WRT120N Can't Connect To Admin Console After Reset

Jan 1, 2013

I reset my WRT120N and after rebooting i entered user name :admin /password:admin as usual but it refused my access.

View 2 Replies


ADVERTISEMENT

WRT120N Can't Connect To Admin Console

May 30, 2012

I was trying to get into my router to give it a reboot yesterday, but was unable to get into the console. I used the username/password I've used for over a year (it was also auto saved) but it would not let me in. I went through all the steps to do a hard reset/restore default settings and it wouldn't let me. I had to access the boot loader to reload firmware, and that worked out just fine.

Now, I still cannot get access to the administration console with the default username (blank) and password (admin). I've tried moving my PC to ports 1-4 and none work.

I was about to give up on the router but I tried connecting from my iPhone and everything works just fine. I was even able to change my SSID and WPA key again.

Would this be a hardware issue, or could there be something in Windows 7 that's affecting it? I have disabled the windows firewall and AVG and still can't get any access from either Firefox or IE.

A couple of times I was able to get onto the first page of the console through IE, but if i tried clicking anything else it would ask for the username/password again and not connect. Now it won't even let me in once.

View 6 Replies View Related

D-Link DIR-825 :: Can't Seem To Login Into The Admin Console

Mar 12, 2013

I wanted to update the F/w on my rev b dir 825, but unable to load the login console for admin, I haven't changed anything and the router was still on 2.07NA f/w

View 1 Replies View Related

Cisco Firewall :: ASA5510 - Admin Console

Sep 4, 2011

Our main ASA5510 is set up to failover to a second 5510, and is using the management port for that purpose. All of the other LAN ports are in use.
 
Currently we can manage the ASA using ASDM5.2 from and device on the LAN.
 
We are now going through PCI Compliance, and one of the vunerability scans has picked up the fact that the firewall appears to accept connections on SSL v2. However, if I try to set SSL to use v3 or TLS v1 only (as we don't use webVPN), I get a message that I will no longer be able to use ASDM to manage the firewall as changing to SSL v3 will 'prevent ASDM from establishing a secure connection with the ASA'
 
So does this mean that the ASA does use / accept SSL v2? The help files say that it will accept 'hellos' in v2 but will then try to negotiate to SSLv3 or TLS v1. It doesn't give more details about what happens next, but I would have assumed that if it can't negotiate to one of the later protocols it will drop the connection - is this correct? If that's the case I may be able to get PCI to accept it.
 
However, if this is not acceptiable and I have to switch to SSL v3, what options do I now have of administering the ASA through a GUI?

View 1 Replies View Related

Cisco Wireless :: WAP2000 Admin Console Not Accessible?

Feb 13, 2011

I'm having an issue with our WAP2000 access point.  I had to reset the access point and now I can't access the admin console.  I've set a static IP address just as I did when I first set it up. Now when I browse to the 192.168.1.245 in my browser it just displays an Authentication error. 

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Admin Console / No Response

Aug 29, 2011

I am having intermittent problems with wireless connectivity to this router.  It stops responding to requests completely but existing connections continue to function. 

The hardwired connections also are functional but I cannot get to the admin console to see what is going on. The router is currently not being used to connect to the outside world.  When it was before this situation still existed.  I am using firmware version V2.0.1.3

View 1 Replies View Related

Cisco Routers :: WRVS4400N - Unable To Access Admin Console

Jan 18, 2013

Although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
 
Apart from the last time I tried to use a Linksys product. I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
 
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
 
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
 
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
 
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason.

View 3 Replies View Related

Linksys Wireless Router :: WRT120N - Can't Access Admin Panel From Other Computer

Dec 16, 2011

Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.

View 5 Replies View Related

Linksys Wireless Router :: WRT120N Can't Access Web Based Admin Screen From Firefox 7.0.1

Oct 29, 2011

I have a WRT120N with Firmware 1.0.06..First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1.  The password prompt appears but won't proceed from there.Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection.  On mouse roll over Windows 7 Pro gives the error message 'no internet access'.  This problem appears to resolve itself after several minutes or straight away if the router is powercycled.  During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert. [code]

View 8 Replies View Related

Cisco Switches :: SF300-24P Console And Factory Reset

Jan 10, 2012

My company just bought a SF300-24P, got it configured without much issue.  Today I try to get into it and I can't.  Tried via HTTP and console and nothing happens.  Decided to try to reset it using the button on the front.  Using the documentation, I held down the button for over 10 seconds.  Didn't reset to factory defaults, tried again and rebooted it, still nothing.  What I am I doing wrong. Also nothing comes up on console window and I'm using the setting for Hyper Terminal that the documentation says I should use.

View 5 Replies View Related

Security / Firewalls :: How To Reset Admin Password On Tumbleweed

Jan 12, 2012

How to reset the admin password on a tumbleweed appliance. My company just purchased a building, and the previous tenant left behind a bunch of equipment.

View 4 Replies View Related

Belkin Routers :: F6D4230-4 V1 - How To Reset Admin Password

Feb 1, 2013

i forgot my admin password and i want to know if there is a way to retrieve or reset it. I have the enhanced wireless router model F6D4230-4 V1

View 3 Replies View Related

Cisco :: Particular LAP's On WLC 4404 Reset To Admin Status - Disable

Feb 13, 2012

We have around 70 1131's on our 4404 WLC and there are around 5 of them which always seem to reset themselves to Admin Status = Disable.  They are in H-REAP mode as are all the other AP's, but for some reason I have to keep going in and setting the Admin Status of the AP to Enable.  This has been occuring across different firmaware versions since 4, we are currently running 7.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 3355 / Reset / Recover ISE Admin-CLI Password

Jul 30, 2012

I have to reset/recover admin-CLI password. I had posed the question in [URL]Now as per the CLI-admin password recovery procedure at [URL] I have inserted DVD in the hardware appliance, but I don't see any prompt with these options:

"Welcome to Cisco Identity Services Engine - ISE 3355
  #
To boot from hard disk press <Enter>
  #
Available boot options: "
 
I  just see login prompt ( and of course, I cannot login because I don't  know the password). I am using serial console connection to the  appliance.

View 2 Replies View Related

Cisco Routers :: RV016 Admin Password Doesn't Reset

Dec 6, 2012

I've used many Cisco RV042/082 and have just purchased a couple previously used RV016 units.The first think I do is hold down the "reset" switch until the units reset to factory and then proceed programming them - EXCEPT this last unit doesn't seem to be resetting the administrative password.The unit has reset so that it is 192.168.1.1 and is handing out IP assignments via DHCP in that range.
 
When I point my browser (IE9) to the web page http://192.168.1.1 I am prompted to log on.  I enter 'admin' for user name and attempt to enter the same for the password.  The browser returns me to the logon prompt and after a few apparently failed attempts it displays a 401 error Unauthorized page.
 
In desperation I have tried:

admin / admin
/ admin
admin / password
/ password
admin / rv016
 
and simply admin with a blank password.Isn't the admin password supposed to reset with everything else?If not - how can I - if it is, then what would be preventing the admin password from resetting - is there an internal jumper or something I could try?  I don't care about preserving any setting obviously I just want access to the admin interface.

View 2 Replies View Related

Linksys Wireless Router :: How To Reset Cisco Wrt120n

May 10, 2012

How to reset the linksys cisco wrt120n router.

View 4 Replies View Related

Linksys Wireless Router :: Wrt120n - Have To Reset Every Day To Get Connectivity

Jan 7, 2012

I have a wrt120n router.  It will not give IP addresses after 24 hours of usage.  Having to reset the router to be able to get connectivity is getting to be very aggravating.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Clear Or Reset WRT120N To Re-install

Dec 28, 2011

I have this router that wouldn't connect because I lost the password.  I held the reset button for 90 seconds and it neverwould reset.

View 4 Replies View Related

Linksys Wireless Router :: WRT120N Just Won't Reset To Original Form

Aug 15, 2009

I'm trying to reset this router back to its original form (pass: admin (?)) but the ''hold the reset button for 45 seconds and unplug for 30 seconds'' just doesn't seem to work. When I try to install with the CD it just keeps saying that I have to reset it.   how do you reset the WRT120N? Are the lights suppose to blink to indicate that you're done holding the reset bottom?

View 9 Replies View Related

Linksys Wireless Router :: Can Reset Button Be Replaced On WRT120N

Dec 26, 2011

I can not get online, after a "Verizon" outage with my router connected, the Reset Button will not move. Can it be replaced? Or should I scrap the unit?  

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Reset To Factory Defaults

Oct 26, 2009

We've lost our WRT120N's administrator password and are trying to reset it to factory defaults.One peculiar thing that we have noticed is that the router has an IP of 192.168.106.1 rather than the default of 192.168.1.1 (this is verified by the default gateway, as well as a login prompt when 192.168.106.1 is put into a browser).Things we've tried to do to reset the router:

1) Press and hold the reset button at the back of the router for 30 seconds

2) Press and hold the reset button at the back of the router for 60 seconds
 
Interestingly, doing either of these things seemed to have no effect on the status lights.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Cannot Reset Password And Hacked Internet

May 28, 2012

I cant remember my password and i lost my cd installer.  someone hacked my internet line<  I want to change my password but cannot get through the router mainframe.How can I access my router?

View 3 Replies View Related

Linksys Wireless Router :: WRT120N Pressing Reset Upon Turn On And Reinstall Firmware On Bootloader

Aug 14, 2011

I have WRT120N, i recently updated the firmware. 1.0.06. only my bad is i done it wireless. so its basically interrupted.I have tried, hard reset and power cycle and reinstall the firmware but still the problem occurs, this time its wired.it happens intermittently. i have tried pressing reset upon turn on and reinstall firmware on the bootloader. it stablized for a while but then disconnects and blinking stikes again. 

View 2 Replies View Related

Cisco Firewall :: ASA 5512-X Can't Connect To Console

Apr 10, 2013

I'm trying to access our ASA 5512-X via the Management port, but the address https://192.168.1.1/admin can't be displayed.

View 35 Replies View Related

Cisco LAN :: AS5350 Can't Connect With Console Port

Jun 22, 2012

I had a Cisco AS5350 , and it works correctly through the year. but now I could not conncet to it even with console cable .my windows is server 2008 ,COM1,9600, but in hyper terminal I couldnt see anything from cisco,even I have change my console cable , but it still doesnt work.

View 11 Replies View Related

Cisco Wireless :: AIR-LAP 1522 To Connect To Console Port

Sep 5, 2012

They brought me a LAP1522 referring that it is not working properly. I am trying to connect to console port but the problem is that I only get log messages but I cannot edit something or type any commands. I have attached the log messages if you can catch something from there. Ignore the messages about not finding controller because the AP has been removed from the real network to my office.

View 14 Replies View Related

D-Link DIR-655 :: Can't Connect To Admin Page

Feb 19, 2013

I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...

View 1 Replies View Related

Cabling / Cards :: Connect To Cisco Console With / Without PC Serial Port?

Jan 5, 2012

I need to connect to the console port on a cisco firewall, an rj-45 connector. The cable is a rj-45 at one end and a serial on the other. My PC has no serial port and I am unable to use the provided cable to connect to the firewall appliance. Is there software that can allow serial over my PC's Ethernet? I really don't have time to order a serial card for my PC.

View 1 Replies View Related

Cisco WAN :: SG500-28-K9-G5 Weird Symbols When Trying To Connect Through Console Port

Feb 18, 2013

I have a SG500-28-K9-G5 at work and I'm tyring to connect to it trough the console port via Putty and get wierd symbols: When I press any button I see alot of wierd symbols comming up, for example if I press shift+6 or Enter (or anything). [code]

View 2 Replies View Related

Cisco Switching/Routing :: 2801 Cannot Connect With Console Cable

Jun 12, 2013

I cannot connect to the Cisco 2801 with console cable. what to do ?

View 1 Replies View Related

Cisco Wireless :: Cannot Connect To Wlc4402 Via Console - Hardware Failure?

Jun 21, 2007

I made a lot of tests during some days with a wlc4402 and everything was ok.
 
One day when I tried to reset the system I had a lot of errors (see attach) and could not go on. After changing the image the following output appeared: "RAM Disk Image Integrity Check Failed (Bad Magic Number) Hanging". Now I have no response from the controller.

View 4 Replies View Related

Cisco Firewall :: 5510 Can't Ping Device IP Or Connect Via Console

Jun 26, 2012

I was trying to add an Access Rule then Nat rule, they applied ok then i lost connection to my ASA 5510.I cant ping device ip, i cant connect via console , only can acess via Management port, i have pasted Running config. [code]

View 4 Replies View Related

Cisco Switching/Routing :: Can't Connect To Console Switch Sge2010

Mar 18, 2013

I can't connect to the console of switch cisco sge2010, I tried several console cables and none worked for me, I followed step by step manuals and nothing.
 
Also try the web  192.168.1.254 according to the manual but when I connect from the laptop to do ping to the switch doesnt work.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved