Wireless :: Trying To Connect Multiple Wireless Networks?
May 12, 2011
I manage a network using Windows Server 2008 r2 that connects to the Internet (ISP) through a wireless radio antenna. We have three other locations that also connect to the same ISP through wireless radio antennas on the roof of each building. Those locations are windows XP machines. Each location is separated by more than 1,000 ft and do not have line of sight to each other. I'm wanting the XP machines to be able to logon to the domain of the server and access shared files
View 1 Replies
ADVERTISEMENT
Nov 19, 2012
My neighbor and I were wondering if it is possible to combine our respective internet connections in order to gain a faster connection overall. What would be ideal would to have a wireless router in one of our houses, that is simultaneously connected to both of our ADSL routers, and to which both of us are able to connect. Do I need a specific type of router?
View 5 Replies
View Related
Feb 3, 2013
I currently have an 867vae router and a 1131ag ap setup with 2 vlans and 2 ssid's. I am in the process of baby proofing the house and would like to use the cisco plsk400 homeplug system to relocate my wap. I use 2 networks to seperate and filter the kids internet traffic from my own. It also allows me to shut the kids vlan when they shouldnt be on the internet.
As far as i can tell the plsk400 homeplug doesnt support 802.1q.... so is there any way i can keep the seperate networks/SSID's and the abilty to filter and turn off one of them at will without a trunked link to the router?
View 2 Replies
View Related
Feb 11, 2011
setting up networks with multiple locations and multiple wireless points.For example: My sisters' home has here modem in her main computer room, it has a Belkin router hooked to the modem. Then a line goes from there to my nephew's room where I tried to expand their network by adding another router. I really just wanted an access point, but they don't seem to sell these as much as they used to. Anyway, I had it working, but it was two different networks, NETWORK1 and NETWORK2. So they had to swap networks when moving around the house. what would be the best hardware setup to provide both sides of the house with some Hardwired access as well as wifi access? Right now, we have two routers, a DIR615 (or something like that) and a Cisco E1000, and again hardwire going from the main computer room to my nephew's room.Also, in my house, I have lots of stuff... I have an Actiontec Router from FIOS, feeding a small hub as well as a switch in my main room. Which then feeds a Ps3, Wii, laptop, Denon reciever, and Access Point... and also feeds my Apple TimeCapsule, which also feeds my printer. My wireless devices range from cameras, iphones/ipads, and a wifi unit (I forget what it's called, but it connects my DVR wirelessly to my network, and the DVR itself doesn't have wifi).
my question about my setup is, should everything be on one network... as in let the ActionTec handle most of the duties and use switchers and accesspoints to extend the network. Should everything be on the same wireless network and channels? Like if I used my access point to extend, do I want the same settings as my main wireless router, and would that be the same for the Apple Airport Extreme?Also, does having all these wireless networks going create any kind of hinderance on my performance. For example, the PS3 has some sort of wifi in it... it produces a SSID, but I never connect to it. Should I make sure that's off? And in my main room, should I go with just the AirPort extreme over using it and the Wireless Access point.
View 1 Replies
View Related
Nov 3, 2011
i cannot connect to the available network even the homegroup.i have do troubleshoot but it cannot fix.and tell that i have problem with my adapter network..
View 1 Replies
View Related
May 7, 2012
I have a RTL8187 wireless adapter. First of all, it did not come with windows 7 driver so it was a pain finding one. I found the latest ones though, but it seems it doesnt work (no networks will show). I have to choose the pretty outdated drivers, and it cant connect to WPA, WPA2, and hell, even open networks.
View 6 Replies
View Related
Feb 14, 2012
I am having trouble setting up two networks.Basically, i want one 'private' network and one public network. The problem is, the private network can't access the internet.(Network 2)
Network 1(Public) works fine as i don't want them to access Network 2.Here's how it is setup.
Internet
|
Router/Modem (Network 1)
|
Server NIC1
Server NIC2
|
Switch - (Network 2)
Network 1 can access the internet and shared files on the server.
Network 2 can access Shared files on the server (which is what i want) but cannot access the internet.
Router/modem IP is 10.10.1.254 subnet 255.255.255.0
Server NIC 1 IP is 10.10.1.252 subnet 255.255.255.0
Server NIC 2 IP is 10.10.1.251 subnet 255.255.255.0
How can i get computers in Network 2 to access internet?
View 5 Replies
View Related
Aug 30, 2011
Explain the risks of not using multiple networks on a 300 host LAN
View 1 Replies
View Related
Jul 25, 2012
have a dell inspiron 1545 with windows vista. Sometimes at coffee shops I cannot connect to the internet. It says that I have local access only. This also has happened when I use my hardwire internet connection. Then at times it does work on the same network. It is not a network problem as I can connect with my iphone or other devices.
View 14 Replies
View Related
Jul 19, 2012
I'm using Windows 7, and when I lived at my house I was able to connect to wireless networks without a problem. I just moved today into my brother's old apartment and for some reason I can't connect to his wireless network. I can see it along with a number of other wireless networks, but I'm unable to connect to any of them. When I attempt to connect to a network absolutely nothing happens. Typically at the bottom right corner of my screen something will pop up saying it's trying to connect, but for some reason that isn't popping up. I know it's not a problem with the router because I'm unable to connect to any of the networks, and I also had no trouble when I tried to connect to it with my laptop.
View 3 Replies
View Related
Aug 28, 2012
My wireless recognizes my home networks, but bounces consistently from "acquiring network" to "automatic" and never connects me to the web. Just to test it out, I installed the Belkin WiFi USB Adapter to run it as a separate wireless, and it reacts the same way.
View 4 Replies
View Related
Aug 22, 2011
I'm working off a three-year old HP notebook, dv-2000 series, running Windows 7 Professional, 32-bit.I suddenly lost wireless connectivity. I can still see wireless networks available - unsecured and secured, five-bar signals - but trying to connect to them fails. This is not a matter of connecting to the network but not having internet access, but rather being completely unable to establish any connection.Troubleshooter says Windows is unable to determine anything. It says check the access point, but I cannot connect to any network - home, starbucks, etc. I have reinstalled both network drivers (ethernet and wireless adapter).I have plugged into a wired connection and updated Windows to the most recent set of updates.I've obviously reset the machine, toggled the wireless, etc.I've reset the TCP/IP stack.I've checked that the WLAN service is running, as well as the DNS and DHCP client services. ipconfig says the wireless adapter has DHCP and Autoconfiguration enabled. Device manager says everything is working fine.
View 1 Replies
View Related
Mar 5, 2011
I haven't had internet in a couple of months until recently when I got cable broadband and a TP-Link wireless router. The setup works fine with a ADSL cable but I can't get my laptop to connect to any wireless networks including my new router. If I run a windows troubleshooting diagnostic it says I have no preferred networks. If I go to "manage wireless networks" the box is empty and if I click "add" NOTHING happens. I can see my wireless networks in the networks box on the taskbar but when I click on them nothing happens (secured or unsecured) I'm pretty sure the problem is not with the router but maybe with the adapter or the pc itself. Others can connect to the wireless network
View 5 Replies
View Related
Dec 17, 2011
I messed with some startup programs on msconfig and made sure I didn't disableanything that I didn't know much about, then it told me to restart my computerAfter restarting my laptop I couldn't find any networks at all, there are usually, around 20, and my sound didn't work. After that I tried to enable all of the ones I disabled before, but I am still getting the same problem.
View 14 Replies
View Related
Jul 29, 2012
I've formatted my computer(Windows 7 Ultimate 64bit), then I downloaded my wireless adapter driver from my manufacturer's website, installed it and tried to join my home network but it couldn't connect it(or my neighbor's network, which I could access before formatting the computer).
View 14 Replies
View Related
Apr 27, 2011
I am trying to connect to a different network, but for some reason when I click "Connect To", where it tells me to click to join another wireless network, it just shows me this: and does not show me the Wireless Networks that are available (I am not sure what it is called)
View 6 Replies
View Related
Jul 10, 2011
I'm building a desktop PC from scratch, and since up until now I've always taken this for granted with a laptop, I'm a bit confused what it is I need to connect to the internet. First of all, I live in a student residence, so up until now I was able to just use an ethernet cable, connecting the wall to my laptop to gain access to the internet service I'm paying for, an I was also able to connect to wireless networks. So my question is what do I need to buy to get the same connectivity?Do I need to buy a network card, so that I will be able to connect from the wall to my computer and gain access to the internet (not wireless), or do motherboards have that capability already these days? This is the motherboard I'm buying, and if I buy a network card, this is probably the one I'm going with. Or should I go with one that has the IEEE 802.1p, as well?
And then for the gaining access to wireless networks part. Do I just buy a router and that's it? For example, would buying just this router enable me to connect to wireless networks? Or can I just buy this PCI adapter?Would it also be possible to go from the wall directly to the router, then to the computer gain access to both the non-wireless and wireless networks?
View 7 Replies
View Related
Jan 11, 2012
I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies
View Related
May 19, 2012
We have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies
View Related
Feb 16, 2013
I am currently working on a project that needs to install a router (or just a network device) that can offer 2 or more DHCP networks. We have been searching a network device for this but haven't gotten any good news yet. Any model or device that can fulfill this requirement?
View 6 Replies
View Related
Jan 24, 2013
I have a Windows 7 Pro Desktop with an on-board Ethernet and an Axis USB To Ethernet adapter. The on board Ethernet is configured as dhcp and obtain the address 10.162.146.123 with 255.255.255.0 subnet. The Axis USB to Ethernet adapter is static ip configuration with 10.38.25.37 and 255.0.0.0 as subnet. Under the adv settings I have also another ip 11.38.25.37 with 255.0.0.0 subnet. When the Axis is communicating 10.38.0.1 network I can not access the internet using the on board Ethernet 10.162.146.123. I have to disable either one of the cards to access one network at a time.
View 3 Replies
View Related
Aug 3, 2011
How do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies
View Related
Sep 20, 2011
I currently have a hub-and-spoke VPN configuration with 6 ASA 5505's at remote sites all connected to an ASA 5510 at HQ via IPSEC lan-to-lan tunnels. My current configuration allows hosts on the remote site networks to talk to hosts on the HQ network, but not to hosts on the other remote sites.I have receieved a request to allow comminucation between the remote sites as well, with traffic all routed through the 5510 at HQ.
View 1 Replies
View Related
May 20, 2013
Im using 2 TP-Link TL-WA7510N to bridge a internet connection the connection is using a captive portal for my guests via pfsense. What i would like to do now is run a pc on the same connection without using the captive portal .So basicly i would need 1 secure network for my single pc and the one with captive portal for my guests.
View 1 Replies
View Related
Sep 6, 2012
I'm living in Australia for a few months and my accommodation does not have a phone line, so I've been using mobile broadband dongles instead. This worked fine until recently, when I abruptly became unable to access the internet. The laptop recognises the dongle and seems to connect, but the download/upload speeds are at a constant zero bytes per second (I have tried to ping Google while 'connected' but received no response). I have tried two dongles from Dodo and one from Telstra, with the same results. Initially, I assumed that this was simply due to signal strength, but each of the three dongles I have tested work fine on another laptop in the same location (I'm using one of them to post this). I have also tried using the dongles with my laptop in other locations, including the city centre, but with no success.
Also, I seem to be unable to connect to any wireless networks (e.g. McDonalds wifi) - the laptop detects the network ok, and seems to be connected, but I am unable to access any web pages etc. In the Network and Sharing Centre, the laptop is connected with the wifi network, but the wifi network does not seem to be connected to the internet. I'm unsure if this is related to the above problem, however.Like I say, everything seems to have been working fine up until about a week agoIf
View 4 Replies
View Related
Feb 11, 2012
I have suddenly started having issues recognising and connecting to a wireless network at home on my laptop. We have 2 wireless networks at home as we use an additional D-Link router through the powerlines. (DHP-W307AV PowerLine Homeplug AV Wireless N Starter Kit)I used to be able to connect to both but now I can just connect to the main wireless router. Other laptops and smart phones in the house can connect to both. I was wondering if this had anything to do with Norton 360 so I have used their removal tool to get rid of it. Unfortunately I still can't connect to the second network.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6087 Mb
Graphics Card: Intel(R) HD Graphics Family, -1276 Mb
Hard Drives: C: Total - 670401 MB, Free - 455832 MB; D: Total - 29691 MB, Free - 27474 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: avast! Antivirus, Updated and Enabled
View 10 Replies
View Related
Oct 19, 2012
I have: ASUS Netbook with Windows 7 Starter.
As of last night, I cannot connect to any of the wireless networks I use every day (my personal home network or my school's WPA2).
The signal strength is very good, but it says "Limited Access" next to the network name. Apparently "Limited" means "No" because I am not connected. Here's what happened:Lavasoft Ad-Aware was blocking a site that I needed to access. I haven't used Ad-Aware in months, and it did not even appear to be running. So uninstalled it with Add/Remove programs in the control panel. BUT, mid-way through the uninstallation, I got a blue screen and my computer restarted. When my computer booted back up, I could no longer connect to my home's wireless. I'm at school now and I cannot connect here either. Ad-aware is gone from the add/remove programs list, but there is still an Ad-Aware folder in Program Files. The folder still has a bunch of stuff in it, including adaware.exe. I dont see an uninstaller (but i havent really investigated that yet). so now i can't connect to any network. Here's What I've TriedRan troubleshooter. Useless. Turned off my netbook's wireless. turned it back on. Device manager says my Network Adapters are working fine. No yellow or red icons next to them. also tried resetting stuff with the command prompt. something about winsock and netsh. I don't know what I was doing though. just following instructions from other people on yahoo answers when i googled the problem.
View 2 Replies
View Related
May 10, 2011
So we just got a new router for our higher speed internet. The modem is an Actiontec Q1000 from Qwest. We used to live out in the middle of nowhere, so we never needed to secure our internet. Now we live close to neighbors and we need to encrypt the wireless. When I try any encryption, however, I can't connect at all. I have tried temporarily having it unlocked and I could connect without a problem. It also works fine when I'm using my Ethernet cord.
Heres my IPCONFIG.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
[code]....
View 1 Replies
View Related
Sep 13, 2012
I have an Alienware M17X-R3 and I’ve been experiencing several networking problems with it recently- most importantly that I can’t connect to any wireless network. It detects all the networks in the area, but when I select and try to connect to one nothing happens. I can still use a wired Internet connection, though. “Troubleshoot problems” or “Diagnose” just tells me that I have no preferred wireless networks. When I go to the Network and Sharing Center, the “Set up a new connection or network” button doesn’t do anything. When I go from there to “Manage Wireless Networks” the “Add” button doesn’t do anything.
I’ve tried disabling and enabling my DW1501 Wireless-N WLAN Half-Mini Card, and reinstalling the drivers. I’ve disabled the “Allow the computer to turn off this device to save power” option on all my network devices. I’ve used a system restore. I’ve run a scan with Malwarebytes and my computer had crashed by the time I looked at it again thirty or so minutes later; it had tried to restart but was unable to because there was “No bootable device”. I powered it off and started it up again and it worked fine. I also ran a Superantispyware scan that completed successfully without finding anything and immediately crashed, but restarted normally.
A few other things that may or may not be related:
-When I boot I get a message that says “Could not reconnect all network drives”
-When I booted I used to get a message from GoogleCrashHandler64.exe that said “C:Windowssystem32dbghelp.dll is either not designed to run on Windows or it contains an error.” When I went to msconfig and disabled all non-Microsoft processes under services and startup I no longer got the message.
View 15 Replies
View Related
Jan 9, 2011
Adding a second DAP-1522, They have 1 DAP-1522, they set that up useing the WAP(button on the side), This one is running in the frontroom of the house and the 2nd bridge will be running in the bedroom of the house.She has tried to click on the WAP button on both Dap-1522's and then the router to sync but thats not working, from what we can tell. I think I will need to manually config them now that a second one has been introduced.the frontroom Bridge is 192.168.0.50, but we cant find the ipaddreess for the second dap-1522 at this time. So question to all, if I can - Is there a way to identify all of the Dap-1522's on the network or anything that is connected on the network. as the DIR-655 is only showing 2 things connected?Right now I wish she would have listened too me and had her house wired for ethernet when the house was being built.
View 1 Replies
View Related
Apr 10, 2013
I am looking to create an office network with each person having internet access but on a private network. however everyone will need to be able to access a communal printer. would they be able to see it if they were all on a different subnet or would i need to set up vlans?
View 4 Replies
View Related
Jul 3, 2012
I would like to associate multiple IPv4 networks with one physical interface in the router. All those multiple networks share the same broadcast domain(VLAN 5). I am aware that it's not possible to have multiple subinterfaces in the router with the same "encapsulation dot1Q 5". Am I correct that only option here is to configure all those networks as a secondary network to router physical interface? Or are there other possibilities than secondary addresses?
View 4 Replies
View Related
May 22, 2011
I have 3 networks coming on DMZ (VPN) interface. Only one network is able to ping the DMZ interface. See below networks coming i on the DMZ.
10.132.24.0/2410.132.25.0/2410.132.26.0/24 Only the 10.132.26.0/24 netork works as it is in the same range as the DMZ interface.
allowing the other two networks to communicate. I've attched the diagram and configs for your perusal.
View 1 Replies
View Related
