Local Only Ipv6 Connectivity?
Jul 24, 2012
My internet is really slow and i keep getting disconnected. the ipv6 box says local only. when i uncheck it it goes to limited my pc is running vista home premium
Windows IP Configuration
Host Name . . . . . . . . . . . . : anthony-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
[code]....
when i do netsh int ipv4 reset reset.log AND netsh int ipv6 reset reset.log - the command prompt says Reseting Echo Request,Failed.Access is denied.There's no user specified settings to be reset.
View 3 Replies
ADVERTISEMENT
May 21, 2011
My laptop is not connecting to the internet, I know that it is not a router problem as my mine PC and Notebook are connecting with no issues.I have removed all router devices as had an new once once it was last working.I tried this morning to set it up again without success. I have compared to setting with my pc and have found the difference is with the IPV6 connectivity.
View 6 Replies
View Related
Mar 1, 2013
How can I get IPV6 connectivity using rr. Does it has to be automatic or manual, Is there anyone with RR getting IPV6?
View 4 Replies
View Related
Jul 19, 2012
We have some technical issue with IPv6 router configuration[DLINK 655] when we try to connect it with ISP provided static IPv6 connection.
[Code]...
View 9 Replies
View Related
Oct 11, 2011
I just spent a number of hours getting a site-to-site VPN tunnel and Cisco Quick Connect client running on my WRVS4400N and RVS400. Turns out the problem was the routers don't route IPv6 properly and it takes precedence over IPv4
View 1 Replies
View Related
Jun 21, 2012
My wireless adaptor is preventing me from connecting to the internet at home, it enables to me o find the router and type in a password but only shows " unidentified network and local connectivity" with no access to the internet. When connecting via LAN, i am able to surf the internet. i have tried a full system restore, update drivers , enable and disable drivers but still nothing
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 3032 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1292 Mb
Hard Drives: C: Total - 227472 MB, Free - 200337 MB; S: Total - 1499 MB, Free - 1440 MB;
Motherboard: Advent, Roma
Antivirus: None
View 10 Replies
View Related
Mar 26, 2011
I am having a problem trying to connect my wireless usb lan adapter to the internet. i checked my networks and i noticed that it said that i had Limited Connectivity (sometimes when i fool around with it, it switches to Local Only). i also have a wireless router (EH-100) on a separate network. that router's network, on the other hand, has no problems and it says that the network is Local and Internet. i really want to use my wireless usb lan adapter to connect my DSi to the internet. my ds recognizes the signal but because the adapter is on a Limited Connectivity network, it cant connect to the internet. [code]
View 12 Replies
View Related
Oct 13, 2011
I have an Acer Aspire 5315 running windows vista home basic, version 6002.For some time i have not been able to join wireless networks, but used a long ethernet cable to my room in shared house. yesterday we got a new router and have had to use it wirelessly. it is a talk talk D-Link DSL 2780, and al other housemates are on wirelessly. mine links up (sometimes) but says local only or limited connectivity - both of which mean i cannot connect to the net wirelessly.
View 3 Replies
View Related
Jul 9, 2012
I had a tech from Comcast come out but couldn't figure it out. The tech said it could be my router but tried a different one and still nothing. The network, for me, is listed as "Unidentified" and the connection switches between Local Only and Limited Connectivity. It also says I am connected to my network with excellent strength. If I plug the router directly into the laptop it still doesnt work.
View 10 Replies
View Related
May 13, 2011
I keep getting this pop up message that says "local area network limited or no connectivity". It appears every 20-30 seconds and drops my internet connection. When I click on the message and opens up the connection box, it states it's functioning properly.
View 6 Replies
View Related
Jan 31, 2013
I have tried renewing my ip address from the cmd prompt i have tried ipconfig/release, ipconfig/flushdns,ipconfig/renew and it didnt work my connection still keeps on going back to limited or no connectivity my DHCP is connected and i have default gateway ip i can get good connectivity if i reset the router by unplugging it but it still goes back?
View 19 Replies
View Related
Dec 22, 2011
i have factory reset my Toshiba laptop un clicked ipv6 but a setting in vista only gives me local or limited connectivity and im unable to access the internet and my other Toshiba laptop allows me full access along with my phone allows full access to the wireless network therefore tells me the router is not the cause?
View 1 Replies
View Related
Nov 3, 2011
I am having connectivity problems with my router. I have gone into the router itself at 192.168.1.1, changed settings, reset settings, upgraded firmware to 1.0.04, and / or whatever else was posted by other users. I have also changed my settings for my lappy's networking adapter, re-edited my IP, removed / reinstalled network adapter, and / or whatever else I found to try to do.
I am running Vista 32 Home Premium, HP Pavillion dv6700 Notebook, with a Cisco Linksys E2000 Wireless N Router. I have connected a desktop via wireless USB adapter, my android phone, my GF's android phone, her kids iTouch and phones, and when I try to connect via wirelessly to the router, I get local access only with an unidentifiable network, which then limits my access online, (I cannot connect to the internet). It will let me get online via ethernet cable, but not wirelessly. I have bypassed the router and connected directly to the modem without any problems. I have reset the modem and router many times, as well as rebooted my laptop a lot trying to gain some connection. My laptop can connect to other wireless hotspots / access points without any problems.
View 4 Replies
View Related
Sep 16, 2012
I have gone into the router itself at 192.168.1.1, changed settings, reset settings, upgraded firmware to 1.0.04, and / or whatever else was posted by other users. I have also changed my settings for my lappy's networking adapter, re-edited my IP, removed / reinstalled network adapter, and / or whatever else I found to try to do. I am frustrated and upset that a wireless problem is giving me so much headache.I am running Vista 32 Home Premium, HP Pavillion dv6700 Notebook, with a Cisco Linksys E2000 Wireless N Router. I have connected a desktop via wireless USB adapter, my android phone, my GF's android phone, her kids iTouch and phones, and when I try to connect via wirelessly to the router, I get local access only with an unidentifiable network, which then limits my access online, (I cannot connect to the internet). It will let me get online via ethernet cable, but not wirelessly. I have bypassed the router and connected directly to the modem without any problems. I have reset the modem and router many times, as well as rebooted my laptop a lot trying to gain some connection. My laptop can connect to other wireless hotspots / access points without any problems.
View 1 Replies
View Related
Sep 19, 2012
I cannot connect local IP addresses that are connected to X3000 THROUGH LAN CABLE, but we can connect to the local IP addresses that are connected to X3000 THROUGH WIRELESS.There is definetly something wrong with the software of the X3000 since it is the only DHCP server on my network.I have 3 routers connected to X3000 thru LAN cable, the strange thing is when i connect to one of those 3 routers i can connect all devices in the network whether wired or wireless.when i connect to X3000 thru wireless i cannot access to those LAN devices in the network unless they are directly connected to X3000 thru wireless.and when i connect to x3000 with a LAN cable everything works perfect, i am able to access all devices in my network.
View 7 Replies
View Related
Nov 6, 2012
The wireless Internet at home is not working on my laptop anymore. It's working fine on my mobile as well as with other wireless networks at school for example. No matter what browser I use I usually dont get to any website. Most of the time it says access: local only, or local and internet, or limited connectivity. If I'm lucky at the right time I can open a website but then it's gone again.
View 13 Replies
View Related
Feb 7, 2011
I've just recently bought a second hand Acire laptop is v.good condition, it does everything fine apart from connect via wireless.I have another laptop which can connect on it's wireless and the Acer laptop can get a connection if you use a network cable directly to the router.I have a Sky phone & Broadband package.
Working Laptop (XP) -IP config All -
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>ipconfig /all
[code]....
View 8 Replies
View Related
Sep 7, 2012
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies
View Related
Apr 22, 2012
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies
View Related
Oct 25, 2011
how to enable ipv6 on pc?
View 1 Replies
View Related
Jun 15, 2013
I have a cheap VPS with 1 IPv4 and 5 IPv6.
I want to use 1 of the unused IPv6 connections on my computer so I can start using IPv6
View 1 Replies
View Related
May 2, 2012
Why can't I set an IPv6 address here (WS-2960-48TC-L latest IOS)
View 7 Replies
View Related
Feb 8, 2011
I am setting up a Linux apache and bind server to test the behaviour of Windows XP,Vista, 7 and Mac OS X.I have setup a apache and bind already and they were tested individually. I used Firefox and IE to access the apache page by type in the IPv6 address and the page was showed correctly. And I have tried to query the AAAA record of a local zone "testing.com" in my Bind server using nslookup and the result is good too.However, it is strange that I cannot get it work if I type in the FQDN "http://testing.com" in Firefox and IE. I tried to capture the IPv6 traffic in Wireshark (Attached in this post) and there are no DNS query when I try to access the page. Is there anything that I have to set to get it work properly?(Actually I have tested the same thing on Mac OS X and Vista too but the result is the same)Below is my Windows 7 network setting and some nslookup query:
C:Usersvmware>ipconfig /all
Windows IP Configuration"
Host Name . . . . . . . . . . . . : vmware-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 7 Replies
View Related
Oct 23, 2011
So I've got a IPv6 tunnel with Hurricane Electric and it's currently physically segmented off of my home network. A 1841 terminates the tunnel and if I want to use it I need to plug into a port thats on a VLAN with no SVI and connect outbound to test IPv6 stuff. I'd like to give access to some other users and Im wondering if 6 over 4 tunneling with AnyConnect will work for that. My thought was that they could terminate on my main firewall (5505) and then terminate their VPN session in another vlan which was connected to the IPv6 router. I have this config working right now with IPv4 and I can browse out but Im struggling with the IPv6 support piece. The admin guides from Cisco seem to indicate that I'll need to configure IPv6 addressing on the ASA which makes sense, but doesnt fit my current design.
View 2 Replies
View Related
Feb 15, 2011
i tried to disable the ipv6 using the regedit and all and i restarted my pc but when i check the local network are connection and properties the ipv6 is still checked.
View 8 Replies
View Related
Jun 25, 2012
When I check for firmware updates for my DIR-825 I get a return that there are none.How do I update for for ipv6 then?
View 5 Replies
View Related
May 5, 2013
We use ISG on asr1000 (l3 routed subscriber). Now we are trying to implement ipv6 isg sessions. so.. for ipv4 sessions we have
radius-server attribute 8 include-in-access-req
radius-server attribute 32 include-in-access-req but for ipv6 there is no such attribute#radius-server attribute ?
11 Filter-Id attribute configuration
188 Num-In-Multilink attribute configuration
218 Address-Pool attribute
25 Class attribute
30 DNIS attribute
31 Calling Station ID
32 NAS-Identifier attribute
4 NAS IP address attribute
44 Acct-Session-Id attribute
55 Event-Timestamp attribute
6 Service-Type attribute
60 CHAP-Challenge attribute
61 NAS-Port-Type attribute configuration
66 Tunnel-Client-Endpoint attribute
67 Tunnel-Server-Endpoint attribute
69 Tunnel-Password attribute
77 Connect-Info attribute
8 Framed IP address attribute
95 NAS IPv6 address attribute
list List of Attribute Types
nas-port NAS-Port attribute configuration
nas-port-id Nas-Port-Id attribute configuration
what is best practice for authorize ipv6 l3 subscribers ?
View 3 Replies
View Related
Feb 23, 2010
I can't get IPv6 to work on my Cisco 877:Do I need to do something to enable it? I have a /56 from our ISP that I would need to configure.
View 12 Replies
View Related
Aug 26, 2011
Protocol 41 with ipv6
View 1 Replies
View Related
Aug 18, 2011
when i tried to install ipv6 using dail up connection ,right click on properties scrolling networking tab checked internet protocol version 6(tcp/ipv6) and click install then select network features type is protocol selected . add - i have to choose from have disk- A: - browse- local file - system 32 here i donot know which .inf should i select .
View 1 Replies
View Related
Sep 9, 2012
I understand that IPv6 uses the MAC address of a LAN interface to make up the EUI-64 of a serial interface since serial interfaces don't have MACs. What happens when there is no LAN interface available? What if the switch has only serial interface cards?
View 2 Replies
View Related
Jan 18, 2012
When ping ipv4 is succeeded.
C:Documents and SettingsLW>ping 10.1.1.1Pinging 10.1.1.1 with 32 bytes of data:Reply from 10.1.1.1: bytes=32 time=2ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64
Reply from 10.1.1.1: bytes=32 time=1ms TTL=64Ping statistics for 10.1.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
[code].....
View 3 Replies
View Related
Jan 11, 2013
has quite frankly gotten me absolutely annoyed . I've tried just about everything, from using the netsh commands to changing the dns to 8.8.8.8 or that other one or the other. Nothing is working, I unplugged the router, problem persists, I disabled IPV6 problem persists, I restore, problem persists. The only clue I have is my router, and mysteriously, there are TWO of my computer on it. It might be nothing but most certainly has caught my attention. Also, it gives me this info about my media being disconnected
View 14 Replies
View Related
