Unable To Connect To Wireless On 1 Of 2 Computers?
Jan 2, 2013
i have a laptop and a desktop, everything was working fine until i messed with something in the router settings by accident, i changed some type of security setting and then changed it back because i was testing something.. at this point i had to remake the network for some reason, whcih was no problem i put in the pin and security code and i was able to connect through my desktop with no problem.. a few hours later i realized my laptop could no longer connect.. i recieved the unable to connect error.. i read that it could be the security settings, so i assumed i switched something before by accident and i restored to factory defaults...
after i did this my laptop could connect to the internet but my desktop couldnt connect! so it basically reversed itself.. i dunno what could be the problem.. i tried 2 of the 3 authentication modes because i am afraid if i try the 3rd i will lose internet completely then i will have no clue what to do..
I just loaded up my machine with Windows Vista Home Basic and wanted to connect my another laptop to it via Wireless AdHoc network. I created a wireless adhoc network from the network and sharing center. But was unable to connect the other laptop to it. Everything is ok. My WLAN is on, drivers are also latest.[code]
I have a new windows7 installed laptop. I couldnot connect to the networked computers which are in Windows XP. All printers and other pheripherals are connected to windows XP computer.I tried to connect even through wired router, still it doesnot detect the printer connected to the XP -Pc
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
I have a home wireless network and my service provider is Suddenlink. I use a DLink modem and have two Tosiba laptops. All of this has been working fine until this morning when one of the laptops won't connect to the internet. when I run the trouble shooting guides on it I get messages that the problem is that the modem won't connect to the internet. However, the other laptop (this one) is working fine. when I look at the network map i see both computers and a green line to the modem. on this computer, there is also a green line from modem to internet. the other computer shows a res x on the modem to internet line. this is a sudden change i have restarted the computer the modem and the router. I can also conenect this computer to the internet via a mifi that I have but not the other laptop. there are no red x's on any of the hardware when I go to the "manage" computer.
just got internet today and set up the wireless on the router using a laptop connected through LAN. All computer now connect to the router through wireless except the the laptop that was used to set it up.
i am unable to view all the computers in my work group by which sharing is also not working. whenever i tries to open shared folder in other computer this particular message appears ( no network provider accepted the given network path)
I have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
I have been searching the net for a hub of some sort for a home office. I need it to be able to support printers. It needs to be a wireless router and have a data storage which can be accessed by multiple computers. Like a backup. But the main thing im worried about is if it can be protected by antivirus and stuff.
I have set up a wireless network in my home using s d-link N+ 300 DIR-655 and the desktop that is directly connected to the modem and router can connect to the internet and my laptop can access the wireless network and get online but I have another desktop that cannot connect to the wireless network. It can see it but when i try and connect i get the message that it was unable to connect or sometimes that i was able to connect but have limited connectivity.
i have 2 dell computers (and more but just worried about these two for now)... mainpc and sparepc, i had sparepc hooked to my tv and all pc's in the house, and a tv, networked to it... it all worked great, after a few minutes of setting it up... and then the hard drive crashed on spare pc and i got a new one, installed windows again both pc's use the same installation disk both pc's are hooked to a workswitch, which is hooked to a uverse gateway (router)... but it should be noted that hooking everything to wireless changes nothing... i get the same results can reach out to anything in the house and network great... but nothing can connect to sparepc... it keeps asking for username/password, even tho none is set I've gone through all the file sharing, homegroup, and folder options... ive reset ownership on folders and permissions... ive tried making/changing user profiles... but i cannot get from mainpc to sparepc home group does not work because the network does not work. as soon as the network works, homegroup will spring to life (at least, thats what happened the last time) if i right click on a folder, go to properties, share tab, and hit the share button... it asks for permissions for users... i set them, hit share, and it comes up and says, "you cant share this folder" ... with no explanation
I have suddenly started having issues recognising and connecting to a wireless network at home on my laptop. We have 2 wireless networks at home as we use an additional D-Link router through the powerlines. (DHP-W307AV PowerLine Homeplug AV Wireless N Starter Kit)I used to be able to connect to both but now I can just connect to the main wireless router. Other laptops and smart phones in the house can connect to both. I was wondering if this had anything to do with Norton 360 so I have used their removal tool to get rid of it. Unfortunately I still can't connect to the second network.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 6087 Mb Graphics Card: Intel(R) HD Graphics Family, -1276 Mb Hard Drives: C: Total - 670401 MB, Free - 455832 MB; D: Total - 29691 MB, Free - 27474 MB; Motherboard: LENOVO, Base Board Product Name Antivirus: avast! Antivirus, Updated and Enabled
I am doing support for a library that has 2 WAP2000 devices that have no security. These are for the patrons to connect to the internet at the library. They want to track how many people are connecting to the internet. Can I log how many computers connect to these access points or get another WAP that will track how many computers connect to the internet?
i have a problem in the my local network.i have 5 computer.i share a Folder on computer 1. i see this folder on another computer but when i want to open this folder on computer 2 ,computer 3,computer 4 and computer 5 show the connect to computer 1 dialogbox and it say must insert username and password.
I have a Mac, and my wife has a PC running Windows 7. Since we moved into our new house, our Dlink DIR-601 does not seem to want to send Wi-Fi to both computers at the same time. One of the computers always seems to lag or not have internet connection at all. The Mac also seems to work better and more often than the PC when both are trying to access wi-fi.
I have messed with the channel settings, security, and most other typical settings on the router to no avail. Is there a setting I'm missing or should I enable certain settings that will allow both computers to have the same signal strength and reliability.
We have a Cisco RV042 Router. Two ISP's and using dual wan setup. We are trying to connect to a pc on our network using rdp. The pc we are trying to connect to has been configured to listed for rdp on port 3390. I have tested it internally and connect via rdp thru said port.
I have setup a port forward rule on the router to forward port 3390 to the ip of the pc. I have setup protocol binding for port 3390 service on wan1.
Here is my setup: 1- laptop1 is windows 7 with 192.168.1.1, submask 255.255.255.0 2- laptop2 is windows XP with 192.168.1.2, same submask as above. Laptop1 connects via CAT5 (non-crossover) RJ-45 into a switch (port 1). Laptop2 connects via CAT5 (non-crossover) RJ-45 into port 2 of switch. Both ends of the CAT5 are, of course, connected into each laptop's network connector.pinging resulted in timed out from both.
I have two computer but one monitor. and i wanna connect both computer with one monitor, one keyboard & one mouse. Like KVM switch. but if i connect with KVM switch then i can turn on one at a time & if i wanna use another one so i hv to turn off first one.
so how can we connect 4 remote computers so dat they can share data,as well as if data is updated on 1 pc ...it is automatically updated on rest 3.....
my three computers cannot connect to the internet, they were fine last night now it says. cannot comunicate with primary sever, do you think it is my comp or sever.
I have 3 systems. I would like to connect PC 1 to PC 2 & 3 .But not between 2 & 3. ie. 3 & 2 must be connected to PC 1. I want gigabit connection between them. The purpose is realtime streaming of audio from PC 2 & PC 3 to PC 1. The only data that goes fom PC 1 to 2 & 3 is MIDI information and automation. The problem now is that I'm having dropouts in audio, and bandwidth limitation.
whether using a dual port PCI-e lan card on PC 1 and single port card on PCs 2 & 3 or using a gigabit switch would be better. how to configure the ports for this type of a connection ( if possible that is ). Does using dedicated network cards with on-board processors and ram take all the networking load off the system's cpu and ram.
First 3 days ago i came in to my work and my 2 Desktop computers where not connecting to the internet. After trouble shooting i found that my cell phone and wireless computer would connect. then hardwiring with my cat5 cable my laptop worked as well. i couldn't connect to the router as well from the 2 Desktop computers. restarted every thing router modem computers ext. nothing.Then i tried ping tests nothing could not ping each other or the router. though the network map clealy told me the ip addresses of each computer and that it was connecting. then as though from random i tried again to log in to the router. 192.168.2.1 and one of my computers found it and could then connect to the internet.
I have a Windows 8 Pro laptop, and a new Windows 7 Laptop. When I try to setup the connection so that I can share files and folders between the two computers, I am asked for the User name and the password. I see the password in the homegroup, but entering it does nWhat is the user name in this case? My computer name or the other computer name or something else
How to connect my 5 computers to an internet. i already have a hub and lan connections but the other 4 computers still don't have internet connections.
I want to put a laptop in the barn, with a web cam. I have a phone line (with spare wires) running to the barn and I want to connect my house laptop to the one in the barn.How do I do this?
