Finding A Router That Works Well With WMP600N?
Jan 20, 2011
I've just built a PC for my brother for mild gaming and browsing and placed it in the living room, the only issue is that after buying and renovating new home, our pops wont allow us to poke holes around his big investment and use Ethernet for connectivity.Having win 7 x64, I've come down to purchasing a PCI Adapter that has been noted to work well with win7 - WMP600N... Now the problem is I am unsure which router to purchase to make it work well.
View 3 Replies
ADVERTISEMENT
Aug 30, 2011
I have a WMP600N PCI card connecting to a WRT610N router. I get a weaker signal when I connect to the N band (5Ghz) than the G band (2,8Ghz). Why is that? How should I set up my router/PCI card to get the maximum performance?
View 9 Replies
View Related
Jan 27, 2011
I'm having trouble connecting using this new card i bought. i have installed the latest drivers and i can find networks and the signal strength is good too but when trying to connect after ive entered the passkey i get the message " no network found" or "did not receive response from router" or something along those lines. i can connect with my older card which is a wmp54g but that one shows less signal strength and my connection breaks from time to time (hence the upgrade to wmp600n) on a sidenote, my wmp600n card works perfectly fine under linux but i want it to run in windows (mainly for gaming) Im running windows vista 64 bit and the wmp600n has the latest drivers installed.
View 3 Replies
View Related
Sep 9, 2012
I have been having problems with my Linksys WMP600N adapter and trying to connect to the internet.It started a few weeks ago in my old house, where it wouldn't connect unless I rebooted the router, or it would take a long time (over half an hour after being turned on to connect.)Then when I moved it got worse.At the moment it finds the wireless signals avaiable to it, but when I click connect it fails very quickly. It doesn't even try and connect, as it doesn't ask me for my wireless password.When I do get it connected, if I reboot the router and mess around, it kicks me off after a while, and then instead of showing the network available to connect to, shows it with a red cross beside, and I have to go and edit the security settings, or delete the profile and try and connect again. I have tried googling, but various different searches have turned up empty handed. My desktop is running Win 7 64bitThe rest of the specs are Core i7 920 CPU, Asus P6T Deluxe v2 Mobo, 12Gig RAM, Asus GTX 670 GPU, a Corsair SSD, 2 1TB HDDs and 1 2TB one.My Windows 7 laptop connects fine, and our Media Centre PC had some problems before I was here, but works fine now too.
View 3 Replies
View Related
Sep 23, 2012
Friend has an older 2wire home router & has no idea what the security key is to allow me to add my laptop and work at her house. How can we retrieve it.
View 1 Replies
View Related
Aug 30, 2011
i ought my router box from a man atwork and i dont know the security code. how can i find it so myeighbors cant hack into my internet
View 1 Replies
View Related
Jan 19, 2011
i can't find my security key for my wireless router. how can i find it on my desktop or laptop
View 1 Replies
View Related
Dec 20, 2012
Recently I bought a new netgear router. It has two separate wireless signals. One is the main wireless connection for my computers. The other is a slower backup network for smartphones, apple tv, and guests. All of the other devices in the house can find both signals, but my main PC is only finding the backup network. It works fine for general browsing, but is very slow for downloads and unusable for gaming
View 9 Replies
View Related
Aug 19, 2012
Where do I find the security key for the router as there are a series of numbers on the router and the box. Which one is the security key as it's not identified as such?
View 1 Replies
View Related
Apr 6, 2012
I'm looking for a wireless router with a range of up to 1500'.
View 2 Replies
View Related
Sep 15, 2011
I believe I have the router connected to the computer but its asking for a security key and I dont know where to find it?
View 1 Replies
View Related
Oct 23, 2011
I need the security key for my NETGEAR N300 wireless router. I am installing a HP wireless printer.
View 1 Replies
View Related
Feb 20, 2011
Go to Control Panel.
Click on Network and Sharing Center.
Click on Wireless Network. Connection. (your nickname for router should be listed underneath).
Click on Wireless Properties.
Click on the Security tab up top.
Click on the checkbox where it says “Show characters” and it should be spelled out for you.
View 1 Replies
View Related
May 16, 2012
i looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
View 4 Replies
View Related
Nov 5, 2011
A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.
View 8 Replies
View Related
Jul 7, 2011
I recently upgraded the OS on my laptop to Windows 7, which wiped out most of my older Vista settings. When I try to connect to my home network, I am prompted for a security key (network key?). How do I find the security key? I can't find any of the paperwork that came with my router.
By the way, I am currently using my desktop, running under Windows XP.
View 2 Replies
View Related
Dec 28, 2007
My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies
View Related
Dec 11, 2010
I'm looking for a wireless-N router with USB drive share, those are my only requirements. I was looking at a D-Link DIR-655.
View 11 Replies
View Related
Jan 12, 2010
How do I find security code for my router. It is out of warranty and live chat will not supply it to me. Is there a default code ?
View 9 Replies
View Related
Jan 20, 2012
I just purchased a befsr41. i have wireless internet so there is no modem to plug into. when i try to setup wizard it gets all the way to checking computer staus, then at 99% it says it cannot find router. i have pinged the router following the instructions on this site and the computer found the router, but when i tryed to go to browser to go to site it won't let me on any pages. i have found that while router is plugged in i can't access internet, but the set up disc can't locate the router. why wouldn't the set up wizard find router? and i am using win 7 with xp capable.
View 3 Replies
View Related
Jan 5, 2012
I have the WRT160N router for 3.5 yrs and it's worked perfectly since installing it. About two weeks ago it began intermittently dropping cable connection. First few times I thought I could resolve it by unplugging/plugging router & modem so they can "re-syn" to the cable connection. That still works but now it occurs sometimes multiple times within a few minutes/hours and then won't happen again for an entire day/days. The other day I had connectivity but instead of the usual 5 bars I only had 3 while using my laptop in the same spot in the house as usual.
View 5 Replies
View Related
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
Mar 5, 2013
Router ios for c3600, c7200, c2600 that support ikev2? (command crypto ikev2 )
View 5 Replies
View Related
Jul 17, 2011
I have a hobby network at home, the structure of which follows:*Modem * - active SPI firewall -- Then the E4200 distributes data via wifi to/between the following machines --*Server - providing services such as http, FTP, VPN, Mail, MySQL, OpenDirectory, Plex media server, etc.*Two other workstations that access their user details/settings from open directory on the server.Now the purpose of this network other than providing standard access to Internet services from within the LAN is to provide access to the services maintained on my server to users on my LAN when they leave it/go mobile.Now with my limited knowledge of networking I have been using port forwarding to direct service requests through the firewall, however I have found with the E4200 that I have a limited number of custom port fields to use (about 15) which is extremely limiting when I have as many potential services that my server can provide.I could move the Server to a DMZ but then dosen't that put all my other services that have no need to be exposed at unnecessary risk.Do I need to invest in a separate hardware firewall and put it after the modem and before the router?
View 1 Replies
View Related
Jun 22, 2007
I set up my daughter's Dell laptop last year to our WRT54G wireless router and I'm trying to connect to our wireless network now with another laptop (a new Dell) and can't find (or remember) my security code or pass phrase. Is there any place on the old laptop that I can access this info? How can I configure the new laptop without this info?
View 9 Replies
View Related
Feb 16, 2013
I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
View 6 Replies
View Related
Jan 16, 2012
I'm having trouble trying to allow this device to wake the pc. Does WMP600N support this ? When i go into the power management section i have 'Allow the computer to turn off this device to save power' but the option for 'Allow this device to wake the computer' is greyed out ? I currently have driver version 3.0.2.0 installed.
View 5 Replies
View Related
Feb 27, 2011
Is there a way to force 40 mhz on a wmp600n. I have it connected to a e2000 router. When I bootup It connects at 130 mbps and if I let it sit for about a day or so it will eventually connect at 300 mpbs which is what I want it to connect at after boot. I dont see a option in the drivers for this adapter to force 40 over 20. Seems it connects at 20, then after so long it moves to 40.
View 2 Replies
View Related
Mar 28, 2011
I just bought a Wireless-N PCI adapter (WMP600N) and followed the instructions given by the CD. I installed the card into an empty slot and ran the CD to install the drivers, but error message 221 keep appearing to tell me that the computer can't see the adapter.
My computer runs on Win 7, 32-bit so I have downloaded the latest drivers for Win 7 from your website. Now I want to manually update my adapter to the Win 7-driver, but I don't know how. The adapter won't even show up in the device manager.
View 2 Replies
View Related
Apr 7, 2013
i cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies
View Related
Feb 4, 2011
I finally got the adapter to work in my windows 7 64bit machine after ditching a Netgear WN311B which very rarely worked at speeds over 1mb/s...anyways
I set my router to N only and it connected at 270mb/s but when I set the router to 270N/54G the adapter reconnected to the router at 54mb speeds...how do I get it to connect at the N speed? I need the G setting for other wireless devices (laptop, phones, etc)
View 1 Replies
View Related
Jul 15, 2009
what are the main differences between these two PCI wireless network cards WMP300N and WMP600N The first one seems to have a better coverage due to the external antenna, the second covers more wireless standards.Witch one is the better.
View 9 Replies
View Related
Jan 20, 2012
I have a Linksys wireless WMP600n PCi adapter installed in my desktop PC and after recovering from standby, it does not automatically reconnect. I have to right-click on the Wireless Networks icon in the system tray then select "Repair". I would say it does this 9 times out of 10 (1 time in 10 I seem to luck out and it restores the connection automatically).
I have an Asus M4A88TD-M motherboard with 1 Gb of DDR3 RAM and I am running Windows XP Home Edition (SP3). There is only one PCi slot on this motherboard. Also, I am not using the wireless network software that shipped with the product but rather the native wireless networks application software that shipped with Windows XP. I have had this problem with the original driver that shipped with the product CD and the problem persists with the latest driver. I have not enabled Hibernation and there are no active power saving modes on the PC.I have reviewed all of the options in the Wireless 600n Properties/Advanced tab and have enabled the Continuously Awake Mode and disabled the Power Saving Mode but the problem persists.
I have two other PCs with the older Linksys wireless WMP300n PCi adapters and they do not exhibit this behaviour after recovering from standby - they reliably reconnect.
View 7 Replies
View Related
