I am using my neighbor's WiFi connection in my WiFi enabled motherboard PC with good signal strength. Now i want to connect a router to my PC so that i can easily use WiFi for my mobiles.
View 4 Replies
I have just bought a Wansview NC541W IP Camera to monitor my home while I am at work (my home was burgled recently) and I have no idea how to connect it to my broadband router wirelessly. I went onto the network settings of the Camera and set up the wireless setting to connect to my router network (typed in the SSID and wireless pass key etc) but nothings happening?!? I can connect the two devices with an Ethernet cable and have the camera working perfectly, but can't do it wirelessly!
View 1 Replies View RelatedWell i am currently using a BSNL DNA A211-1 wifi modem-cum-router with a wireline inbetween my PC (win7 ultm) & the router, so as to connect to the internet. i use the wifi feature of my router to connect my samsung gts5570 wifi enabled phone as well as a few other wifi enabled devices, to use internet on them. now i was thinking whether i can connect my desktop pc to my mobile phone using this wifi router somehow? how can that be done since there is already 2 different network that exist between my pc & router thru wireline & my mobile & the router thru wifi, all i need is a way to sync these to networks into one, so that my pc & my mobile use internet & at the same time they connect to each other as well.
View 3 Replies View RelatedI have both the WRT54G and a E1000 wireless routers and this problem is occurring for both of them.I use AT&T DSL and the speeds are fine when it is :
1. Not plugged into router
2. Wireless Network Mode is disabled through the router configuration page, having all devices wired.
However when wireless network mode is enabled, speeds drop significantly, 15~17 ms ping goes to 250~800 ping, and download speeds are way lower also. When the router is reset, the regular speeds will return for maybe 30 seconds to 1 minute, then it'll drop back down. I'm positive there's no outsiders connected to my network and this problem still occurs, only when the router is giving out wireless signals. Sometimes the problem randomly goes away for a while but it will always come back. I've tried many things, firmware upgrades, factory restore, none of them seem to work, the only solution so far has been to disabling it, but I need it to be on as there are other devices in other rooms of the house that need WiFi to connect to the internet.
have purchased Belkin wifi usb adapter dualband N450 and downloaded the driver from included CD, my OS is windows7 starterfter I plug in the adapter, the power ON is litting and wait for a while if will flashing but not. I opened the "NETWORK AND SHARING CENTER" and click the "CHANGE ADAPTER SETTINGS", the Belkin wireless adapter is disabled and had tried enabling it but still it is disable. I uninstalled the driver and the program, I checked in the internet and downloaded the file F9L1101v1_N600.exe and installed. Checked again but still the same problem before, Disabled and tried enabling but to no success.
View 3 Replies View Relatedive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies View RelatedAt home, I have 2 laptops and 1 smartphones, I set up a wi-fi network with WEP (WPA2) key. Since then the Windows Wireless manger is not able to connect.
If I remove the WEP key, I am able to connect.
The Internet connection is good. I am able to connect a HP, a Lenevo laptop, an iPhone with the same WEP key - but Dell does not connect.
I am running Windows XP on Latitude E6410 with Intel i5 Core.
Flex 7500
Software Version: 7.2.103.0
I have a Flex 7500 with 200 1142AP's working fine in remote office and local setup. We have since purchased 3 OEAP 602's and looking to distribute to teleworkers.
I have configured the OEAP to point to the NAT'd IP of the WLC, the OEAP does connect and is listed briefly in the WLC wireless listing but I am not able to make any configuration changes, it will then dissassociate and try the join process all over again. I have attached below the OEAP 600 event log. I see that the WLC does not support data DTLS encryption and looking to make this work.
I have tried to install the DTLS license file from the Cisco website, but says license failed to install, with no other errors.
*Jun 18 15:18:43.938: Build version 7.0.112.72 (compiled Feb 3 2012 at 01:56:39, [L]).
*Jun 18 15:18:47.859: CAPWAP State: Init.
*Jun 18 15:18:47.860: CAPWAP State: Discovery.
[Code]....
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedBEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router. When I enter the default admin for the password in the Authentication Required screen. I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.
View 5 Replies View RelatedI have a power conncet 6224 with routing enabled with several VLANs setup.VLAN Database: 6,8,10,90-254VLAN 6 is our management vlan10 is for our core network services (DNS, Domain, Exchange etc)90-254 are isolated vlans.What I need to accomplish is to prevent vlans 90-254 from communicating with each other and only allow communication to VLAN 10 and the internet. All internet firewall work will be handled by our Sonicwall. [code]
View 1 Replies View RelatedI need to configure two voice-enabled cisco routers, each one has an analog FAX machine. The routers are connected with a serial connection. In the end, the faxes should be able to fax to each other.The fax uses RJ-11 and I've established that I will be configuring FSX ports. (These ports are used for analog devices such as telephones, modems, and fax machines). I am unable to find a single site that gives information about specifically configuring fax machines.
View 3 Replies View RelatedI have a cisco2811 router and i want to convert or make it to be a voice enabled router? it has a current image/ios of (C2800nm-adventerprisek9-m), version 12.4(5a).
View 4 Replies View RelatedI was trying to port fwd my RDP and then I ended up getting side tracted and changed my routers password [URL] it would cause my router to stop working. I know my adapter is fine, because I can connect to the internet via wired connection. My wifi DHCP is not enabled however and I have no clue on how to enable it.
Here is the settings from ipconfig/all
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig/all
[code]...
Ever since I bought the E4200 months ago I had no wireless network between my laptops. pc's devices. I discovered now that I do have network (everything cool) when I disable NAT. That is all nice, but I don't have internet then.
View 8 Replies View RelatedPart of my house doesn't get the Wifi signal from my router. I want to setup a second WiFi router in another part of my house. I was thinking of running an ethernet cable out of the existing WiFi router through the walls to the other location and plugging it into the input on a second Wifi router. Would this work?
I have tried the signal repeater route and the signal just doesn't repeat strong enough.
I have a wifi router and a adsl ethernet/usb router, the adsl router connect to my laptop through usb port, and the wifi router connect to the adsl router throught ethernet/wan port.I can go online with the adsl router alone but cant with the wifi.I can connect to the wifi router's gate to config stuff, like password, wifi's name... but I just can not connect to IPS to online. Other devices can see the wifi network but when connect to it, I just can go to it's gateway.
View 12 Replies View RelatedMy router is running the stock 1.21 firmware and it has been fine for almost a year before the wireless suddenly stopped working. I reset the router and restored my previous configuration. After the reboot, the SSID is visible and I can connect to it but there is no internet connection. Also the router becomes unresponsive, i.e. timeout trying to access the router configuration page. After trying out different settings it seems that enabling WPA2+AES is the cause.In the mean time, I am running an open wireless network and everything seems fine. Is the hardware faulty? I am reluctant to update the firmware because of a negative experience with another router (same model).
View 2 Replies View RelatedDue to an issue with having to support an ALG enabled phone and a non-ALG enabled phone, I have a requirement that both NAT and RIP be enabled simultaneously, is there a Linksys product that can support this requirement? Or, more preferably a firware upgrade for the E4200 that will support this?
View 3 Replies View RelatedWhich is the best way of creating GRE Tunnels on a GLBP enabled router? I actually have two 3845 with GLBP configured as our gateway routers, and need to create gre tunnels to branches.The plan is to use the GLBP virtual IP as the Tunnel Source address and the branch WAN interface as the tunnel Destination address, how do i handle the Tunnel IP address? Do i create the same Tunnel on both gateway routers and have a glbp virtual IP address for the Tunnel Interface as well?
View 4 Replies View Relatedi have window xp pc and internet connection with wireless router recently i purchase a Bluetooth to connect my pc with wireless router how i connect internet my pc with Bluetooth from wireless router?
View 2 Replies View RelatedHow may I connect my Globesurfer III MiFi (with ATT Data Card) to a Linksys WiFirouter so that I extend the range of my MiFi device?Somehow, I think I need to convert the Linksys IP address to the Globesurfer address of 192.168.1.1 but, if that is so, how would I logon to my Linksys to change its IP address?You can see I am very green in all of this. I am told it is doable, but how?I am not even sure how to properly hook-up my Linksys to my computer and then enter its settings/ IP section. Do I connect with the WAN Internet input or the Ethernet outputs?
View 3 Replies View RelatedI've been trying to connect my downstairs PC (No wireless Card) to my upstairs Wi-Fi printer through my Wi-Fi router and have not been able to do it, even after reading and resetting my printer's network card as directed by Brother's tech support 4 times.Actually, that's not true once I WAS able to access the printer's online Interface and change a few settings, but when it came time to submit my settings, everything just froze and I wasn't able to access the interface afterwards. (see my setup below) Here's the result of the first attempts (Node Type and IP Address are NOT good)IP range NOT good 169.254.x.x .Second and temporarily successful attempt (Node Type and IP Address are good) IP Range IS good 192.168.x.x.I know it would be easier to simply buy a Wi-Fi network card for my PC but I would rather learn how to do this manually.
View 7 Replies View RelatedI have a plain pc and an iPad 2 - my daughter has a Mac laptop - we have a dsl connection to the phone line and a belkin router to connect wirelessly
View 1 Replies View RelatedI just changed my router and now cannot get my printer to work - I used the push button and pin on the wifi printer - it won't connect
View 2 Replies View RelatedI have a small motel and I provide net access to guests via the E3000 2.4Ghz band. There is no problem here. I also have set up the 5Ghz band for employee access. The networks are designated Bates Guest for the 2.4 Ghz network and Bates Private for the 5 Ghz network (yeah, believe it or not it really is the Bates Motel). As I said, the guest network is operating just fine. The private network on the other hand is giving me fits. The remote devices are not seeing the private network and, yes, the SSID is enabled. I can see and use it with my iPad no problem but my iPod does not. None of the remote users can see the private network. BTW I admin the router/network from a Win 7 desktop setup. Whats bugging me is how one of my two remote devices sees and uses the 5 Ghz network and other one does not.
View 9 Replies View RelatedWhen I have both 2,4 and 5,0 GHz band enabled on the E4200 router my PC (WMP600N-PCI adapter) has max. 130Mbps.When I enable only the 5,0 GHz band it has a speed of 270Mbps.The same speed issue with my Dell laptop.Router and PCI adapter are new (3 days old) and both have the latest firmware.Both PC and laptop are running on W7.how to increase the speed with both bands enabled?
View 6 Replies View RelatedOk, so I recently upgraded to a Linksys E3200. I am trying to get the QoS to work properly. I know that it is supposed to prioritize network traffic, so that if I have busy traffic but I am playing an online game, it should keep my gaming from stuttering while slowing other traffic down.
The problem is that every time I enable QoS everything slows down dramatically. I had a 200MB download that was going to take 5hrs with QoS enabled, that took 10min with QoS disabled. And with QoS enabled I can't even watch a youtube video without it pausing to buffer every 10 seconds. And that was the only PC/device using the network at the time. Again turning off the QoS WMM option solved the problem. I have noticed this problem with multiple routers and brands and usually just disable QoS as soon as I set up a router, however I heard that I won't get the full benefit of 300Mbps without QoS enabled.
I don't have any special Voice over IP needs, or video streaming etc. and I rarely am using multiple network devices at the same time. Is there really any reason I should enable QoS? Also I never really play with the settings for QoS, I just figure that since it comes enabled by default it should work for the average consumer.
I want to block gtalk on my new cisco 2911 security enabled router.
View 3 Replies View RelatedE3200 works great until I enable QoS. The device uses QoS and works find until reboot. If QoS is enabled and the device is rebooted, its stops routing from LAN side to Internet side. Administration-->Diagnostics allow me to ping/trace route to Internet sites and local LAN clients but cannot reach Internet from local LAN.
Windows networking icon indicates "No Internet access". I can ping other devices on local LAN.
Disabling QoS restores routing and you can re-enable QoS after that and all is well. Unfortunately, if there is a power failure when I', not there to disable/re-enable QoS afterward, other household members can't use the Internet till I get home.
Wondering if any other QoS users have observed the same problem.
I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
Is there a way to use the "no switchport command to enable routing on a port and yet sequester it from traffic on other vlans within the switch?
The switch in question is a 3750E
there is a wifi router which is out of range for me to connect wirelessly to my laptop so i was thinking to buy a wifi router which connects to my laptop an then connect to another wifi router which has a internet connection
View 1 Replies View Related
