Using Wired And Wireless Simultaneously

Jan 18, 2012

I have a local wired network without the internet connectivity. It is just 3 computers connected to a router with hard wire (Not connected to outside world). For Internet I use Xfinity Wifi and connect wirelessly. However As soon as I connect the wire to the laptop the internet connectivity is lost.It says access is local only.I have no idea why it is going to the gateway after Xfinity wifi.If I disconnect the wire the internet is connected immediately. However I want to be able to see the web as well as other computers on my local network simultaneously. I tried to google several sites but could not find anyone with a similar setup (One without outside connection and one with internet connectivity)

View 3 Replies


ADVERTISEMENT

Connecting Wired And Wireless Simultaneously?

Feb 8, 2012

situation is a little bit different than the other gyus. I have a private network of 3 laptops connected with wire to a local router (Not connected to the internet)Whenever I need internet I connect to Xfinity Wan Wirelessly. However in order to do that I have to disconnect wire first. Otherwise both connections show "Local only" The moment I disconnect the wire the Xfinity connection shows "Local and Internet" How can I access Xfinity and my wired laptops simultaneously

View 2 Replies View Related

Cabling / Cards :: Run Wired And Wireless Connectivity Simultaneously?

Aug 30, 2012

I have 300Mbps PCI wireless LAN network card which I installed in my PC and until today I was connected to my Sky router wirelessly. I also have a wireless Brother all in one connected to the same PCI card.

The engineer who installed my Sky fibre broadband told me in order to achieve maximum speeds I should connect via an ethernet cable to my Sky router as wireless could be a lot slower so I bought one and connected up and disabled the wirelss card. All good so far until I noticed my Brother all in one was complaining about no network ID.

My problem is that I can't seem to run my printer wirelessly as well as run my broadband wired. If I enable the wireless adapter the printer works but my broadband is wireless as well and the wired connection is disabled.

View 5 Replies View Related

Ubuntu 6400 How To Get Wireless LAN And 10 / 100 Running Simultaneously

Oct 13, 2011

I am running Ubuntu 10.10 on a Dell Inspiron 6400.I am able to get 10/100 Ethernet card and Wireless Lan working independently. If I restart/reboot my eth0 turns starts up fine.If I then manually start my wireless connection (eth1), eth0 disappears.

There seems to be issues with wireless drivers: I don't have the cleanest solution but I run this script: [code]

Is there any way I can have them running simultaneously? From reading around I believe it's possible but not quite sure what I'm doing wrong.

View 1 Replies View Related

How To Connect Vpn Client And Internet Wireless Adapter Simultaneously

Nov 27, 2011

My PC running on Windows 7.I'm connected Internet via Wireless adapter. [code] But after connect VPN i'm not able to connect Internet anymore. I think because there are 2 gateway in there. and the default gateway become vpn network. In my case. How to connect vpn client and internet wireless adapter simultaneously?

View 1 Replies View Related

Cisco Wireless :: AIR-CAP3502I Run Both 2.4Ghz And 5Ghz Simultaneously?

Jan 28, 2013

Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal?

View 4 Replies View Related

Linksys WRT54GS2 Router - Wireless Internet Not Working With Two Devices Simultaneously?

Aug 2, 2012

I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.

If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.

While router is on, the PC shows limited or no connectivity.

I tried reseting the router 2-3 times.

On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.

View 1 Replies View Related

How To Use Two Different Internet Connections Simultaneously

Jul 29, 2012

i have two diffrent-2 network connection and now i want to use both connection for load balancing and speed browsing.

View 2 Replies View Related

Using 2 Internet Connections Simultaneously?

Jul 4, 2011

will the use of mobile wireless internet connection and broadband inet connection simultaneously can be used to download softwares or video files faster than these two used seperately?

View 2 Replies View Related

Use Two Usb Modem Internet Connections Simultaneously On One Pc

Dec 26, 2012

I want two connect two usb modem simultaneously on the same pc.How can I?

View 5 Replies View Related

Wifi And Ethernet Do Not Work Simultaneously?

Jul 20, 2011

I am running windows xp on an old desktop, I am using a wiresless usb adapter to utilize a wifi connection available in the dorms. to connect, i have to enable proxy on the browser I am also using an Ethernet connection via a LAN cable, which does not need a proxy to run

The issue is that although i browse freely using both connections simultaneously by using two different browsers, with the proxy setting enabled in one and disabled in the other, i can not run uTorrent when both connections are enabled. i have to go into network neighbourhood and disable the wifi connection, and only then does downloading start. the university does not allow bit-torrent downloading on the wifi connection so i have to use the ethernet.

View 1 Replies View Related

Connect Two Internet Dongles Simultaneously?

Jan 3, 2012

Can i connect two internet dongles simultaneously to my internet n get more speed?

View 1 Replies View Related

Computer And All Connected LAN Devices Freeze Simultaneously

Jun 10, 2012

It started happening back in around November, my sister and my computer would start freezing occasionally, slurring the audio into a robotic sound, eventually to come to.It gradually got worse, and I assumed it was a graphics card problem since it would freeze ONLY SOMETIMES and say that the graphics driver stopped working and has recovered. It usually didn't say that, though.Lately though, I noticed that when it would freeze sometimes the internet would go out for some connected devices, such as the Xbox 360. The only computer that was NEVER affected by this is the one connected directly by Ethernet to the Netgear router, (every other device is WiFi.)

Sometimes even, my sister and mine would freeze simultaneously. It was a sort of rare occurrence, though.I very lately started to notice that it would freeze when trying to load internet components with larger amounts of data, such as server console logs, Flash videos, and Soundcloud players. What threw me off is that it would sometimes freeze in programs like FL Studio or Windows Media Player... It's possible I guess that the programs were unrelated and what caused the freeze is SOMETHING sending/receiving corrupt packets.

View 6 Replies View Related

Cisco WAN :: 2811 - No Access To Both Links Simultaneously?

Apr 21, 2011

We suffer some problems with our remote 2811, that has two WAN links (two different ISP) - we cannot get access to both of WAN at the same time.
 
At first, the aim was to load balance the traffic between wan links: at first we tried to use OER, but users complained about instable internet connectionthen we tried PBR + NAT Generelly we have just the same scheme as [URL] : dual WAN linksPPTPPPPoE over ADSLequal static routesNAT using route map The problem itself: When both links are up,  the 1st WAN is pingable, and the 2nd is notWhen the 1st link goes down the 2nd becomes pingable and accessible and vice versa. When I disabled the CEF, the 1st was still pingable and the 2nd became pingable too, but very unstable 

View 3 Replies View Related

Home Network :: Connect To 2 Internet Connections Simultaneously

Jul 3, 2011

I'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless).So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.

View 7 Replies View Related

Comcast Business Internet Upload / Download Simultaneously

Dec 22, 2011

I just got installed a business class internet service installed. Got the 25/5 line and when I perform the speed tests I get well above that with the speed boost on the lines.When I am downloading large files I am getting a constant 22-25 down and when I am uploading files I get the 5 up.... But I can't do both at the same time.What happens if my uploads kill my download speed so if I am uploading a file and taking up my 5 up it makes my download speeds about 2-3.. Comcast is saying that this is how the network works and I just don't want to accept that at this time as I have other internet providers that don't work this way and I get a true up/down at the same time. Unfortunately at this location that I am dealing with Comcast is the only choice.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: Can Operate Simultaneously Multiple External DB In ACS 4.2

Jan 24, 2012

Can operate simultaneously multiple external DB in ACS 4.2?Mutiful External DB server is AD and Token server

View 1 Replies View Related

Windows 7 - Onboard Nic Disallows Usb Wifi Adapter To Work Simultaneously?

Mar 28, 2011

I have an HP W7 (Home Premium) PC.

I have a wired connection (on-systemboard network interface) to a Belkin 54g router, but the router is not physically connected to the internet (no ethernet cable out to a cable modem/whatever). The router connects several necessary peripherals - mostly wirelessly to the main PC and another W7 PC.) All this stuff worked prior to a move to a new location.

There is freely accessible Wifi in range (public library - wherein I could concievably carry the whole PC and use their WiFi with their blessing).

I attached a USB Wifi adapter to the PC to avail myself of the free service, but W7 will not allow the Wifi adapter to be seen until I detach the ethernet wire. Then it will allow me to see the available network, and connect.

How does W7 (or the system board) look at network? Are they (onboard NIC and USB) mutually exclusive? Do I need a separate ethernet adapter card or a separate USB adapter card to create a different "channel" that would allow the two networks to coexist?

View 3 Replies View Related

Connect Two ISPs On LAN Simultaneously In Order To Boost Internet Connections?

Jan 10, 2011

How can I connect Two ISPs on My LAN simultaneously in order to boost my internet connections?

View 1 Replies View Related

D-Link DCS-930L :: Camera Support Multiple Destinations Simultaneously?

Aug 31, 2011

Can the camera support multiple destinations simultaneously?

In testing set-up for ftp and email, while observing results in a browser on the Mac, and also MyDlink app on an iPad, I observe that a few jpegs get sent to email, a few to ftp, and MyDlink keeps "timing out". My Mac is wired gigabit ethernet to the router, and the wireless LAN is 802.11n.
Maybe it can't handle multiple destinations?

Does MyDlink cause continued transmissions at the video frame rate set in the setup panel, even if no one is connected to look.

View 14 Replies View Related

Cisco Routers :: RV220W To Support Dual Band Simultaneously

Jan 11, 2012

Cisco RV220W works in 2.4GHz or 5GHz.There is any plan to support these bands simultaneously?

View 1 Replies View Related

Cisco WAN :: 1841 / All Sessions Simultaneously Fail EIGRP And Restored Within Seconds

Nov 18, 2012

currently on my Cisco 1841 router I have configured EIGRP protocol, my problem is that all sessions simultaneously fail EIGRP and restored within seconds, all come from different sources. The IOS version is 12.4 (25g).

View 5 Replies View Related

Cisco Switching/Routing :: C3KX-NM-10GT Network Module Working At 1Gb And 10Gb Simultaneously

Aug 14, 2012

I know that the C3KX-NM-10GT network module has two (copper) ports that support speeds of 1Gps or 10Gps. Could this module work with one port at 1Gb and the second port at 10gb simultaneosly? It's possible to work each port of the module with different speed (one port working on 1Gb mode and the other working on 10Gb mode)?

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 4500E Supervisor Engine 7-E / Possible To Deploy Simultaneously Both Type Of Ports

Aug 8, 2012

We've got a doubt about the uplink ports of this supervisor. I've read that you have to use the four ports in 10G mode or in 1G mode, but not use for example 1 port in 10G mode and 1 port in 1G mode:
 
But, you can read in another sentence: " Beginning with Cisco IOS Release 12.2(25)SG, you could simultaneously deploy the dual 10-Gigabit.Ethernet ports and the four Gigabit Ethernet SFP ports on the Catalyst 4503, Catalyst 4506, and Catalyst 4507R chassis." Is it posible deploy simultaneously both type of ports?

View 2 Replies View Related

Linksys Wired Router :: EA4500 - Wired Connections Have Long Ping Times

Sep 23, 2012

I purchased and set-up the EA4500 on Thursday.  Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues.  Connected directly to modem I get normal ping times on whichever computer is connected.  When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms.  They are all over the place 30ms (I can live with that), up to the 900's.  I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference.  I did end up doing a hard reset on the router last night after I lost tech support.  We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
 
It was so slow on my work computer, a pint to yahoo timed out.  The computers connecting to router are
 
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP

View 5 Replies View Related

Linksys Wired Router :: E2000 - Security Wired Ethernet Connections

Sep 19, 2011

I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive.  I am planning to allow a tenant in another building connect via an ethernet cable connected to my router.  Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router?  I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.

View 1 Replies View Related

Linksys Wired Router :: E4200 No Longer Accepts Wired Connections?

Oct 11, 2012

My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.

View 2 Replies View Related

Linksys Wired Router :: BEFSR41 Two Wired Routers In Non-standard Hookup

Sep 14, 2011

I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off).  All computers and other devices connected to it are manually IP configured.  I desire to add a device that cannot be manually configured, and needs DHCP.  I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network).  The new device needs two-way internet access, but doesn't care if it sees any other current network devices.  I've tried several configurations, none seem to work.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 Keeps Losing Wired Connection To WAP54G?

Apr 11, 2012

I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81.  I'm not sure if this is an issue with the WAP or the router.
 
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time.  I used to have the power settings such that it didn't power down completely even after a long time.  With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died.  The wireless link would report that it had a solid connection, but I couldn't connect to anything.  Power cycling the WAP always fixed this.
 
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours.   Now, it seems I can't even go one day without losing my connection.
 
I am running the latest frimware in the WAP, and the router is version 3.1.  I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen.  I know from past experience that I will have to power cycle it to get it to talk to me again. 
 
In any event, it seems like the router connection to the WAP is timing out.  I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.

View 3 Replies View Related

Linksys Wired Router :: BEFSR41 - Convert Wired Router To Hub?

Jun 16, 2011

I have an old BEFSR41 ver. 2 wired outer that I'd like to use with a motorola modem/router as a hub.  Is this doable?

View 2 Replies View Related

Wireless :: Adding To The Wired LAN

Apr 30, 2012

possible solutions to add the wireless LAN to wired LAN of the organization for providing the flexibility in accessing the organization services i.e.,which type of hardware is needed and what changes i have to do and suggest me the best solution in terms of speed,distance, cost for redesigning, cost for training for the employees, maintenance cost, security.

View 3 Replies View Related

Wireless Faster Than Wired?

Mar 6, 2011

If i go wired i get 100mbps on both my laptop and desktop unit if i switch to wireless they both go 135 to 150 mbps any ideas? both units have megabit cards. My laptop i use at work at 1.0gbps no problem. It doesnt change no mater where i plug into at home or with different cables same speeds

View 2 Replies View Related

Isolate Wireless From Wired?

Mar 6, 2012

i have 3 netgear dg834g wireless routers. router1 has the adsl connection, router2 and router3 are connected to the ethernet ports of router1. All the wired computers are for the office desktops and the epos terminals on the restaurant floor.

we'd like to give wireless access to our customers but we don't want them to be able to access our epos terminals, could subnetting be used to make this work or would i require additional hardware?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved