D-link Dir-615 :: No Wifi And Cannot Access Admin Homepage Via Ethernet

Mar 19, 2011

I can however connect to internet ?

Tried Explorer & Firefox

View 1 Replies


Tp-link Adsl2+ Wireless :: Td-w8960n - Disable Admin Access Over Wifi?

Nov 21, 2012

Region : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n

Just installed my new 8960 and it's working fine. However, I'd like to disable admin access from wireless, and only have that available via the LAN. I can't find anything that looks like it'll do that in any of the setup pages, is it possible? All previous wireless routers I've had have been able to do this.

View 4 Replies View Related

D-Link DIR-601 :: Unable To Get WAN Admin Access?

Apr 13, 2012

Router is a DIR-601 hardware B with firmware 2.00NA Using the router connected to a cable modem, I was unable to gain admin access via WAN.To troubleshoot the problem, I connected the router to the LAN side of my main router (DHCP server, DNS, etc.) The primary router correctly assigns a WAN IP to the 601. The 601 operates normally to access the Internet either via its WiFi or via Ethernet. The 601 is configured for a different IP address range on its LAN side so there is no IP address conflict possible with my main router.On Tools->Administration, Enable Remote Management is checked, Remote Admin port is 1080 (I've tried others), and Remote Admin Inbound Filter is set to Allow.In this case the WAN IP address of the router is When I go to with a web browser from the WAN side, I get no response. From the same computer I can ping the router with "ping".I figure I have to be missing something here. It appears that this feature just is not there, but others must have this working. It seems like I've tried every possible combination of filters, port numbers, etc., but it just doesn't respond from the WAN side. ( on port 80 works just fine from the LAN side.)

View 3 Replies View Related

D-Link DIR-601 - Access Modem Router As Admin?

Feb 26, 2013

I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?

I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.

View 4 Replies View Related

D-Link DAP-1522 :: Can't Access Admin Screen After Connected

Nov 30, 2011

I have a Netgear WNDR3300 Dual-Band and is setup to use both 2.4Ghz and 5Ghz to achieve 300 Mbps connection.

On the DAP-1522, I use IE (not Firefox or Chrome) for configuration as follow:
- IP address: STATIC
- Wireless config: using Wizard
- Wireless security: WPA2 / AES
- Mac Cloning: disabled

I tested this by connecting a Windows 7 desktop AND laptop via Ethernet cable and both laptop can obtain IP address dynamically, so my DAP-1522 is talking to the WNDR3300 (it has DHCP). Both Win 7 machines can also access the Internet.The problem is, I can NO LONGER access DAP-1522 admin screen, even by typing the static IP address assigned to it. The ONLY way I can re-access it is:

a). Reset DAP-1522

b). Shutdown the WNDR3300 wireless router, assign a static IP to the laptop, connect via cable to DAP-1522

View 3 Replies View Related

D-Link DIR-655 :: SBS2008 - Network Filter Blocks LAN Port Access To Admin Page

Oct 16, 2011

I'm using my 655 as a WAP, so nothing is connected to the WAN port.  Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page.  Even if I put the connecting PC's LAN MAC in the tablet.

View 9 Replies View Related

Ethernet Port For Lan And Wifi For Internet Access?

Apr 10, 2013

I already configured my LAN connection to only have an IP address, and a subnet mask, leaving default gateway blank

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g2 1.5 - Can't Get Access Not Via Wifi Nor Ethernet

Jul 31, 2012

So i tried to update firmare for FW_WRT54G2V1.5_1.5.02.005_US_20120221
and router just lost its connection. No i cant get access not via wifi nor ethernet to
I just have power led blinking. Tried to reset for 30 sec, no luck

View 2 Replies View Related

Routers / Switches :: Netgear Fs605 Ethernet - Wifi Printer Access In Network?

Apr 5, 2013

I use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.

View 1 Replies View Related

D-link DSL-2750U - How To Control Ethernet Access To A Wireless Router

Apr 23, 2012

I have a situation where I have tenants connecting to my wireless network and paying towards the internet bill. I am able to control this by using MAC filtering, but I have just realised that this only works for wireless clients.

Is there a way to replicate this for the router's Lan ports? Or possibly even just disable Lan access. The router model is a D-link DSL-2750U.

View 2 Replies View Related

Protocols / Routing :: Can't Get Access To Router After Changing DSl Up-link To Ethernet

Jun 15, 2011

I recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.

View 2 Replies View Related

D-link Dir-615 :: Wifi Access Point - Getting No Browser Internet Access

Apr 22, 2013

I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.

View 3 Replies View Related

Cannot Retrieve Wifi Network Password As Admin?

Feb 11, 2013

How can I be denied anything when I am the admin? I am just trying to retrieve my WiFi network password.

View 1 Replies View Related

Home Network :: TP-Link Wireless Access Point / Ethernet Switcher (TL-SF2005D) Fails To Connect?

Jun 6, 2011

I have just bought a TP-Link Wireless Access Point (TL-WA&01ND) and an ethernet switcher (TL-SF2005D).I have put the access point into client mode, allowing me to put it in my room and wirelessly connect to my router, allowing me to plug my PC in over ethernet and use the internet. However, after much fiddling with settings I cannot get it to work, as it continually searches for a network, and then fails to connect, despite the fact it is configured to use the network?I already have a similar setup with a netgear wireless G access point which works, and so I dont understand why the new box cannot do this when using what I believe to be the same settings.

Secondly I have an ethernet switch box which I bought to connect to the access point and switch the ethernet signal between my two PCs, my xbox and PC. This works fine with my primary PC (over my old access point) but when I try to connect my PC i get a DNS failure with auto IP settings and a gateway failure with manual settings, and other devices refuse to connect.

View 9 Replies View Related

D-Link :: DIR-601 - Get WiFi Access?

Jun 16, 2011

I ordered this router from walmart...My questions are before I even open it up when i receive it are..Will it be a huge pain to hook my vonage modem up and not have problems with calls?...I really got it also so that i can use a wifi device like nook to access their store...Also i was thinking of getting a roku player from netflix for my little 22 inch hdtv.

View 2 Replies View Related

Remove Skype As Homepage?

Aug 7, 2011

don't recall making skype my default internet application but apparently it has taken over. Not sure how but how do I remove same without losing my skype connection?

View 1 Replies View Related

Toshiba281c - Homepage With BT Cannot See Printer

Feb 23, 2011

i am attempting to add our Toshiba281c printer/fax to our broadband. I have connected the 2 by an ethernet cable and altered the IP address in the printer to one within our range from the provider however on our home page with BT it cannot see the printer. When i go print it says error, i have tried typing \toshiba into start and run but it just brings up error code: 0x80070035.

View 1 Replies View Related

Yahoo Homepage Is Not Opening?

Apr 19, 2012

i can open all other web pages other than [URL]

View 1 Replies View Related

D-Link DIR-655 :: Can't Get To Web GUI Admin Page

Oct 30, 2011

I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout.  Since my main Linksys router is on, and my cable modem is at, and the DHCP addresses handed out by the Linksys router is from to, getting to should not be a problem.  Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.

View 5 Replies View Related

D-Link DIR-615 :: Can't Log Into Admin To Make Changes

Dec 12, 2012

I have a DLink N300 (DIR 615), firmware 9.02NA.I've been trying to log into the "admin" but was only able to once. When I did get it everything was greyed out so I couldn't make any changes.

View 1 Replies View Related

D-Link DIR-601 :: Can't Login As Admin

Jan 6, 2013

i'm having some trouble logging in as admin. I leave the password section blank as directed but it comes up as "incorrect password".  I then tried the same using the "User" and it worked just fine but i cant change any of my settings. 

View 6 Replies View Related

D-Link DIR-655 :: Not Logged In As An Admin

Jan 28, 2012

I just bought the Dir-655 with 2.00 firmware. I am having trouble with my NAT on my game system and I have tried everything but I have everything setup on my router where it needs to be. I read somewhere, where a guy was having my same trouble and he upgraded his firmware to 2.03na. I have tried with no success whatsoever.

Downloading the file from the d-link website with no problems. But i keep getting the same message when i try to upgrade the router saying the file may be corrupt, the router is to busy, or I am not logged in as an Admin. I am the only one using the internet and I am logged into my router as the admin. it wont even start uploading the firmware to my router..

View 9 Replies View Related

Broadband :: Get Original Homepage Back?

Feb 21, 2013

They changed my homepage & I really don't like it! Want my original page back! This just happened today...2/21/13

View 1 Replies View Related

Broadband :: Cannot Surf The Web Nor Change The Homepage?

May 16, 2011

I have windows xp on sony laptop. I use dial-up, cricket broadband and wifi. When on wifi I can surf. I cant cannot get off the homepage nor change it when I connect to my cricket broadband. Cant surf because it keeps going to Crickets homepage and when closing or opening another window, it will revert back to cricket and it keeps changing homepage

View 1 Replies View Related

D-link Dir-601 :: Setting Security So Others Cannot Access Wifi?

Jun 5, 2011

I have a desktop pc and bought the DIR-601 so I could use my IPod touch. Everything works good but I think one or two other people ,possibly neighbors are using my wifi. Today I used my iPod and checked under general settings and noticed a wireless name I did not set up but then it disappeared. Also on dlink account online a few months back I was trying to do something with account, security and noticed one or two connections I didn't set up. What are the steps securing router,wifi so others cannot access or use ?

View 1 Replies View Related

D-Link DIR-655 :: Can't Connect To Admin Page

Feb 19, 2013

I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to ...

View 1 Replies View Related

D-Link DIR-825 :: Can't Seem To Login Into The Admin Console

Mar 12, 2013

I wanted to update the F/w on my rev b dir 825, but unable to load the login console for admin, I haven't changed anything and the router was still on 2.07NA f/w

View 1 Replies View Related

D-Link DIR 655 :: Blocking Website Of Admin

Apr 5, 2011

I have a dir-655 a3 router that is blocking my website ip address.I could previously access this site until one day, without changing any router settings, it started blocking communication to my website. pings, tracerts, web browsers, everything simply times out. It resolves the IP address ok but doesn't go any further than that. I was on firmware 1.31 and have now upgraded to 1.35NA, but no luck. I have also tried resetting factory defaults to no avail. If i bypass the router and plug my computer straight into the modem, the site loads fine. so its definitely the router. I have tried this on a number of devices to make sure. It appears that for some reason the router is blocking that specific IP address as it is on a shared hosting and I can't access any other sites on the same IP address. Does the router check the IP address with any web service before returning the request?

View 4 Replies View Related

D-Link DIR-655 :: Admin Interface Has Failed In Some Way

Jun 20, 2011

Bought a new DIR-655 Rev B a few weeks ago.It's web admin interface has failed in some way.  The device is still passing all user traffic in both directions, but attempts to connect to the admin interface with my web browser, from both the wired inside and the WAN outside fail.  I can telnet to the actual tcp port number that it's configured for and establish a connection, but I can't get any response from it.  At this point I'm expecting the only way I'm going to clear the condition is to power cycle the device when I get home from work.  It is to note I have the device configured for https for the admin interface.  Perhaps that's the more 'advanced' feature that's newer and is exhibiting some kind of bug, I wonder.  I'm running the latest firmware available from D-Link. 

View 5 Replies View Related

Edimax AR-7284WnA - Can't Login To Router Homepage

Aug 26, 2012

I'm having a problem with my aforementioned Edimax, I just can't seem to login to my router homepage, this happened after I reset it, the leds are indicating that the internet is being received etc it just won't let my PCs connect to it because I have to login to the config to reset it.

View 2 Replies View Related

Turn Tp-link Wifi Router Into An Access Point

Mar 3, 2013

I wish to turn my TP-Link wireless router into an access point but can't figure out how to do it. I have tried several times but without any success. Below are my information about my main router and the router I want to turn into an access point:

1- Main Router: TP-LINK 3G/4G Wireless N Router 300Mbps - Model No. TL-MR3420. url..

2- Router I wish to turn into an access point:TP-LINK Wireless N Router 150Mbps - Model No. TL-WR740N. url...

View 1 Replies View Related

D-Link DIR-601 :: So Slow In Router Admin Pages

Jun 26, 2011

I needed to immediately set a schedule and block IPs, these pages are built into the router.It took forever for the pages to load it took 30 minutes to navigae 5 pages. Every time I try it.Router is good and signal is excellent but the admin router pages to configure are frustratingly slow.As a techie it is anoying, as a customer getting support by the hour spend more on a faster better quillity router were the work can be done in 1/20th of the time it takes on this router.I'd say I have a dud but once setup the router is a great performer if you do not need to admin the router further?

View 3 Replies View Related

D-Link DIR-825 :: Admin Pages Slow And Locking Up?

Dec 7, 2009

I am having issues with my freinds new DIR-825 Rev:B1 Firmware:2.02NA, The admin pages are intermittently slow to load and sometimes wont load until I power cycle the device.  I am using IE8 on vista x64, and have the issue on all pc's on the network.  Is there a work around for this?

View 7 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved