How To Connect Linksys Wifi Router
Nov 26, 2012
How may I connect my Globesurfer III MiFi (with ATT Data Card) to a Linksys WiFirouter so that I extend the range of my MiFi device?Somehow, I think I need to convert the Linksys IP address to the Globesurfer address of 192.168.1.1 but, if that is so, how would I logon to my Linksys to change its IP address?You can see I am very green in all of this. I am told it is doable, but how?I am not even sure how to properly hook-up my Linksys to my computer and then enter its settings/ IP section. Do I connect with the WAN Internet input or the Ethernet outputs?
View 3 Replies
ADVERTISEMENT
Feb 16, 2013
I have a Cisco Linksys EA4500 router that I would like to be able to connect to the LAN network in my building. The router is currently providing internet over wifi, but I'm not able to access the LAN network. I'm using DC++ to connect to a hub in our building, and this works fine if I directly connect my computer to the wall - I can get internet and LAN access. I can also see the other computers in the 'network' section of 'computer' in windows. I can't see any of the other computers in the 'network' section if I use my router (only devices connected to my router). I would like to be able to be able to connect to the internet and the LAN network over my wireless?
View 5 Replies
View Related
Dec 26, 2012
My parents recently purchased a Linksys N600 router to satisfy their wifi needs. They are running into an issue. Apparently, only my mothers laptop is able to fully connect to the device and port data in and out. My fathers laptop and his tablet both are unable to get past the "limited connectivity" yeild. They are both running on laptops using Vista and the tablet is Android.
View 1 Replies
View Related
Jan 19, 2012
I just purchased a alfa wifi antenna. It has the cable terminal usb. but my router only has Ethernet and internet cable connection.
I have there PC( 1 desktop and to laptops.
View 1 Replies
View Related
Jan 28, 2012
However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now.
View 5 Replies
View Related
Mar 11, 2012
I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi. I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.I Try chatting with Cisco support and was told he was no longer under warranty.
View 6 Replies
View Related
Jul 19, 2012
I have problem connecting the wifi router to my desktop (running Windows XP) through LAN. When i connect the internet cable directly to my desktop, it was working. But when i connect the internet cable to wifi router, then a LAN cable from router to desktop, my desktop is showing that the network cable was disconnected. I have used the different lan cable too. I have used the reset function too. But the problem was not solved. I am getting the wifi access. But the connection between the router and the desktop was not established.
View 1 Replies
View Related
Mar 4, 2013
My Linksys EA6500 could not connect to the internet and have been getting 502 badgate.
View 1 Replies
View Related
Jan 8, 2012
I cannot connect my kindle to my wifi... I installed a wrt12oN router and it when i try to connect my kindle it comes up unavailable .
View 1 Replies
View Related
May 14, 2011
Connect WAG160Nv2 with another modem / router Wi-Fi?
View 2 Replies
View Related
Apr 24, 2012
When I try to connect new iPhone 4S, it goes to the page for all the info (IP address, etc.) instead of just asking for the password input. I've tried disconnecting router and restarting, plugging iPhone into iMac laptop, etc. (PC is hardwired into server and PC laptop, iMac laptop and former iPhone 3 all connected to wifi w/o difficulty.) Went to site of purchase (12/2011) of Lynksys E2500. They suggested might need to download a driver.how to locate and install updates to driver for E2500 to allow connection to iPhone 4S?
View 2 Replies
View Related
Feb 16, 2013
All of us connect effortlessly to wifi via the EA3500. All of us, however, also have iPhones, and yet none of us can get on wifi with our iPhones. Apple insists the problem is on the Cisco side, not the Apple side, and I have to agree with them because all of the iPhones connect effortlessly to wifi everywhere else it is available. I tried contacting Cisco support, but they wound up telling me that if I paid them they might be able to assist, since the router is outside the warranty period. (I tried explaining to them that I didn't know about the extent of the problem until 10 days ago My wife simply uses her mac; none of my daughters lives here and only one of them had an iPhone until ten days ago when I purchased the other ones. But that was to no avail.) Why no one can get on wifi with iPhones when they can, simply and effortlessly, with the PC, the iPad, and their macs?
View 5 Replies
View Related
Mar 19, 2013
To preface this message I need to state that I am functionally illiterate when it comes to any kind of networking. I just replaced an old Linksys wireless-G router with a new Linksys EA6500 router. My needs are as follows: I am connecting 4 desktop computers (two personal and two business) via Ethernet cables. In addition there will be three smart phones, two DVD players and one game console connected wirelessly. In the future I will add a printer, hard drive and more wireless devices. After installing the hardware and running the setup disk all four computers wired with Ethernet cables worked fine (although they are not set up to communicate or share files with one another - they only need to access the internet. My problem is with the wireless connectivity. I cannot get any one of the wireless devices to work.
View 3 Replies
View Related
Aug 20, 2011
I have the E3000 router. I set it up about a month ago and had my laptop and iphones and ipads all hooked up and working great. About two weeks ago, all of my devices are having problems connecting to the network and if they do connect, it is unstable (slow speeds or constantly dropping from the network). I know it is not the internet due to the fact that my LAN connection (hardwired) runs great. I am pulling my hair out trying to figure out why. I have restored to factory defauls and started over setting it up with no change in performance. I have the latest drivers on the router and the laptop. I thought maybe it was vista and my laptop or network card, but the fact that I cannot get my phones or ipads to connect with good performance I am starting to think it is something to do with the router. Also, just for more info, I am using Chater cable internet. I am running vista 64x on the laptop.
View 1 Replies
View Related
Jun 19, 2011
I have my pc connected to the router with a cable. As soon as I switch it on I can't connect with any of my wireless devices like my laptop, tablet, mobile phone. As soon as I switch off the computer it works fine with all devices.
Is this a setting where the cable connected pc gets preference that I could switch off?
View 9 Replies
View Related
Aug 20, 2012
I have an odd problem where every fortnight to three weeks none of my wifi devices (ipap, laptop, 2x android phones) can connect to my network (Linksys E2000, running firmware 1.0.04 with WPA2 personal). They can all see the network and try and connect, but all fail. Rebooting the router has no effect, and the only thing I've found that works is that I have to connect via ethernet cable (which works no problems) and then disable wireless security, save changes, and then immediately reenable wireless security and save changes again. All my devices then will automatically reconnect no problems. It's a bit annoying as my router isn't ideally placed to dig out the cable, but I wondered if there's any way of diagnosing what could be wrong? I've checked the router logs and they're not useful - the only thing I can see of note is in the DHCP log in the period when I suspect the problem arose I get 4 entries of discover / offer / request / ack going to 255.255.255.255 which seems unusual. But the security log is empty so I get nothing from that.
View 8 Replies
View Related
Dec 26, 2012
I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works. Cannot get other devices to use the wifi (iphone, ipod, android phone...). I am at a loss. Saw some suggestions about disabling a Upn or something under the router's LAN properties
View 1 Replies
View Related
Dec 25, 2012
We purchased a Canon MG 3100 printer but am unable to connect. Have rebooted router but still no joy.
View 5 Replies
View Related
Feb 12, 2012
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password.
If I don't change it - I can not use Cisco Connect app.
If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
View 5 Replies
View Related
Sep 23, 2012
I just installed an E3200 to replace my old Linksys. All my Nooks, IPADs, laptops and desktops are connecting wirelessly fine. However, I have 2 Wi Fi Radios that will pick up the network but will not connect and go into a network connect time out. One of the radios also has a hardwired connection and that is working fine. I have checked and double checked the network name, WPA key, etc. Of course I have reset all the radios and reenter new data many times, both manually and auto.
View 3 Replies
View Related
Jan 1, 2013
My 'main' Wifi SSID will just disappear and you can't connect to it. the guest account will still show up. computers/devices that are already connected will stay connected and will work fine, but anybody reconnecting will not be able to. Only solution I've found so far is to unplug and replug in my router
View 1 Replies
View Related
Apr 23, 2012
I connected my router to a new computer. The computer is connected to the Internet.My SmartPhone won't connect via the router.
I logged in to the router from my cell and entered the password.The cell says the following over and over without connecting: ScanningObtaining IP address from routerDisconnectedConnectingScanning ... over & overHow can I connect my Samsung GAlaxy SII Skyrocket to my WiFi router [WRT54GS]?
View 2 Replies
View Related
Dec 30, 2012
Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.
View 6 Replies
View Related
Aug 19, 2011
I recently purchased a WRT120n router to set up wifi in my house. I had installed the software and had the Wifi up and running. However, I am unable to connect to my wifi connection thru my cell phones. It does not connect to any of the smart-phones we have at home (Nexus S, iPhone 3G, )
The wifi connection is working on the laptops (Mac and Windows). Just not connecting to the phones.
View 1 Replies
View Related
Sep 24, 2012
I have a Cisco Linksys Router Model WRT120N - which is connect wirelessly to my MAC home computer. I also have a Dell D630 Laptop using WindowsXP. I have recently moved and my laptop used to connect to my wireless router (when I was at my old house) But now at my new house my laptop wont connect. It will connect wirelessly at other locations. The laptop picks up the wireless name and shows full strength.
View 1 Replies
View Related
Jul 13, 2012
I have Linksys configured with IP 192.168.0.x and my local network ip 192.168.1.x have firewall connected to Adtrans box that gives us internet access via T1 line and other port is connected to the switch. Wireless router is connected to the switch using internet port.I can connect to wireless using iphone but emails don't work when connected to wireless. I tried to connect laptop to wireless is does not connect.
View 9 Replies
View Related
Oct 17, 2011
What the heck is key renewal? And why does it change every 3600 seconds? Does that mean my password will change? If so how do I connect additional devices to my Wi-Fi after the 3600 seconds?
View 3 Replies
View Related
Apr 10, 2012
I have two WiFi Routers (TP-Link WR340G and Linksys WRT150N). I am wondering how can I connect this two routers via wireless fidelity
View 1 Replies
View Related
Aug 13, 2012
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies
View Related
Apr 20, 2011
I cannot connect my HTC Mozrt via wifi on WAG160N, all other devices work. I am using Firmware Version:V1.00.16.
My router settings in brief: Security Used : WPA 2mixed Radio Band : Standard Wide Chanel: 11 Standard Channel: 7 (2.442 ghz) All Advanced wireless settings page set to Auto ( apart from CTS Protection)
HTC have advised me that the phones channels are between 7-11 , i have tried those channels and i still get router connection unsucessfull, even with no protection on the wifi.
I have a feeling i have to set a IP to the device , but with the HTC Mozart I cannot do this. IOs there a way i can connect a device to the router with Auto IP adress? i have tried everything! from firmware updrades.. resetting it .. different channels..
I have my ipod touch and HTC Hero connected to the wrouter so inkow there isnt anything wrong with the router, even if it is years old!
View 2 Replies
View Related
May 25, 2011
I have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
View 6 Replies
View Related
Dec 8, 2011
New wireless router was installed yesterday. I switched from Linksys WRT54G v. 5.0 to Medialink N. I hardwired to desk top first. Then I turned on my laptop and connected to the internet without problems. Next device = Acer Aspire netbook. The netbook receives a strong signal from the router but cannot connect to the internet.
View 1 Replies
View Related
Jun 18, 2012
Part of my house doesn't get the Wifi signal from my router. I want to setup a second WiFi router in another part of my house. I was thinking of running an ethernet cable out of the existing WiFi router through the walls to the other location and plugging it into the input on a second Wifi router. Would this work?
I have tried the signal repeater route and the signal just doesn't repeat strong enough.
View 7 Replies
View Related
