Westell 7501 Router - Adding Files To UPnP Media Drive
Sep 13, 2012
I recently set up a an external hard drive as a UPnP media server through my router. My media devices and my computer can see the drive fine. My question is, what is the best way to add files to the drive? It seems like a hassle to plug it into a computer directly every time I want to add more files, and FTP is kind of clunky. Is there any sort of software I can put on the drive or any better way to drop files onto it?I'm using a Seagate 2TB USB Drive formatted as FAT32 connected to a lemonade-equipped Westell 7501 router. I understand that it may be that I'm trying to get too high tech with my $7 router, but it seems that there should be a better solution.
I just installed this router and connected the hard drive (Western Digital 1TB) which worked fine at first. When I moved some movie files to another folder they lost all of their data. The file names are still present, but all the media files show zero bytes and are no longer usable. Is there anyway to get these files back? I have been digitizing all our movies to the tune of about 90GB. What could be going on here? I disconnected the HD from the router and plugged directly into the laptop. Still shows the file names, but each file is still at zero bytes. Not a cool way to have a media server for your house!
Is there support for album art or video thumbnails in the UPNP media server on the E3000? I've tried adding jpg files with the same name as the video file, but I see nothing in the client. I've also tried naming them 'folder.jpg' and 'cover.jpg' but still get nothing. If this isn't supported is there any plan to add support in the future?
have a dynex wired router set up to use xbox live. now want to add adsl westell wireless router so we can use ipod touch & kindle.dont want to disturb the xbox set up.
I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?
I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?
I posted this on a previous thread along with another question, but since I marked that as answered I'll post it here so people will see it.Is there any way I can use UPnP WITHOUT having to have the videos I want to stream in my WMP library? Windows Media Player has always been a pain for me, from my videos not showing up in the library when I know they're there to not being able to switch audio streams in a video. (If VLC Media Player or iTunes had a UPnP library.
Today I had to reset the router completely to factory default, if I was adding services to the forwarding or UpNp service management, suddenly it stopped adding the new ones.Now after starting all over it's having the same behaviour, see below my services, normally you can have 30 rules in this list but I cannot add new ones now.
Now I want to insert a new service IMAPS for port 993 so I go to service management.Then press "add to list" see below for result.It is there, then press OK and the screen closes, now if I choose a service from the list, it is not there !!
i sold off my e4200 & brought a e4500 .The e4200 has had a 2 TB W.D external drive attached ,i stream movies to a sat pvr in the .ts format .The problem is i set the e4500 up & it deleted my .ts files not once but 3 times.when i brought the e4500 i did roll the firmware back to the classic non cloud firmware.the third time i had turned the router off & once swtiched back on my files were gone .should i safely remove the drive from the set up ? what if i have a power failure?
EA 4500 seems to work fine. Have a Seagate 3 TB HD connecfed to USB. Have LG Smart box connected to EA4500 by Cat5e cable. HD hard drive contents shows and accesses ok on PC via wireless. Smart box showed HD but only media files in "documents" directory, did not show "TV" & "Movies" directories.
Reset Router Media Server Access with "TV" & "Movies" directories - presto LG smarbow showed directories now and worked fine. This morning will no longer show "TV" & "Movies" directories on Smart box. Have tried deleting and resetting Router Media Server Access with "TV" & "Movies" directories several times, no luck.
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
I decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
Here's what I did - whether it's pertinent, who knows:
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
3) On the Media Server page of the router config, add your media sources.
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
So, one of several things is happening here.
1) There are certain files the media server cannot properly parse, and it's crashing the services that run it. 2) Something is corrupting the media database files which then prevents it from showing up. 3) There's a maximum number of files or file size that your collection can be.
If only there was a syslog we could get to on the stock firmware... Linksys.
For the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
I moved to Comcast internet yesterday (from 3Mbps DSL), and the E4200 seems to be working well (although somewhere along the way it decided to delete all the files on the NAS drive...an issue for another day). On my laptops and wired PCs I'm now seeing 15-20Mbps down, and 4Mbps up. However, when I connect with my iPhone 3GS, I only see about 7.5Mbps down, and 4Mbps up using online speedtests. I have tried messing with the router settings and resetting all the network settings on the iPhone but nothing changes. I know my iPhone can handle more, because I get 15Mbps down when I visit family (they have a Netgear N300). I can only conclude that my E4200 is the cause.
If Anonymous Disk Access is selected, read-only files cannot be deleted; nor can the file attributes be changed. This is true even if one attempts to connect as an administrator. Unchecking Anonymous Disk Access and logging on as an administrator fixed this problem for me, but I'd think there are 2 issues.
1. Anonymous Disk Access should allow deletion of ANY files. I would expect this to be a "wide open" setting.
2. If Anonymous Disk Access is selected, a valid login should take precedence.
I recently copied files to my hard drive that was connected directly to my computer (via USB).When I connected the disk back to E3000 the files were missing. I connected it back to PC directly and verified the files are there.My PC runs Windows 7 Enterprise.Why can't I see files copied via local connection when I connect the disk to E3000.I carefully compared the permissions with files that I can see just fine and there is no difference - same permissions, same owner.I also get all kinds of permission errors when I try to delete a files from the network drive.
I correct in understanding that when an external hd is connected to the e3000 via usb, that i can read and write to it, but i cannot delete files from the external drive? i have been trying to figure this out for a while and cannot delete files after i write them.
I have mapped the attached hard drive to my EA4500 on my PC and can access folders and files on my LAN PC. However, when I come in through the Internet via an iOS device, I can see folders but when I try to enter the folder, all I get is a message that displays "|Folder|Enter Into Folder|Select|. There is no click-through capability other than "Return to Upper Folder", which takes me back to folders.
I bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
I have a Buffalo LS-XLBB2 Linkstation NAS streaming wirelessly to a Sony SMP-N200 media player. For some reason, whenever I add or edit a file on the NAS via my PC the file list is not updating on the media player.I have the database set to refresh at 20 minute intervals, but some files and folders never show up and some do after a few days. There are no problems with file type as I can play them back fine when I connect a USB drive to the media player, it just seems like the media player isn't getting a copy of the new database. When I manually refresh the database, it makes matters worse. All of the files disappear on the media player list, except for one folder (the same folder every time). The original file list comes back again if I restart the NAS and media player, but the new files are still not listed. I can access the new files on the NAS fine with my PC or laptop, so the files are there, the media player just isn't updating the file list.
Things I've tried:
- Checking that both the NAS and media player firmware is up to date
- Retarting both units
- Resetting both units to default
- Trying different files types (the first file has never shown up, the second file showed up in the list 5 days later)
- Changing the database refresh intervals on the NAS
- Manually refreshing/initialising the NAS database
The main advice on other forums seems to be to set up a media server on the PC and stream though that, but the whole idea of getting the NAS was so that I could watch videos on my TV without having to have the PC on all the time.
Model : TL-WDR3600 Hardware Version : V1 Firmware Version : 3.13.23 Build 120820 Rel.73549n ISP : Cable TV provider
It seems there is a bug with TL-WDR3600. As it can be seen in the following image, the UPnP is off:But my firewall on the computer is reporting flood of packets originating from the router (it's the routers MAC address and IP address):I don't know what ETH type packet is, 0026 might be hex (38 decimal as seen in the raw log). But port 1900 is definitely UPnP.At the router, the wireless switch is off, as well as all other options for sharing etc. This computer is the only one connected to the router. The router has been reset several times.
Region : UnitedKingdom Model : TL-WR1043ND Hardware Version : v1 Firmware Version : 3.13.12 Build 120405 Rel.33996n
I have set up the router with a USB FAT32 Stick 8gb shared six folders with about 5gb of music inside the server only streams the first folder to the network and inside that folder all the MP3 files and another 2 sub folders but not others. Whats the reason for this is there a limit to the amount of files that can be shared if so this should be made clear in your
Region : Romania Model : TL-WR1043ND Hardware Version : V1 Firmware Version : ISP :
The Media Server feature is quite nice to have but the fact that it is limited to 100 files is a joke. I have a 2TB drive pugged into this router's USB port with hundreds of video files and even more mp3s. Is there any chance that in a future firmware this limit to be removed or at least increased to say 1000?
I cannot for the life of me get the license file to upload. I purchased 25 more licenses. Download and install tftp and put the license file in C:Program FilesTftpd64 But no matter what path I put in Mangagment>Software Activation>Commands, it fails.
Region : Spain Model : TL-WDR3600 Hardware Version : V1 Firmware Version : 3.13.26 Build 130129 Rel.59449n ISP :
I've recently bought the TP-LINK WDR3600 and am very happy with it. I'm using its media server feature so I can watch movies on my TV through DLNA, but have found a problem: the MP4 files are not shown. All the other files work perfectly (AVI, MKV), but the MP4 files are not shown in Windows Media Player or LG Smart TV. I assume the Media Server software simply does not include this kind of files when scanning. Is there any way of accessing the media server configuration file and "enable" MP4 files?
We have a network drive (drive with Rj45 port) and it is shared by many computers. Frequently we are facing a problem while opening a file and we get the error message "The file is opened by another user" and can open only as ready only.
How can I find who has opened the file in the network drive?
Region : CzechRepublic Model : TL-WDR3600 Hardware Version : V1 Firmware Version : 3.13.26 Build 130129 Rel.59449n ISP :
1. On my laptop in windows vista media player I cant see any shared media of media server TP-WDR3600: screen.jpg
2. My samsung tv shows all three shared folders of media server. When I try to play any Mp3 and avi files it says unsuported file format. In folder with jpg photos it shows nothing. I can see and play anything from my laptop media server on TV.
Region : Germany Model : TL-WDR4300 Hardware Version : V1 Firmware Version : latest ISP : Kabel BW Germany
I have HDD (Toshiba 500GB) connected to router by USB and started media sharing. (The HDD is started on USB Sharing) Samsung LED UE40D7090 (2011 model) is successfully connected to network,. I can see TP-Link on my LED network but it appears with blue exclamation mark and if i try to access the released folders with files (i can see the files) with TV shows me a message "unknown file formatt" and i can�t access it. On the PC - I can access video, pictures and mp3 content on USB HDD, problem just with TV. If i connect the HDD direct to TV , TV can play all files.
I got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
This is troubling and I don't know why it is happening. For some odd reason files seemingly related to my DIR-655 are being put in the root directory of my hard drive on my Power Mac G5 running Leopard 10.5.8. Two preference files and a folder named ''D-Link'' and another folder named ''Shareport.''Why is this happening? I have given D-Link/DIR-655 no access to my hard drive.Furthermore, why this is only happening on that machine while my MacBook Pro running Snow Leopard 10.6.7 is not being ''invaded.''
Region : United States Model : TL-WR1043ND Hardware Version : v1 Firmware Version : 3.13.12 Build 120405 Rel.33996n ISP : Charter.net
Everything is set up in the router software. The tuner detects the USB drive as a UPnP device, shows the directories I've set up for media share. If I select an AAC or FLAC file to play, the tuner loads it and plays. If I select an MP3 file, it loads, shows it as 100% buffered -- and hangs. Every time. The other devices on the router's network (wired desktop, wireless laptop, wireless tablet) can load and play the MP3s along with the other file types from the same USB-connected drive. That's why I figure the router isn't causing the problem.
