Unable To Access Internet Using IE On Window Xp
May 13, 2011
I had a problem with client computer unable to connect to internet. the system is connected wirelessly and the signal strength ok. i tried it with another broswer, the same thing too. But when i used static ip addressing it was ok. this is our dns and dhcp address: 192.168.3.11 and the default gateway. but when i pinged the default gateway it way replying. using ipconfig /all:192.168.3.6 which is the peplink router switch it did show default gateway. and we are using dhcp in our organisation. Below are the command i carried out.
View 7 Replies
ADVERTISEMENT
Dec 11, 2011
We have a site where uses are unable to login to an application. After running a packet trace on the traffic coming from the site to the server they are trying to access, the trace indentifies that the client pc is sending a window size of zero to the server, and it does this twice. So in essence the client is saying it is too busy. This is strange as all the other applications work for the users and it is only this one application that is experiencing issues. The only other issue is that there is some retransmitted traffic before the client sends window size.
View 2 Replies
View Related
Dec 17, 2012
Windows is unable to connect to the selected network. The network may no longer in range. Please refresh the list of available networks, and try to connect again.This message poped up during connecting to a wireless network
[code]...
View 11 Replies
View Related
Jan 16, 2013
one of my client just installed window 8 and he is not able to connect with anyconnect anymore. if he connect with ASA for anyconnect version 2019 it work fine. but i have tried all different version on router. but when user try to connect with router for anyconnect then there is gateway error. it ask for connect anyway then it stop. connection failed. i tried 00605.. anyconnect on router but still no luck. i think, i have to make some changes. but dont know what changes on router. window 7 has no issue.
View 1 Replies
View Related
Jul 3, 2011
I have have my Dir-655 set up as an access point for awhile and would like to change the wireless access code. I can't seem to figure out how to access the setup menu while it is an access point to do this. How I access the router when it is set up as an access point?
View 4 Replies
View Related
Jul 11, 2012
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bitProcessor: AMD Turion(tm) 64 Mobile Technology ML-28, x86 Family 15 Model 36 Stepping 2Processor Count: 1RAM: 1150 MbGraphics Card: ATI RADEON XPRESS 200M, 128 MbHard Drives: C: Total - 238464 MB, Free - 182597 MB;Motherboard: Quanta, 3093Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: EnabledOkay, that's one Notebook. The other is a Gateway w34OUI running XP Media Center. Both are in great condition for their ages. Good for them. I really want to network the two with an RJ45 crossover cable, and all the instructions I've found on our illustrious internet tell me it's easy. HOWEVER, when I've only begun to follow those instructions (one list is from the God Microsoft itself), NONE OF ANY of the sets of instructions matches the steps offered on either one of these notebooks. The options do not correspond. The results do not correspond. The closest I get is a window that says I do not have access to such file sharing. These are MY computers, and have always been, and I am attempting to network using administrator ID logins on BOTH. What's the REAL way to network only two notebooks with an RJ45 crossover cable?
View 1 Replies
View Related
Aug 3, 2011
I am using wire less internet in a public space with my personnel lap top, my question is how to stop unauthorized access to my lap top desk top, drives and other files.
View 1 Replies
View Related
Dec 21, 2012
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
I seted up router and i coud acces the utility window, then i switced from w7x32 to w7x64 and then i try to acces the utility window i can only see.Username or Password is incorrect.Is the "Caps Lock" enabled on your keyboard? The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.Forgot your username or password? Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin". The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.no pop up window appears i tried looking this up and the closest thing i found was to un-check the proxy but its not checked so what should i do to be able to access utility window?
View 3 Replies
View Related
May 18, 2011
Today I got the Win 7 virus on my laptop and did a system restore under safe mode and downloaded malwarebytes via pen drive from another computer and did the full scan and nothing came up. Computer is now showing nonsigns of the virus but Internet is unable to connect to the wireless. My regular virus protection isn't working well either, it won't let me scan my computer and real-time scanning keeps turning off after I set it on.
View 1 Replies
View Related
Nov 28, 2012
I installed windows XP and now I connect a cable from the router to the pc and I can't connect to the network.
View 1 Replies
View Related
Apr 27, 2011
Ok so I am accessing the Internet by LAN cable hooked up to the (LAN slots?) on the motherboard.After a lightning strike, where there was once 2 yellow lights is now gone.Question is what needs to be replaced because the slots are on the mobo itself.
View 5 Replies
View Related
Dec 27, 2011
My wi fi strengh is good the only thing that shows up is a google page but unable to access the Internet at all.
View 1 Replies
View Related
Jul 20, 2012
ethernet link light is green(blinking), but i am unable to access the network
View 2 Replies
View Related
Jun 1, 2011
It is a period of time, of some weeks, since my laptop is unable to access the internet. It succesfully connects to a wireless network, I can see the name of it, but after connecting my laptop is displaying "Unidentified network", below the network name. Also, I don't have Internet access. In the task bar, my wireless icon has an exclamation mark, in a yellow triangle. I have tried to connect with another laptop at a wireless network my laptop can't connect and it worked for the other laptop. So, the problem is with my laptop, not with the network.
[code]....
View 13 Replies
View Related
Sep 30, 2012
After I changed the router password today, I am not able to access the Internet through my machine. Seeing the 'Unidentified netwrok, access to local only'. However, other people connected to the same network are using Internet
View 14 Replies
View Related
Feb 26, 2011
Unable to access webpages and sometimes internet.I will be on my laptop which is the main computer I use (I usually use it wirelessly although I'm having the same problem now, even when I'm hardwired) and suddenly I can't access some or all websites. This isn't just normal dropping for a few seconds at a time, this can last for hours sometimes. Meanwhile, the desktop computer which is directly connected, doesn't have any problems at all.
View 7 Replies
View Related
Jan 23, 2011
I have a home network of 3 cmputers. DHCP from router. 1 computer is not getting address. But if I assign it one, with same gateway and dns(not a duplicate ip of others), it can ping internally, and outside. I can do tracert to 8.8.8.8 and ping it (google DNS). But I can't get to internet. So - i can get out, but nothing coming in. I have checked firewall.
View 4 Replies
View Related
Aug 21, 2012
I seem to suddenly be completely unable to access the internet on my desktop computer.
View 14 Replies
View Related
Jul 23, 2012
I am able to connect to TPlink router through my pc but unable to access internet.The router is unable to detect dynamic ip.
View 1 Replies
View Related
Mar 24, 2013
I have a new Windows 7 laptop that is replacing an older XP machine that has successfully operated for a number of years with internet connection sharing from an XP desktop host computer. I am unable to set up the new machine to access the internet. The SysInfo data for the new computer is:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz, x64 Family 6 Model 42
[Code].....
The client has its IP address set automatically by the HOMENET wireless router, along with a manually set gateway address to route internet signals through the host computer rather through the router. I am new to Windows 7 and have not been able to set up the client to see or share files between the host and client when connected by wireless. When connected by a LAN connection to the router, I can see both computers and share files between them, but have not been able to connect to the internet. The Win 7 machine can connect directly to RESNET and access the internet that way but the incoming signal averages about 45% which is far below the level needed for acceptable use.
View 6 Replies
View Related
Dec 22, 2012
Have completed a Power Cycle.The affected machine is a HP Elite m9150F desktop. The symptoms include the following:
- neither the LAN connection or the wireless connction will access the internet through Internet Explorer
- microsoft email will not send and recieve
- Steam will not connect
- Norton 360 will connect to live update and download
- taskbar icon shows LAN connection is OK
- When I open Network and Sharing, the network map shows this pc is connected to internet through named network.
- Local Area Connection Status show 197,816 bytes sent and 311,088 recieved.
We have 2 laptops connected to the same wireless network working perfectly. There is also another desktop (Dell 8400) with a LAN connection to the router working perfectly. The affected pc (HP m9150f) is also connected to router with a LAN connection. The D-link Dir-615 wireless router is connected to a Shaw Motorolla modem model SB5102. The HP m9150f stopped connecting a few days ago, other than that, it worked fine.how I managed to get 4 computers running on a network in the first place..
View 19 Replies
View Related
Oct 23, 2011
I have no admin privileges or access to the router, I have contacted support and they've tried various fixes on their end and just told me it must be a problem on my side. the network registers a mac address under your account name and then assigns an ip.My problem is that my comouter connects to the network fine, and tells me I have internet access, but I can't actually access the internet when I try. I'm definitely connected to the network as i can access the ask4 page that allows me to register a new device, which i access with an ip address of 10.142.0.1 so I'm guessing that's stored locally somewhere on the network. I have tried internet explorer, FireFox and chrome, as well as connecting through game portals and none of them are able to access the internet.
IE gives an error that it says can't be fixed as its an error with the server and Chrome gives error 101 (net::ERR_CONNECTION_RESET). I've tried various fixes, some of which have worked temporarily. After trying most of them I've had internet access that has lasted between 5 minutes and a few hours, but the problem has always returned and the same fix that worked first time hasn't always worked again. I have an xbox that I connect to the same network port in the wall and that accesses the internet perfectly. My computer has 2 Ethernet ports and both have the same problem.
My network adapters are 2 NVIDIA nforce networking controllers (drivers are up to date)When the problem started I was on Windows vista, but I've upgraded to Windows 7 64 bit as an attempt to fix it.I've tried different Ethernet cables, connecting both ports, uninstalling my network adapter drivers, disabling and re-enabling them, resetting my IE settings, disabling and uninstalling my AntiVirus,connecting through an Ethernet switch and disconnecting and reconnecting the cable.
View 1 Replies
View Related
Oct 11, 2012
My laptop says i am connected to the netgear but i am unable to access the internet-
View 1 Replies
View Related
Sep 26, 2012
I am trying to connect internet through Ethernet LAN .But I am unable to access internet. It says unidentified network with limited connectivity or local only access. But the same connection is working fine on other laptop. I checked the device manager and every looks working fine.In my ipconfig /all details, my Eternet LAN physical address shows all zeroes and has no default gateway address .Also the DNS servers address shows some alphabets instead of numbers.
View 14 Replies
View Related
Sep 25, 2011
connectig two computers into one modem
View 2 Replies
View Related
Oct 3, 2011
For the past weeks, I've been experiencing NOT to able to 'access' Home Page on daily basis. It occurs exactly 'once a day,' often early morning but sometime even in the middle of night. For this to resolve, I need to unplug a black cable connecting to Router and plug back in to 're-start' Internet connection. This pattern happens after having replaced a brand new modem and router, saying a Modem has an issue diagosed through the phone of my ISP.
With an older modem, however this, .... 'disconnection once a day' never occured. The tech guy told me 'signal' is OK, but there are 'too many computers' in my household. However, my ISP, Comcast allows us to use 5 different PCs, then the tech. guy's diagnose did not correspond to this at all.
As to 'multiple PCs,' we, the family never use more than 3 PCs/Internet at a time. Most of time, we use only two PCs for surfing and e-mailing/photoes. Two other PCs are a sort of 'back-up' puposes ONLY.
View 3 Replies
View Related
Jan 28, 2012
My network includes *8 port unmanageble switch and a ASA 5510 firewall. There are two internet lease line from two different ISP which are end on switch. Through switch it goes to firewall. This network was working fine. Now we hired a new Internet connection from another ISP. When i tried to connect this 3rd line to my switch , all network goes down.
View 1 Replies
View Related
May 18, 2011
I have an SF 300-08 switch with three V-LANs assigned to it. One is dedicated to the management of the device and the others are development boxes.
Right now, to access the switch, I have to go into the TCP/IP properties and assign a subnet within VLAN1 (subnet linked to the management interface). Then to access the interent, I simply remove the settings, as I have another VLAN linked to a subnet from my router.
Is there a way to configure the switch that allows the ability to access both without configuring the TCP/IP settings to be on the other subnet? I do not think so, but it is worth a try.
View 2 Replies
View Related
Mar 19, 2013
I have an ASA 5505 which is unable to acces the internet, even when reloading just the basic config.If i setup my laptop with the outside ip or another ip in the subnet, it does work.
[code]....
View 2 Replies
View Related
Feb 3, 2013
Lost connection to Internet though router appears normal. Belkin router, MacBook.
View 1 Replies
View Related
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
View 4 Replies
View Related
Jun 23, 2011
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
[code]...
View 1 Replies
View Related
Mar 29, 2012
It is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies
View Related
