Previously, I didn't have problems connecting to my office's wireless router as my laptop automatically connects to it when I turn the connection on. Then, for a few weeks, my computer could no longer connect to the said network. It really puzzles me on how this was the case when the laptops and other devices of my other colleagues can connect to the same network, so has my smartphone. When I was doing field work, I usually bring along my laptop and I found out that it had only a specific problem on my office's router since I can connect to other wireless networks. I searched over the net for any possible solutions; I rebooted the router countless times but to no avail. I made sure that I didn't get the encyrption key wrong all the time. I even tried to connect my computer directly to the router using a cable and tried to access the router interface via the web browser; but it couldn't connect. I then tried pinging it on cmd, and it only prompted a "time-out." [CODE]
I have TV set box connected to modem router supplied by ISP provider. To the same router I connected EA 4500 to which I wired connected Network Hard Disc at which I store music, photos and films, which I can not access via TV set box. If I connect Hard Disc direct to the modem router to which set box is connected, access works fine.
Whar shall I do to establish accesability of Network Hard Disc over all network ?
I am on network with administrative rights and one computer on network is not visible in ipscanner, cannot connect with remote desktop connection. Cant even connect by typing in run command (eg. \192.168.1.10c$) The computer is ON and users have logged on it many times. This same problem happens on many other computers too, and its not permanent. After few days or so, he problem is gone, and sometimes persists after a weekend, when pc is shutdown on Friday. Operating system is windows xp sp2 and there is no third party firewall on remote computers.
My PC is wireless connected to my modem, My X-Box is wired to my modem, PC detects x-box in home network, X-Box doesn't see PC when running connection test, X-Box however does connect to web. When I plug in an Ethernet Cable from my Modem to my PC the X-Box instantly detects my PC. I can't figure out how to make my x-box communicate with my PC when it's it's half wireless / half wired.
My home network, consists of a bunch of Win 7 computers and 2 XP machines. One XP machine is a netbook, it's rarely on and presents no issues.Here's the problem I'm having with the other XP machine:-My Win XP PC does not show up in the list of networked computers on any of the other machines on my home network.-But I can still access the shared folders by going to start and typing in \computer name.Win 7 will open a folder containing all the shared folders and I have no problem accessing (and modifying) any of its contents.-I also can access the PC via a VNC client set up on another machine and even have ports properly configured to access it from out of the house-I use this PC as a server to stream music to my iPhone via subsonic. No problem here either-I can access all the other computers from the XP machine in question.Since I can still get to the files this wouldn't be a big deal, except:-I can't map a network drive to the XP machine from the other PCs and I need to-I have an HTPC computer whose software can't find this XP machine because it's not there
At the company I work for, there are a few "network drives" to which employees are given access so that any mutual file stored thereon may be shared between and edited on demand. Not the best model, I know.Went to the server room a few minutes ago and found that "network drives," (P:), (L:) and (M:) seem to be invisible. Back at my workstation, I opened My Computer and saw all three on my screen.
I performed a software reboot on the MSE3310. After the reboot the MSE was no longer visible on the network. I went and consoled into the device and it was operational. I ran the msed stop and msed start commands. I got this message when it tried to load eth0.Bringing up interface eth0: e1000 device eth0 does not seem to be present, delaying initialization.Earlier in the day I had updgraded the firmware from 6.0 to 7.0.230.0.
The "Local area network connection" is not visible in Network Connections. The Ethernet controller and adapter driver is properly install (no yellow signs). All Network services are also running properly.
The network is working fine, and getting an IP address from DHCP but has to restart the DHCP service once after booting.
I have set up a network consisting of an XP desktop , Windows Home Server Desktop & XP Netbook & router.The network works as it should when the netbook is connected to the router by ethernet. However, when I connect the netbook wirelessly it (the netbook) cannot view the other computers & an access error is returned when trying to access networked folders on the desktop & server. (the desktop can see the laptop though). Disabling the security software made no difference nor did resetting winsock. So the problem lies with connecting wirelessly.
None of my wireless devices (Windows, iphones) can see the SSID from the 5ghz channel on my E2500. I have updated the firmware and reset the router to factory defaults. Still not visible. The router is set up to broadcast the SSID under wireless settings. Also, selecting "other" under iphone>settings>wifi and entering the SSID name and password gets "could not find the network (ssid)". This was working until a couple of days ago Comcast power cycled the router to make sure my cable modem was working. Now nothing.
Region : Others Model : TL-WR941ND Hardware Version : V3 Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world. * LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24). * DHCP is also disabled as this service is already provided. * Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
I am having problems setting up a VPN between a Win7 PC and a Server 2008 machine.I am using 'Routing and Remote Access'(with NAT)on the server and all seems to be set up correctly. The Win7 PC connects fine and authenticates but I am not able to see shared drives on the server.It says it is connected with PPTP, I would prefer SSTP. How do I enforce SSTP as the default connection type? I tried this from the VPN client and it wont connect at all.
get my localhost/ server to be visible to everybody via my external IP.
Things you may need to know:
-I'm running WAMP server, and Apache is installed and running.
-I have no firewall.
-I've forwarded port 80 (HTTP) in my modem and my router configurations. (Netgear WGR614v8 Router & Embarq EQ-660R 660 Series modem)
-I've tried several DNS Hosts, none of them have worked.
-I'm not too sure about the configurations of the WAMP server, though.. here's the file (nothing is edited)
Code: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL: for detailed information.
I've had the DIR-825 router for more than a year now and I've never once been able to see the second SSID that broadcasts at 5Ghz. I've set up both bands with identical settings and I have a wireless N network adapter in my laptop, but it only ever sees the 2 Ghz SSID, never the 5 Ghz one. Shouldn't I be able to see it?
Cable modem linksys WRT320N router Dlink 10 port gigabit switch 3 wired desktops networked printer/scanner external D Link Share Center 3 wireless devices
I cannot see the share center Drives on my laptop unless I plug in. Would I need to simply plug the storage drive into the router instead of the switch? Will that affect the rest of the network?
on another note, what is the best way to test my computer to computer connection speeds?
Seagate 1 TB HD connected via USB to Belkin double N + wireless router not visible to wireless connected laptop and other devices.I upgraded to latest Belkin firmware.NB The wireless router works for providine common internet access for 4 separate devices on homenetworkNB The wireless router never appears under 'network' in Win 7 file manager.NB I have been unable to get the Belkin storage manager to work at all under Win 7.Have connected External drive to laptop to set to 'share' and rename to something short ("Storage")I reconnected it to wireless router - I then tried to connect (and map) to \192,168.2.1Storage - fail.At this point Win 7 prompts for a network pwd and informs me I must 'enter a pwd to connect to 192.168.etc.' It says the account to use to logon on to the router is laptop/Admin. Which makes no sense. id expect it to list a router account, not the connecting laptop one. There is no option to change the domain.
I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?
I have a HP laptop which is shared on my network using the Windows 7 Homegroup settings. I have set up the homegroup to share the media files.
Laptop:
HP DV7TSE/Core i7/8 GB/2x320GB HDDs Wirelessly connected to my home network
Network streaming devices:
Sony BDP-S570 Blu Ray Player WDTV Live Both connected through LAN to the router
In my Laptop homegroup & sharing options I have only shared the music, video, & pictures folders. I have set the D drive (separate HDD) as not to be shared.However, when I am browsing the folders on the streaming devices it shows some folders of my D drive which don't even exist anymore. Initially when I set up the drive D drive was visible. However I later changed the settings to unshare the D Drive.
I'm using a linksys WRT54GS 7.2 router and I can't get any of the ports to be visible. I've set a static ip, and setup everything according to portforward.com and previous experience, I've never had to get ports to work with either this router or computer, so I can't say if it's ever worked for either. According to [URL] the connection is timing out before connecting.
having recently installed the correct bluetooth module inside our dell insprin1750, all the drivers loaded fine and it said all installed ok, I can see all items in the control panel/hardware list as all ok... not highlighted or anything so assume its all ok. When I click on the bluetooth icon down on the bottom is pops up and says bluetooth is working but not visable to other devices click here to change... which I do, then the problem.... nothing happens after that !
I am unable to add any devices to bluetooth list despite it saying its working ok in hardware properties etc.
My last resort is to restore pc to factory state via re-install of windows 7 but I do not really want to go down this route if at all possible.... I have tried restore to no avail.
we are starting to replace low budget hubs by the SG-300's. On the accessports we use BPDUguard and mac security (max 1 user per port).
The newest firmware is used (1.1.2.0).
When i lock a port intentionally by connecting e.g. ports 4 and 5 together (something that happens quite frequently by user-faillure) i do not see this in the WEB gui.
The CLI does tell me that the port is locked:
gi4 1G-Copper -- -- -- -- Down* -- -- *: The interface was suspended by the system.
In the webGUI i can reset the port, but in the CLI i don't get how i should do this. I tried a 'shutdown' followed by a ' no shutdown' on CLI interface level, but that does not lift the suspension state.
Questions:
- Possible to lift the suspension state using the CLI ?
- Is there a way to see the lockdown in the webGUI ?
I've had this problem for a while. I'd only get a dial-up icon with a red cross after startup or diagnostics, and no wireless networks could be detected. So I installed the HP wireless assistant, and restarted the laptop. It started working fine. Today, the icon went yellow with limited access, so I ran troubleshooting. And the problem was back. The dial-up icon reappeared, and the wireless assistant showed the WLAN was disabled. I checked the device manager. The wifi link 5100 AGN had a yellow mark on it, and in properties tab, it said ' the device is not working '. I scanned for hardware changes, and the 5100 AGN disappeared ! I restarted my laptop, and now its nowhere to be seen. Even the wireless assistant now shows only 'Bluetooth' as a connection.
I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites.
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
I've got my network up an running and all my devices (wired computer, wireless PS3, wireless smartphone, etc..) can connect to the network except for one of my wireless computers. I've set the TCP/IP to obtain IP automatically and using the correct PPPOE username/pass I try to connect, but it never works.
i have more than one laptop, all my laptops connect to the wireless network with no problem except for one. i have no idea why it doesn't want to connect and i don't know what the problem is
I'm having problems connecting to our wireless network. With my old PC in the same room in the house I've had it connected before, about a year ago. With my new computer though, I'm having issue after issue.
I recently bought a router so i could have wireless internet at home. After configurig the router i tried to connect from my laptop but it couldnt. The problem is definetly with my laptop since i tried connecting with my blackberry and my ps3 and they both connected. I tried connecting to the router with an ethernet cable and i finally had internet acces but when i try to connect wirelessly my conputer will detect the network but it wont connect!
I have a TP-Link router at home (TL-WR940N), and I cant connect to it. I tried with other computers, all of them can connect, except mine. I have an USB wifi receiver (WL-721N), system is Win7 Ultimate X64. Here are what I tried:Windows reinstallAnother receiverAnother USB slotDelete wifi network from PC and add it again
