My linksys WRT54GS wont allow my LG bluray player to work. It works fine directly conected to my modem, but no my router. I have tried both wired and wireless and nothing. It keeps saying Wireless or Wired Dynamic IP is not set. The LG is Model LHB535?
View 1 RepliesMy WRT54GS works fine with my wireless computer. I just tried using the router to work my wireless IPad and it wont work. The WiFI sees the router, and when I type in the router password, Linksys shows on the WiFi , but it won't download it and show a wireless icon, or let me go online. I looked in the router information and it said my version is v.1.50.9
ON the router, after the model number says ver.6. I see a 6 for downloading a firmware upgrade, but no 1.50. Any solution other than having to buy a new router?
I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.
View 2 Replies View RelatedI have an E3000 with an external hard drive attached via USB with several movies saved on it as ISO's. How to stream a movie to my wireless blu ray player, Sony S580. I was able to stream the iso to a netbook attached to the LCD tv by using VLC on the netbook. The only videos I can access on the blu ray player that are on the external hard drive are home videos I converted to DVD quality before uploading, they're not HD. I can access pictures and music on the blu ray from the external hard drive as well. I tried converting an iso to MVK but was unable to access/find it using the blu ray player.
View 2 Replies View RelatedIt is a wired, not wireless connection. The light isn't even coming on for the port it's plugged into. I tried a different cord, a different port, upgrading the firmware, and restarting each device. Nothing has worked so far.
View 9 Replies View RelatedI have WRT54G router. The VIZIO VBR231 unit finds the network OK and indicates it is connected, but nothing will stream, and when I run a Network Test it gives me this 3 line error:
Connection to 0.0.0.0... successfully established
Resolving... could not be established
Please check your connection and try again.
The VIZIO support folks were not beneficial at all, and said something about Port 80 or Port 43 not being open or available. When I talked to linksys support, they said I needed to add the VIZIO player's IP (which appears to be 0.0.0.0 in the system settings). I poked around a bit, including the Port Forwarding tab on the router setup, but could not see a way to assign 0.0.0.0 to one of these ports, and I am hesitant to experiment.
I'll probably just return the unit to Costco, but I'm trying this forum as a last ditch effort. BTW I have a VIZIO internet TV that I love, and that had absolutely no problem at all connecting to the wireless.
I am unable to see my network media player (wired CAT6 or wireless) using the SAMBA Share feature. My UPNP works fine. I do not have this issue when I am using the Linksys WRT54G or a Netgear WNDR3700 (I returned it to give the E3000 a try) - so I know all my share persmissions and device firewall is turned off. How do I get it to work with the E3000? I want to be able to transfer and stream media files to my media player using SAMBA. Usually my network media player automatically detects SAMBA Servers/Devices and adds it to its list for me to access. But when I use the E3000 that is not the case.
View 4 Replies View RelatedI have been able to play streaming video via Windows Media Player with no problems for just about forever until last month.No software has changed. i have the latest firmware (2.39.2e) for the router. i am able to play the same videos when i use my AT&T data connection or when i am connected at work, ,so i know it's not the files i'm trying to view. WMP fails to play whether i am hard connected or wirelessly connected.
View 1 Replies View RelatedI am unable to get this to hook up my vizio dvd player to wifi
View 2 Replies View RelatedI have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies View RelatedI have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650.
View 2 Replies View RelatedAs the subject says, I've hooked up a Samsung BD player to a BEFSR41 router. The router has the current firmware version. When I run the connection test for the player, the local connection is good but the Internet connection fails and the message is " The HTTP port is disabled."
I've searched high and low for a solution to no avail. I did searches on the forum and couldn't find anything. As a test, I connected the BD player directly to the DSL modem and the Internet connection worked perfectly so it appears that the blockage is within the router.
I've serched through the router setup and have changed most settings to try and find something that would work. Nothing worked so I have returned my setup to its original state.
I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.
View 2 Replies View RelatedI have had my router (linksys WRT54GS) for a few years now. I lost the disk for the inital set up and had the company send me the set up wizzard i get all the way to the last step and it tells me that the router either can connect to the router... now i was told i had to upgrade the firmware.
View 2 Replies View RelatedIs there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies View RelatedI have a Linksys WRT54GS wireless router. I was trying to get into the set up (using the IP listed in here [URL]) and it asked for a username and password. I have what I thought was the password but no idea what the username was. I tried Administrator and what I had written down as the password but nada. This was originally set up 9 years ago and 3 pc's ago.On the bottom of the router is listed Ownership ID, Device ID, and a serial numb.
View 2 Replies View Relatedi just pickup a linksys wrt54gs v5 and I cannot log into it. I reset the modem and tried to log in with the default usr/pass ( usr= leave blank , pass= admin) and it is still not working . I also tried other combination of admin, administraror, password and still nothing. Any usr/password that might work? Also I though of I might get around this problem by flashing to dd-wrt or tomato do I need to do anything in webadmin to do this?
View 6 Replies View RelatedI've gone through all the motions to change my password and wireless network name, but the original password still appears Linsys admin page and so I can't hook up to wi-fi. Also I have no way of telling what the original password is.
View 14 Replies View RelatedI have a Linksys WRT54GS router. It has been performing fine for many years. We have 2 PCs and 2 MacBooks that get on the wifi network with no problem. However, several months ago, a friend could not get his iPad online. Last week, a guest with a PC couldn't get online. I just bought an iPhone and it can't get online either. In all 3 cases, the devices found the network but when we typed the correct password the devices were unable to connect. The 4 laptops connect with no problem.
how to get my new iPhone and other new devices to connect?
I lost my Cd for the router. I have the Linksys WRT54GS V7.2. It works if I hook my computer & x-box up to it. But the problem I'm having is not being able to make it a secure network to keep my neighbors from pinging off of my internet. I know when they come home everday without looking out my window. My connection goes from great to I'm not sure my page is ever going to load. This just started when they got two or more laptops.
View 1 Replies View RelatedI am currently using a Linksys WRT54GS router. In my house we have about 15 connections to it with all but 2 of them wireless. Not all of the devices can get on at the same time so I called Linksys and they said our router only supports up to 11 or 12 connections.My question is how do I determine the amount of connections a router can handle at once so that I do not have this problem any more.
View 4 Replies View RelatedI needed to bring my laptop Toshiba satellite A135 - S4404 computer back to factory settings. When I did I lost my internet connection. I have a wireless G router. I tried setting up a new connection. When I couldnt remember my username and password to the linksys, I made several attempts to give them one.A fool hearty effort on my part. They locked me out. I was given a red X on that particular network. How to get back to where I can give them the necessary username and password?I believe I found it written on my Linksys user guide.
View 8 Replies View Relatedi lost the the cd software and i would like to down lowded on a new cd
View 1 Replies View RelatedI'm using a linksys WRT54GS 7.2 router and I can't get any of the ports to be visible. I've set a static ip, and setup everything according to portforward.com and previous experience, I've never had to get ports to work with either this router or computer, so I can't say if it's ever worked for either. According to [URL] the connection is timing out before connecting.
View 2 Replies View RelatedThe router is technically operating. My internet is up and running and working great.What I cannot do is bring up the Linksys router page to log into the router by entering the ip 192.168.1.1 in the browser URL. When I do, nothing happens.
View 9 Replies View RelatedI lost my installation CD and now I moved to a new place. I have linksys wireless-G router model-wrt54gs. how can i setup a new wireless now?
View 5 Replies View RelatedI have a Wireless-G broadband router WRT54GS and have figured out how to enable logging.This gives me the IP addresses, but I would like to be able to easily see the FQDN so I can see what my kids are looking at on the web.Is there a way to get that information via the built in logging feature?If not is there a way to take the log file and run this through sometype of program that will generate the FQDN's?
View 2 Replies View RelatedSometimes the PC does not acquire the dns etc from the router and I have to manually enter in each PC to restore internet. - only W7.
View 2 Replies View Relatedhow do i uninstall my linksys WRT54GS router? i just bought a netgear and i want to uninstall my wrt54gs router
View 9 Replies View RelatedI have a 2wire modem connected to the Internet port of my WRT54GS which is connected to a D link DSS 16+ Fast Ethernet switch. Without the switch, I can connect wired and wirelessly to my WRT54GS. However, when I put connect my any port of my D link switch to ports 1 - 5 of WRT54GS, I loose internet all together either wired/wireless to the router or wired to the D-link switch.I wonder why the IP Address will change as I understand that the switch is just a pass through switch.
View 1 Replies View RelatedI'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 1 Replies View RelatedI've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
I have a Linksys WRT54GS router that is giving my some trouble. I recently got a new PC and moved my old one into my bedroom along with my Xbox 360. So I didn't have to switch my Ethernet cable between my xbox and pc I bought another cable. Much to my dismay this new cable would not work. At first I thought maybe the cable was bad, but when I connect my pc directly into my modem it works fine. This had my come to the conclusion that it was my router. I have two pcs hooked into it that work fine and a laptop that connects to it wirelessly, but if I try to hook my xbox or pc to it using the new cable they just act as if there isn't a cable connected. When I look at my router the light for the ethernet port that the new cable is in will flash on and off. I've hard reset my router and updated the firmware.
View 2 Replies View Related