I have a desktop with no internal wireless card. I purchased an AT&T air card (USBConnect Lightning for AT&T), which allows me to connect to the internet. I also purchased a netgear wg111v3 wireless adapter. I would like to connect to my Wii but can not figure it out. I also have a Belkin F5D router. I am running Windows XP.
View 2 RepliesI have a windows 7 computer and have installed a netgear wg111v3 it worked for a while but now it has stopped working.
It detects wireless networks still but cannot connect.
I’m working with a customer who has upgraded from a Sonicwall w/ PCMCIA card slot to a Cisco ASA 5505. They were using this slot with a Verizon card as an ISP failover. Obviously the ASA does not have a PCMCIA slot to reuse this aircard. However, I was wondering if there is another solution to use the existing aricard with the ASA.
View 1 Replies View RelatedI have tried a lot of drivers and even tried installing Vista 64 bit drivers (something that worked for someone in some thread), but it won't work.The adapter is recognized by the computer, but the smart wizard won't launch.
[code]...
I used the wireless adapter (Netgear - WG111v3) on my computer for weeks without any trouble at all. (At the time i installed it, I remember I found out it didn't work/didn't work well on windows 7 so I downloaded some driver or something -- Don't really remember -- and it worked fine.) Suddenly, today, it stopped working. I have tried a lot of drivers and even tried installing Vista 64 bit drivers but it won't work. The adapter is recognized by the computer, but the smart wizard won't launch.
View 6 Replies View RelatedI just recently purchased a Net Gear wireless router, I am unable to get on the internet unless I have the ethernet connected to my laptop.
View 1 Replies View Relatedi have an old Netgear MR 314 router that works like a charm for my wired connections, but whenever i try to connect wirelessly from my phone or laptop, it connects but doesn't access the internet.
View 5 Replies View RelatedI dont know how to set this Netgear router to make my internet wireless
View 1 Replies View RelatedI got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.
View 1 Replies View RelatedOut of no where today, my wireless connection has begun saying "No internet access" and I can't go anywhere online Ever since it began happening, it's been saying that for longer amounts of time. So at first it was only a few seconds, now it's been taking a minute until I re-gain internet access. I haven't installed anything or ran any executables lately, don't have any viruses, I obtain my DNS and IP addresses automatically, and a few minutes ago I installed the newest firmware update of my router and I'm still losing internet. I have a NetGear WNDR3400 router.
View 14 Replies View Relatedaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View RelatedI have finally got netgear adapter to connect to router, and its connected, but not able to access any webpages. I am not receiving any bytes back. I had to manually type in a IP address, as it was not picking it up automatically. I have other devices connected to the router (laptop, ipad, iphones) and access web easily. I have tried hard resets, and shut downs all with no avail
View 14 Replies View RelatedI have a netgear MR814 router that is not connecting to the internet. A few days ago my wireless was SO slow that I disconnected and did a powercycle (which usually works when wireless drops off now and then) but then it did not connect to the modem anymore. The ports 1, 4, wireless, and power lights are on but the internet light is off. I know it's not a modem problem because I can hardwire the modem to my laptop and get on internet. I've tried a few things suggested on this forum and elsewhere (maybe I shouldn't have messed with it?) but nothing has worked to resolve the problem. When I am connected to the router I cannot access the routerlogin and the ipconfig/release/renew shows that wireless lan media is disconnected.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 458067 MB, Free - 369650 MB; D: Total - 14607 MB, Free - 1626 MB; E: Total - 4055 MB, Free - 1103 MB;
Motherboard: Hewlett-Packard, 1693
Antivirus: avast! Antivirus, Updated and Enabled
I am using a desktop with a Netgear WG111v2 dongle to connect to my cisco linksys router.Basically my old modem died which was connected to a wireless router so we replaced it with a cisco linksys router and ever since the change ive been having difficulties connecting to internet on my desktop where as the the rest of the laptops in the house have had no problem. In the begining the desktop would always say its had limited connection the the network and such i couldnt connect to the internet but disconnecting the router several times and restarting the computer several times eventually the computer would have full internet access through the network without disconnecting at all.
A few days later the computer starting connecting to the network and gaining full internet access usually without turning of the computer and restarting it although i would disconnect from the internet every now and again for a minute or so and reconnect automatically this would happen more frequently when using Skype or msn messenger extremely frequent when using skype and especially when in a call.ive updated the driver of the wireless dongle to the latest version.my desktop is running vista while the laptops are running windows 7 and mac osx or whatever.ive also download a free version of avast and given a full scan of my computer without finding any threats.
My netgear wireless router (wgr614v9) wont reboot or let me access the internet what should i do.
View 2 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View RelatedI am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies View Relatedi have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.
View 1 Replies View RelatedI just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
View 1 Replies View RelatedWireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.
View 1 Replies View RelatedI have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies View RelatedMy Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
How do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.
View 3 Replies View RelatedEvery day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
View 1 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies View Relatedi have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?
View 3 Replies View RelatedI have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?
View 10 Replies View RelatedI have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well
View 5 Replies View RelatedI've just bought a new Samsung 3 series laptop (Windows 7 Home Premium 64 bit). I have two braodband lines at my home (1: Sky with standard Sky wireless router. 2: BT with Netgear wireless router). The Netgear router is primarily used for business but I also use it to connect with my old Dell laptop and my iPad. However I cant seem to connect with my new Samsung laptop to the Netgear router. I want to get rid of the Sky broadband line but neet to get the Netgear line working correctly first.If i turn the Netgear router off and then on again the laptop can see the router and picks up the wireless signal and connects for a few minutes before it drops off and then it can find it again. The laptop does similar with the Sky router except that the connection seems to last longer before it drops off and at least it can always see the Sky wireless signal for me to reconnect again.
View 3 Replies View RelatedMy primary home wireless is a Linksys WRT54GS Broadband Router. I have an older Netgear WGR614 Wireless Router that I would like to setup as a wireless bridge to use in another room to connect my other electronics to (i.e tv, blu-ray, Wii).
View 3 Replies View Relatedip - Comcast.....
tower card - Creatix CTX404 WLAN 802.11b.....
Router - Netgear WNR1000v2 (supplied by Comcast)
Modem - RCA - DCM 325 (Also supplied by Comcast)
Window XP Pro w/SP3
Security - WPA-PSK
I'm getting in no special order
a "validating identity" or "authorization failed" or "unable to find a certificate to log you onto the network" or "limited or no connectivity...etc..."
I have removed the check in front of the enable box in the Authorization Tab. The only difference I have noticed is that the icon in the task bar instead of a white on red X I now get a Black on yellow triangle...but still no connection...all this after a couple of days worth of **bleep**
I am trying to install the adapter for wireless however my PC (Packard Bell Imedia MC H1519) does not read the adapter. Blue light comes on but immediately turns off. Have tried adapter in another PC and light stays on.What can I do to allow my PC to accept the USB cable?
View 1 Replies View Related