Ubuntu 6400 How To Get Wireless LAN And 10 / 100 Running Simultaneously
Oct 13, 2011
I am running Ubuntu 10.10 on a Dell Inspiron 6400.I am able to get 10/100 Ethernet card and Wireless Lan working independently. If I restart/reboot my eth0 turns starts up fine.If I then manually start my wireless connection (eth1), eth0 disappears.
There seems to be issues with wireless drivers: I don't have the cleanest solution but I run this script: [code]
Is there any way I can have them running simultaneously? From reading around I believe it's possible but not quite sure what I'm doing wrong.
View 1 Replies
ADVERTISEMENT
Mar 29, 2013
I just came upon an old inspiron 6400 and i'm trying to get the wireless internet on it.
i believe there's a "card" (maybe, Sierra wireless aircard 580) missing and that would be why i cannot connect. Here's what i got on a linux command linedoom@Zombimatic / $ sudo
[Code].....
View 1 Replies
View Related
Dec 4, 2010
My Inspiron 6400 network card keeps disconnecting from my wireless network. In order to get it working again, I have to turn off the wireless fn key and turn it back on again. This usually works for a few minutes than I lose connection again. Is there anything I can do to correct this?
View 20 Replies
View Related
Jan 18, 2012
I have a local wired network without the internet connectivity. It is just 3 computers connected to a router with hard wire (Not connected to outside world). For Internet I use Xfinity Wifi and connect wirelessly. However As soon as I connect the wire to the laptop the internet connectivity is lost.It says access is local only.I have no idea why it is going to the gateway after Xfinity wifi.If I disconnect the wire the internet is connected immediately. However I want to be able to see the web as well as other computers on my local network simultaneously. I tried to google several sites but could not find anyone with a similar setup (One without outside connection and one with internet connectivity)
View 3 Replies
View Related
Jul 9, 2012
I have a Dell Inspiron 6400 running Windows Vista with a Broadcom 440x10/100 Integrated Controller. I've had the computer for 5 years, and have always connected to the internet using wireless with no problem. Just moved to a new place, don't have a router yet, and now when I try to connect via the ethernet cable my internet is sooo slow, taking about a minute to load a page. My roommate's computer runs great using the ethernet.
View 1 Replies
View Related
Feb 8, 2012
situation is a little bit different than the other gyus. I have a private network of 3 laptops connected with wire to a local router (Not connected to the internet)Whenever I need internet I connect to Xfinity Wan Wirelessly. However in order to do that I have to disconnect wire first. Otherwise both connections show "Local only" The moment I disconnect the wire the Xfinity connection shows "Local and Internet" How can I access Xfinity and my wired laptops simultaneously
View 2 Replies
View Related
Jan 29, 2013
For some reason my card stopped working, I tried reinstalling the driver, fn + f2 (to activate my card from my keyboard), and a few others basic thing, nothing is showing up, where I am with other PC I can see at least 5 networks. my PC gets nothing,im running vista 32bitintel pro wireless 3945ABGdell inspiron laptop 6400I also tried a fixit microsoft tool for network, didnt work,Im on the net now using wired cable from my router, and its ok but I need my wireless on the road------------I have uninstalled reinstalled the driverI did a fresh format last weekI cant reset TCP IP. I get access denied, even in safe modeI did use many different use for removal of malware on my pc. im using avgchkdsk found no problems*** I did try alot of things, what can be doneWindows IP Configuration
Host Name . . . . . . . . . . . . : john-PCtopPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing
[Code].....
View 3 Replies
View Related
Aug 30, 2012
I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.
The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.
My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.
View 5 Replies
View Related
Nov 27, 2011
My PC running on Windows 7.I'm connected Internet via Wireless adapter. [code] But after connect VPN i'm not able to connect Internet anymore. I think because there are 2 gateway in there. and the default gateway become vpn network. In my case. How to connect vpn client and internet wireless adapter simultaneously?
View 1 Replies
View Related
Jan 28, 2013
Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal?
View 4 Replies
View Related
Aug 2, 2012
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.
If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.
While router is on, the PC shows limited or no connectivity.
I tried reseting the router 2-3 times.
On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.
View 1 Replies
View Related
Jun 7, 2012
I have re-installed the operating system (vista) on my Dell Inspiron 6400 and now I can only get a local connection when trying to access the internet.
View 2 Replies
View Related
Jun 12, 2011
My laptop won't find an ip address and connect to the Internet right now I'm using my iPod. I know the Internet is working. I have a Dell inspiron 6400. Two days ago I had an Internet connection but I had to switch it so it would automatically find an ip address. I cAn get a connection at my moms house and it works just fine but any where else it can't find an ip adress. I've gone to start>run>cmd>ipconfic then I go type in that ip and it connects but won't let me connect on a browser or messenger.
My laptop won't find an ip address. I'm only 14 and I've tried everything I could think of. Two days ago it would connect to the Internet but wouldn't connect on a browser or messenger so I hadda change the tcp/ip to automatic then it worked but now with different wireless Internet it can't find an ip address
View 14 Replies
View Related
Sep 8, 2008
I have an Inspiron 6400 XP SP3 Intel PROset/wireless Wi Fi
Belkin Wireless G Router (supplied by Dell with the laptop)
I had to do a clean install of the laptop. Until then good connection no problems BUT since the clean install I am experinecing intermitant problems Wifi connecting to the router. The wireless finds the router without fail but won't always connect. When is doesn't, a reboot makes no difference but power cycling the router always works. After hours of strong connectivity the connection drops out unpredicatbly.
I have tried updateing the driver for the wifi NIC and the Proset software direct from intel which seems to make no difference.
View 17 Replies
View Related
Oct 18, 2011
I am running a rather old Dell Inspiron 6400 on Vista. Recently Virgin installed their latest Hub / wireless router for me and since then i cannot make a wireless connection to the internet. Before that I use to be able to connect to my old router (Linksys Wireless-G 2.4Ghz) no problem! I can connect via the ethernet cable no problems. The WiFi is on and even when I disconnect the ethernet cable, the bottom right hand corner symbol says that I am connected but I cannot load the internet and keeps giving me this message:"The URL is not valid and cannot be loaded."The Virgin Media support team ran a check and told me that my wirless adaptor is out of date and needs updating so I went on Dell Support, downloaded and installed the follwoing drivers but still no joy!
1) Broadcom diagnostic utility 440x 10/100 utility controller
2)Broadcom driver 440x 10/100 utility controller
3)Dell Driver Wireless 1390 WLAN Minicard
I have also ran a wireless WLAN utility diagnostic check through the control panel. In the Connection diagnostics, the Gateway IP Ping 'failed' and I think as result of that the Internet IP Ping, DNS IP ping and internet website domain name ping all 'skipped' but all else passed.
View 18 Replies
View Related
Feb 9, 2011
I have a IBM 6400 printer that is connected to our cisco 3750 switch and the problem is that every 5 to 10 min the printer drops off the network.Testing that I have conducted is the following:
Attached a small unmanaged switch to the port that is connected to the printer and connected the printer as well as a laptop to the unmanaged switch. The printer again loses connection to the network after 5 to 10 min. Connected the printer and the laptop to the unmanaged switch, but this time did not connect it to the network and the printer stayed online.
I have had IBM come in and update the printer firmware, but this has not fixed the issue either.The printer has a static IP and we are not seeing any other issues with devices except for this printer. The IBM techs are scratching their heads and pointing to the network as the problem. While from my testing I have to agree, but I cannot see what is causing the issue. The only other thing I can think of it would have anything to do with is the MAC address time or perhaps the ARP timeout. I am just having a tough time identifying the root issue and further testing.The network is pretty flat and is only a /23. Being that it is all local to the LAN routing should not be a factor, but I am willing to try anything to get this issues addressed.
View 1 Replies
View Related
Jul 15, 2012
I have a IBM 6400 printer that is connected to our cisco 3750 switch and the problem is that every 5 to 10 min the printer drops off the network.
Testing that I have conducted is the following: Attached a small unmanaged switch to the port that is connected to the printer and connected the printer as well as a laptop to the unmanaged switch. The printer again loses connection to the network after 5 to 10 min.
Connected the printer and the laptop to the unmanaged switch, but this time did not connect it to the network and the printer stayed online.I have had IBM come in and update the printer firmware, but this has not fixed the issue either.
The printer has a static IP and we are not seeing any other issues with devices except for this printer. The IBM techs are scratching their heads and pointing to the network as the problem. While from my testing I have to agree, but I cannot see what is causing the issue. The only other thing I can think of it would have anything to do with is the MAC address time or perhaps the ARP timeout. I am just having a tough time identifying the root issue but how to do further testing.
The network is pretty flat and is only a /23. Being that it is all local to the LAN routing should not be a factor, but I am willing to try anything to get this issues addressed.
View 16 Replies
View Related
Jul 3, 2009
i just reinstalled windows on my laptop and i figured i could just download drivers from the dell website. after following the installation order specified on the website.. installing first the NSS and then the chipset, etc.. I realized there wasn't a driver for the NIC on the website. i also noticed that the steps didn't include a step for ethernet drivers, so i replaced the NIC step with installing the broadcom integrated controller. unfortunately, after completing the rest of the installation steps, my Network Controller driver is still not installed (looking in the device manager), a hardwire connection through the ethernet cable gives me "limited or no connectivity" and there is no wireless capability whatsoever.
dell inspiron 6400, now running windows xp home edition with SP2
View 8 Replies
View Related
Oct 4, 2012
We encouter problems flow between two switches at work. The first is a Cisco 3550 and the second is an Alcatel 6400. For the tests, I connected a PC on each switches on acces port. The 2 switches are connected by a trunk port (the 24th for each switches).
I forgot to tell that the 2 switches are on the same vlan (5). I made some tests and it takes about 2 minutes to transfer 45mo from one pc to the other one.
I can give a part of the configuration :
! Stack Manager :! Chassis :system name vxTargetsystem daylight savings time disable! Configuration:! VLAN :vlan 1 disable name "VLAN 1"vlan 5 enable name "toip"vlan 5 port default 1/1vlan 5 ip 192.168.0.0 255.255.255.0! VLAN SL:! IP :ip service allip interface dhcp-client vlan 1 ifindex 1ip interface "toip" address 192.168.0.253 mask 255.255.255.0 vlan 5 ifindex 3! IPX :! IPMS :! AAA :aaa authentication console "local"aaa authentication telnet "local"aaa [code] ..............
View 2 Replies
View Related
Nov 13, 2009
I recently upgraded to Window 7 (from XP)
Everything works great, even my bluetooth mouse, but my Dell BH200 Bluetooth Stereo Headset doesn't work
find the driver (to download) so that I can get my headset to work.
In Summary:
need driver for my Bluetooth BH200 Headphones I have Windows 7 operating system my computer is a a Dell Inspiron 6400 laptop.
View 4 Replies
View Related
Nov 7, 2008
I have a Dell Inspiron 6400 laptop running and with a Dell 1390 WLAN mini-card installed and a Broadcom 44/10x100 integrated controller.
Unfortunately I've never been able to get this laptop to function with my wireless Internet.
Everything's working out nicely, and the computer connects to the network smoothly. After 5-10 minutes of full and unproblematic Internet connection the computer crashes the wireless network i.e. the Inspiron and all other computeres connected to the network is disconnected and my wireless network no longer shows up on the list of available networks.
The network works perfectly with every other computer I've used with it.
I've installed the newest drivers for both the 1390 and the integrated controller from this site. And my Vista is of course also fully up to date.
I've also tried turning the antennae settings to "aux" - Alas, to no avail.
View 55 Replies
View Related
Jul 29, 2012
i have two diffrent-2 network connection and now i want to use both connection for load balancing and speed browsing.
View 2 Replies
View Related
Jul 4, 2011
will the use of mobile wireless internet connection and broadband inet connection simultaneously can be used to download softwares or video files faster than these two used seperately?
View 2 Replies
View Related
Jan 21, 2011
I have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies
View Related
Jun 13, 2011
I have a Sony Viao PCG-71312L laptop that has Windows 7, 64-bit as OS. I loaded on Ubuntu as want to learn more about Linux. The wireless locator finds the signal but won't connect.It says "ethos" and then when you click from there I don't get through. Just seems to keep looking forever, then says after 3 minutes can't connect.It could be I need a specific driver for the Ethernos wireless device, I am not sure. Further I am had a hacking where I had to change wireless settings so I may have done it myself. I am able to connect on my Windows 7 wireless network account but not the Linux one. I tried deleting the account on the Linux Ubuntu that shows up but this didn't work.May have made worse.Is this on my wireless device side, meaning I need to change/get password ect or the Ubuntu side where it's some type of common problem. Do I need to access through the router web page? Incidentally that's blocked for me too.
View 2 Replies
View Related
Oct 13, 2012
I want to connect two laptops for experiment purpose. I do not want to use the internet on any of them , just be able to ping from one pc to another and SSH into them. The use is basically for a mobile robot , one pc on the robot and another one to control and see the processes using SSH. How do I use a wireless router to create such a network? I am using Ubuntu on both system (I tried ad-hoc but its not working).
View 1 Replies
View Related
Dec 26, 2012
I want two connect two usb modem simultaneously on the same pc.How can I?
View 5 Replies
View Related
Jul 20, 2011
I am running windows xp on an old desktop, I am using a wiresless usb adapter to utilize a wifi connection available in the dorms. to connect, i have to enable proxy on the browser I am also using an Ethernet connection via a LAN cable, which does not need a proxy to run
The issue is that although i browse freely using both connections simultaneously by using two different browsers, with the proxy setting enabled in one and disabled in the other, i can not run uTorrent when both connections are enabled. i have to go into network neighbourhood and disable the wifi connection, and only then does downloading start. the university does not allow bit-torrent downloading on the wifi connection so i have to use the ethernet.
View 1 Replies
View Related
Jan 3, 2012
Can i connect two internet dongles simultaneously to my internet n get more speed?
View 1 Replies
View Related
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
View Related
May 7, 2013
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies
View Related
Jan 28, 2012
is it possibe to set up a ubuntu linux PC on a linksys wireless router? linksys says "no". also where would I get the printer, wireless card, and sound drivers. it's a dell latitude running a pentium m (yeah, i know).
View 10 Replies
View Related
Sep 26, 2012
I've tried two operating systems (Ubuntu 12.04 and Windows XP) two different wireless adaptors (Dell M1530 internal adaptor and Alfa USB Adaptor which I get full bars on) and tried a different Dell M1530 laptop which I'm also having issues with. I've also tried to diagnose the network with a tool, but I'm totally unable to connect to it so I'm unable to get any more information.If I try to connect to an unsecured network, it works perfectly. I'm totally stumped about this, due to the fact that I've used two different operating systems, two different adaptors and two different laptops (albeit the same brand).
View 4 Replies
View Related
