Computer Sends But Doesn't Receive Internet Packets?

Aug 20, 2012

i have a avraetec 2200 sereis wich has a amd turion65 processer with windows xp professional and one day the internet didnt work and i looked at the activity it said aquiring network adress and it said sending packets but not receiving and its not a problem with wireless because i conected directlty to the modem and i had the same probem and also there are other devices conected to the modem and they hav

View 1 Replies


Computer Does Not Receive Packets

Jun 6, 2011

I have connected the computer to the internet a multitude of ways, and no matter how i do it, it always can not receive packets. It is sending packets though.I have tried connecting it directly to the modem, with different wires, through a router, through a network card... I'm pretty much at a loss, im not an expert by any means but im not computer illiterate either. Chances are this is a simple fix... My other computer (the one im on) works fine with both cords, connected directly, and through the router to the modem.

View 2 Replies View Related

Computer Not Sending Packets But Receive Them

Sep 2, 2012

Alright, so we have about six computers on average all on at the same time, working just fine, last night one of the laptops just, stopped working, saying there is no internet access, With every attempt it doesn't send any information. When I disconnect it from the wireless, then reconnect it, it immediately receives packets but won't send any.

View 1 Replies View Related

Internet Running Fine But At Random Intervals Not Send Or Receive Any Packets

Jan 26, 2011

I've been having this problem on my desktop and it's really annoying when i try to play online games that need a constant connection.I have Windows XP and i'm using a wireless connection via a wireless USB adapter. The problem is that the internet is running fine but at random intervals it starts to not send or receive any packets. This will usually cause my to disconnecting during a game causing other players inconvenience. After I d/c the internet will usually take 5-30 seconds to start sending and receiving packets again and regain connection.

View 14 Replies View Related

Dell :: Inspiron Mini 1011 Won't Receive Enough Packets To Connect To Internet

Nov 12, 2011

I have a Dell Insipron Mini 1011 and recently I haven't been able to connect to the internet. The network connection says it's connect to linksys, but it sends out more packets than it receives. What can I do to get it to receive more packets? Could it be my area that's causing it not to connect?

View 1 Replies View Related

Wireless Internet Connects But Doesn't Transfer Packets

Nov 30, 2011

As the topic states, the wireless card finds the signal without issues, but then does not transfer any packets after it connects. Only one computer is having this issue, all others connect perfectly fine. Also, there was no significant change to the computer recently, the problem seems to have sprung about randomly.


View 8 Replies View Related

Able To Send Packets But Not Receive Through Router

Apr 23, 2012

At random times, my internet will "drop" connection and will not download any packets, but I am still able to send packets. My Local Area Connection icon continues to say I am connected, my modem is fully functional, and my cables are good. I can get my internet back up and running for 10 minutes or so by disable and re-enabling my Network Connection. If I simply try the "repair", it gives me an error at the "Refreshing IP" step.I have done a full system scan for viruses and I am clean. My drivers are fully updated, I have disabled my firewalls, and still no luck. During the times when it is down, I can successfully ping my modem through CMD, but I get the time-out error if I ping a site, my default gateway, the DHCP Server, or the DMS Servers.I have made no changes to any major settings on my computer, nor has there been any recent additions/removals of any software.

View 7 Replies View Related

Hide Sent / Receive Packets From The TP-Link Router

May 19, 2012

I just want to know how or is it possible to hide sent/receive packets from the Router I cracked few days ago?I'm using wifi card airlive wl-1600 usb and the router is TP-Link.I mean how much is possible to hide my connectivity and everything from me with this router?

View 1 Replies View Related

Cisco WAN :: 881 3G Won't Work - Doesn't Receive IP Address

Jan 26, 2011

I'm trying to configure Cisco CISCO881G-K9 3G router to connect to mobile network without success. The cellular interface gets up but it doesn't receive IP address. It seems that profile isn't activated and it should've been.
I've attached running config and some other information gathered from router.

View 7 Replies View Related

Computer Doesn't Recognize Internet

Aug 18, 2012

My computer does not see the internet. If I do a restore to an earlier restore point, it can see the internet,, but when I do a restart it goes back to not allowing me to access it. The weather gadget cannot see the internet either. The OS is Win7 64.

View 1 Replies View Related

Routers / Switches :: Pc With Air Card Doesn't Receive Netgear

Sep 5, 2011

does air card pick up Net Gear

View 1 Replies View Related

Computer Connects To Router But Doesn't Get Internet?

Apr 25, 2011

Just purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.

View 1 Replies View Related

Cisco Routers :: RV042 Doesn't Receive IP Address From ISP On WAN Port

Jan 23, 2012

I have a problem with my WAN ports. I can´t obtain a ip adress from my ISP. I´ve tried factory reset. Upgrade to lateset firmware. Clone MAC adress from my PC. Nothing is working.
But when I plug the WAN port into my Old router it receives an adress directly. When I plug the ISP connection directly into my pc or the old router it´s working as well.
I am using the latest firmware: RV0XX-v4.1.0.02-tm.bin
And My ISP has an interface with an ADSL modem SmartAX with DHCP.

View 2 Replies View Related

Computer Connects To Internet Fine But Some Programs Say It Doesn't

Feb 25, 2011

I have a printer connected to another computer (Win XP) and it wasn't showing up on the network so I followed some installation process to install a network driver or something. Now the printer is working fine. BUT... Now that computer is having internet problems. It connects to the internet fine but some programs say it doesn't. Like Microsoft Outlook. A message always shows up saying "Must work offline" or something. And I cant listen to some things on the internet because a message comes up saying you must connect to the internet.

View 8 Replies View Related

Nortel 5520 - Specific MAC Address Doesn't Receive ARP Reply From Switch

May 26, 2013

Switch is a Nortel 5520

PC is Windows 7, with Intel 82579LM adapter

When PC was first attached to network, it could not ping gateway(switch). Turns out it was broadcasting for the gateway's MAC address, but never got a response. Tonnes of testing later, if I just change one number on the MAC address of the adapter, it receives a reply from the switch and can ping the gateway.

Why doesn't the native MAC address work?

Update: Just the vendor portion is the determining factor. As long as it starts with 2C-59-E5, it will not work. 2C-58-E5 will.

Update 2: Pinging anything in the same subnet works, just pinging the gateway interface of the switch doesn't happen. Tried on multiple drops, and there are other devices on those drops.

View 1 Replies View Related

Gigaset SE567/8 - Computer Doesn't Connect To Internet On Startup

Sep 19, 2011

I'm running Vista on my Desktop, and the router is a Gigaset SE567/8 Series. Whenever I turn my computer on, it will connect to the network, but not to the internet. I get the caution symbol in the task bar with the network icon, and it show the "identifying ( mySSID )". I have to unplug the router for 30 seconds in order to make it work correctly. This router was just installed by my ISP the other day and its been acting this way since then.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 Doesn't Automatically Connect To Internet On Computer Start-up

Aug 12, 2012

My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.

View 9 Replies View Related

Cisco WAN :: GSR12400 Counters Doesn't Increase Although Access-list Blocks / Permits Certain Packets

Jan 21, 2011

I have applied named access-list in output direction on 1GE interface on GSR12400 (IOS XR 3.4),but there is no matches. Counters doesn't increase although access-list blocks or permits certain packets (access-list works as it should).

View 2 Replies View Related

D-Link DIR-655 :: Dropping Packets While Gaming On Computer

Mar 27, 2012

I bought a DIR-655 a less than a year ago on amazon, and it was working great up until about 4 weeks ago. Ive noticed that it has been dropping alot of packets while I am gaming on my computer. I would run about 95-98 ping usually and now it jitters every 5-10 mins or so from 95-98 to up to 500. It is really troublesome during games and I dont know what to do. Ive tried disabling QoS and still nothing. I run on wireless G and N with auto 20/40 mhz. Standard WPA(personal) and it was running absolutely great until now. I know its the wireless because I have hardwired it into my laptop, both from the router and just the modem itself with no problems whatsoever. I dont know what to do about it.

View 3 Replies View Related

Routers / Switches :: Computer Is Sending Packets But Not Receiving?

Mar 8, 2011

Few systems on my LAN stops recieving packets but sending, this happened after i changed my switch, i run xp professional. i have tested cables, NICs,etc.

View 1 Replies View Related

Cisco :: PE Sends The RD When Advertises A Route Via BGP?

Nov 6, 2012

I know RD is used to make an IPv4 address unique in an MPLS VPN system.I don't understand why a PE sends the RD when advertises a route via BGP.I thought RD were only local significant. But I made a packet capture and the RD is actually sended inside the MP_REACH_NRLI attribute:

(from packet capture)
Label Stack=19 (bottom) RD=12:1, IPv4=
MP Reach NLRI Route Distinguisher: 12:1

Why the RD is sent? I suppose that the PE receiving the update checks the Route Target Extended Community to know to which VRF associate the update and not the RD.I made a test between PE1 with RD 12:1 and PE2 with RD 13:1 and there was full routes exchanges, the same when both PEs were using the same RD(all this configured in the correct VRFs). The only difference is that PE2 now shows in their corresponding VRF BPG table "Route Distinguisher 13:1".

View 19 Replies View Related

Setup Antenna That Sends Wifi Signal From One House To Another?

Aug 5, 2012

I have 1 house that is about 1/4 or 1/2 a mile away from the other house.I would like to setup an antenna that sends a wifi signal from one house to the house that does not have internet.I have a picture link that i drew up at the top. I'm not the best at drawing stuff so bare with me.Im going to type a path of the internet out to show you what I would like to get setup.[CODE]

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst Express 520 Sends TCP RST

Aug 5, 2012

I have one out of three Catalyst Express 520's I cannot connect to with Cisco Configuration Assistant or with a browser. I've used Wireshark to capture the problem, and it sends a TCP RST packet immediately upon any such connection attempt.
As these devices do not have a console port, how can I gain access to the device? We'd like to upgrade them but cannot pull the existing config.
Since these 520's don't support or are not configured for telnet/ssh and the only connection I can make is with a broswer and CCA, I'm wondering if there is a way to get the config into a text file as normally done.

View 4 Replies View Related

D-Link DCS-930L :: Camera Sends LOTS Of Data Without Any Acitivty?

Nov 20, 2012

My camera uses Lots of data without anyone viewing the camera.I have it connected to a mobile data limited subscription with 2Gb of transfer each month. When traffic goes over it will limit bandwidth to 64 kbit/s.

After I connected the camera my data usage rise very high and just in a day or two the 2Gb limit was reached.The speed was then decreased to 64 kbit/s. And the next 3 weeks until my limit was reset the total data usage was up to 4Gb.That means that in 3 weeks 2Gb data was sent from the camera in only 64 kbit/s.How could this be?I have motion detection on that will email me images, that gives me some false positives some days with sun and shadows. But that should add up to a few Mb as maximum for a month.

I also have remote power on/off on this specific camera. I have now turned it off and the sent data from my modem has stopped.WHERE does the D-link camera stream live to? It's password protected and no one except me has the password.I can't see open sessions in my router (Dovado 4GR) and my mobile broadband supplier (Telenor) can not see where the data is transferred.But the camera is sending data somewhere, WHY? and how can I turn that off?

View 10 Replies View Related

How To Receive Internet Through A LAN Port

Jan 20, 2011

I have an old Buffalo router which im trying to connect to a virgin media modemProblem is the router doesn't have a direct Ethernet port for internet, only ADSL.What I thought I could do was connect using one of the LAN ports and make my router think it was receiving internet through a network? Is this possible and how can I do it?

View 6 Replies View Related

Can Receive Email But Cannot Connect To The Internet?

Apr 26, 2011

Can receive email but cannot connect to the Internet, my user can get to all shared files on the network and get emails through exchange but cannot browse the internetWe turned off the firewall and checked DNS and the IP. It says the local area connection is connected. We added IE to the exceptions tab in firewall.

View 1 Replies View Related

Computer Doesn't Have LAN Driver

Oct 19, 2012

I recently installed a new GFX card and I went in uninstalling the other gfx drivers for my gfx card that I had previously and I guess I uninstalled the LAN driver I have went to the computer manufacturer site and downloaded it but it doesn't have an .exe so I cant install I know how to install a driver without .exe but I when I go into Device manager and go into Network Adapters but it only has the wireless network driver that im using now so i cant do it i have no where else to turn other than taking it to a computer repair shop and that person does it. [code]

View 4 Replies View Related

Connect Mobile To Pc Via Bluetooth To Receive Calls Through Internet?

Jul 2, 2011

I'm working on a project in which we have to transfer our mobile phone calls via internet and our mobile should be connected to pc via bluetooth. This is pretty easy at dialer's end but how to recieve the call via internet on some pc and direct it to the reciever via bluetooth.

View 2 Replies View Related

Computer Doesn't Like Network Cable

Apr 6, 2011

i have a computer at my company that is wired in to the network. we upgraded the core switches a while back and lost connection with the computer. i personally traced the connection back and it is plugged into the switch, but i still get no link lights on the NIC. that network drop and cable work for any other computer or laptop i plug it in to, and the problem computer in question works on any other cable/drop.

View 12 Replies View Related

My Computer Doesn't Recognize Any Addresses

Aug 30, 2011

when I click on an icon like yahoo or facebook or any other icons my compuyrt says doesnt recognize,typed in add wrong, cant figute it out. Its on dsl an my laptops work fine from my wireless.

View 2 Replies View Related

Computer Doesn't Seem To Have WPA2 As Option

Apr 18, 2011

I have an old computer (xp circa 2005) and I would like to connect to my n router wich is using wpa2. The old computer doesn't seem to have wpa2 as an option, is there anything I can do?

View 1 Replies View Related

Wireless :: Receive Router Signals At Laptop But No Internet Access?

Aug 19, 2011

i receive my router signals at my laptop but no internet access. i am receiving this problem from last 2,3 days. Before this it was working fine. I have reset the router settings many time but no results. i get the signals at my laptop but i cant access the internet . some times i got DNS server error.

View 1 Replies View Related

Windows 7 Can't Receive Internet Network Traffic - Gateway Accessible

Aug 18, 2012

I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.

View 5 Replies View Related

Copyrights 2005-15, All rights reserved