let the laptop on when i Was going to sleep and my wireless and lan internet did fine.. But then.. when i wake up suddenly it tells "No Connections Are Available" and i cant find any wifi's anymore + lan does not even work, but the adapters are both working fine it says + they are up to date, the router is fine cuz i have lan on pc and wifi on samsung galaxy, everything about wifi is on incl the button on the laptop..I only have 1 antivirus or so program and i have a red cross @ network and sharing settings?Network adapters (They both work): Atheros AR9285 wireless adapter & Realtek PCIe GBE family controller (both newest drivers installed)
View 3 Replies View RelatedI have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
I'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless). So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.how do you realize that without setting a Virtual Machine up?
View 9 Replies View Relatedi cannot find any connections!! i can with a eithernet cable but i want wireless!
heres my cmd wthout the eithernet cable
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersStewart>ipconfig /all
[Code].....
I am in a house with 3 laptops connecting to the same wireless router, the connection speed is 3Mbps. Two of the laptops have no problems connecting to the internet but mine does? Every so often is will just disconnect and when you look for the wirless networks it does not detect any. A restart is required and all is ok, but not for long.
View 5 Replies View RelatedPresently I am using a wired router for internet surfing etc. I am using 2 pc's and both have wireless connection capability. I can see that there are wireless connections in my area and they are secured connections. If possible is there a way to connect wirelessly to one of these?
View 2 Replies View RelatedMy ipod and my brothers ipod both detect and connect to our wireless network. Our PC connects to the network through a wired connection and is having no problems. I got a new laptop, have Windows 7 professional installed, and my computer will not detect any networks. I even tried unplugging the cable from the back of my PC and plugging it into my laptop, and it still does not detect a connection[CODE]
View 4 Replies View RelatedI have a two broadband (Indian standards) connections that I want to use together. One is a 1mbps and the other is a 512kbps. The config that I have is below.
OS: Windows 7
Laptop: Acer Aspire
Router 1: Buffalo AirStation WHR-G54S
Router 2: ZyXEL P-600
I read about it on a few boards but I couldn't find any proper info on that.
a few weeks ago I started hosting a server for a game from my computer. It's been working fine and I've been having no problems except for one.After a few hours of hosting my server, my internet connection will immediately drop down to 1.0mbps, and I lose all connection to everything until I reboot my computer.I'm using a wireless internet adapter right now and having this problem, but when I used a wired connection a similar thing would happen where my entire connection would "lock up" in a way. I couldn't connect to anything until I rebooted my computer
View 4 Replies View RelatedWhen I check available Wi-Fi networks it says "No connections are available. All of our other computers work so I dont know what the problem is. When I check device manager for the adapter it says my adapter is enabled so I dont know what the problem is. How can I get it to recognize my wi-fi?
View 1 Replies View Related