Using 1841 For Only VPN And Have Zyxell Gigabit Unit As Router?
Jun 15, 2011
The place where I work has some "old" Cisco equipment that they no longer want/need due to upgrading just about everything.Among the stuff are a couple of Cisco 1841 units.ould one of these be a lot better choice then setting up OpenVPN for an office that has about 11 computers provided that they would actually be willing to pay for the 1841?What about ease of setup?Is is possible to use the 1841 for only VPN and have a Zyxell gigabit unit(they already have) as the router?
View 1 Replies
ADVERTISEMENT
Sep 26, 2012
I have an Ethernet Loopback Plug (4 Pairs) made and trying to test the Gigabit Interface on a 3845 Router with a fail result. The interface will show up/up only if I set the interface to 100M/Full Duplex when I plug-in the Ethernet Loopback Plug (4 Pairs). I don't see this Gigabit Interface @ 3845 router has any option to set it to internal or external loopback.
View 2 Replies
View Related
Nov 23, 2011
I'm running an Optiplex 330 with the Broadcom NetXtreme 57xx Gigabit ethernet card.
The computer is running Windows 7, 64bit, but there do not appear to be any drivers for that OS.I tried selecting Vista 64bit, but there were no drivers. The Vista 32bit doesn't work.
Then I went to Broadcom and found these drivers: [URL] the W764bit drivers didn't change the fact i'm still on a 100Mbit card (as seen on Local Area Connection Status screen and the Device manager)
View 1 Replies
View Related
Jan 10, 2012
I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
View 3 Replies
View Related
Jul 28, 2011
My BEFSR41 died. What is the replacement for this unit? I do not need wireless.
View 1 Replies
View Related
Apr 20, 2011
Monday, I had a cisco 1750 router in place suddenly stop communicating to a Larscom ISP owned unit. Since then I have sent two replacement 1721 routers with WIC-1ENET cards. I have used the original straight thru cable to connect the 10baset port on the Larscom to my E0 on the WIC-1ENET. No link lights on either. I have also tried a known working straight thru cable and a crossover cable. No link lights.
I can take a crossover cable from a pc and ping the E0 port without issue. The ISP is telling me it is an issue with my equipment.
View 1 Replies
View Related
Jan 26, 2012
For a while now I've been thinking of setting up a (hopefully) secure remote access from a location outside of my local network. Since I'm going to be away from where I usually live for about six months due to the location of my Course that I'm going to study, I want to be able to remotely access the router if something were to happen. Up until this point, I've been doing the management through a Teamviewer 6/7 remote access with my home computer and connecting from the inside IP address (Example: 192.168.1.1), but it's going to be taken away so I wouldn't be able to do that this year. Is it possible to set up a secure telnet on a Linksys E3000 Wireless Unit that way I can control it through Command Prompt, or would I have to set up Remote Management Access to use the unit outside the network through programs like Internet Explorer or Mozilla Firefox?
View 1 Replies
View Related
Sep 26, 2011
I'm looking to replace a broken Linksys 8-port router that was connected to a D-Link Wi-Fi unit. I'm not sure what hardware to go with for use in a house ~2000 sq. ft. I'll be using an Xbox (currently hardwired), Wii (wifi equipped), iPad, PC laptop along with a desk top PC (currently hardwired) sometimes simultaneously.
View 2 Replies
View Related
Jan 21, 2008
I purchased a WRT150N in early Dec 07. I had a number of problems with the unit disconnecting from wired and wireless connections erratically anywhere from 1/2 hr to 10 hrs. of operation. Troubleshoot thru Linksys chat. Ended up replacing router. Now I am having the same problem with replacement router. I've updated my windows XP, SP2, updated Ethernet driver and manually reconfigured router per Linksys advise. Wife and my laptops have N adapters, primary PC is wired in. It seems to disconnect all connections at same time, totally random. The only way to reconnect is to power down router for a few seconds and then power up.
View 9 Replies
View Related
Feb 3, 2013
I have that red gigabit router with the 150/65 service. It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work. I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.
View 9 Replies
View Related
May 7, 2012
Is it possible to run the EA4500 as a Wired only Gigabit router? To do this do I just go into the settings and disable both the 2.4 and 5 channels or do I have to do something else?
View 2 Replies
View Related
Feb 26, 2013
I have a Zyxell Modem/Router with 4 ethernet ports running 10/100, if i plug a gigabit switch in to this and then plug 3 PC's into the gigabit switch, (each PC has a gigabit NIC) will the router pull the network down to transfer all data at 100mbps or will the PC's continue to transfer at 1000mbps and only the connection from internet router will be at 100mbps.
View 4 Replies
View Related
Sep 18, 2011
Looking for my next router and it needs to have the standard WIFI capabilities, Gigabit wired ports and also ability to use 3G modem, or have one built in. I have not seen any entry level routers that does this.
View 1 Replies
View Related
Mar 9, 2012
I have a D-Link N 300 Gigabit Router. It's only allowing me to download like 30 MB at a time. If I bypass the router, the internet works just fine.How do I fix that?
View 1 Replies
View Related
Jul 18, 2011
I have a Gigabyte motherboard that ive just installed into my dads new PC and the gigabit LAN has started taking 60 seconds to connect to router, very annoying...sitting with browser open waiting for it too connect... the issue seem to first appear during windows updates, i uninstalled device driver, rebooted and reinstalled the driver off disk... this sorted the issue.. THEN windows installed more updates, however these were nothing to do with networking (Office updates) and its back ...ive tried downloading the driver from gigabyte (newer) but still the problem persists...
Core-i5 2500k
4Gb 1600Mhz RAM
GTX 460 OC
60Gb SSD Vertex 2E
500Gb Seagate SATA-II
Gigabyte P67A-D3-B3
Windows 7 x64
View 2 Replies
View Related
Jan 7, 2011
So my old router needed replacement and my dad bought a Netgear gigabit ethernet switch instead of a router. It said that it gets 1Gbps when I look inside the local area connection speed. The problem was we tried to use it like a router but only 2 computers could connect to the internet at one time but it was indeed noticeably faster when it came to video streaming speed. We since returned it and bought a Netgear N600 router that says the speed is 300mbps but like my old router it shows the speed is actually 100mbps and the streaming is good for the most part but every now and then slows down. Would using the ethernet switch with our new router work with streaming speeds and connection stability and of course let more computers connect and also use the routers wireless.
View 13 Replies
View Related
Aug 14, 2011
i have a cisco 1921 router and it has ge0/0 (LAN) and ge(0/1) WAN. ge 0/0 is well connected and i can ping it and the LED light is on but ge 0/1 has failed to come up.Ge0/1 is connected to an IDU and has a public IP address. The LED light also does not light on ge 0/1.Where could the problem be?
View 5 Replies
View Related
Feb 1, 2012
But I currently have a Linksys E3200 I bought in a moment of weakness after an evening of being pissed off at bricking my old WRT610N. (soft bricked, but I'm beyond screwing with it)
There's nothing *wrong* with it, but I am interested in something that either comes preinstalled with DD-WRT, or is well supported (ie easy to install on) by DD-WRT. I plan on selling the E3200 once I find something to replace it.
My requirements:
-Gigabit
-5 GHz (I have a file server/HTPC; I don't want to be limited to gigabit ethernet)
-$150 or less (I know $150 is high, but I figure I'll get close to that for the E3200)
View 4 Replies
View Related
Sep 9, 2012
I have some technical consultations that I would like to know which would be a better implementation.
I am seeking for clarifications whether putting VPN and firewall in a single software or separating both into separate software.
View 3 Replies
View Related
Feb 8, 2013
I have a PC with a Realtek onboard Ethernet controller, running Windows XP. It's connected to an Asus RT-n16 router loaded with TomatoUSB, via a Cat5e cable. When I set it up a month or two ago, I confirmed that I was getting a Gigabit connection to it--the little network connection icon in the Windows XP taskbar indicated "1.0 Gbps." All well and good. I just happened to check it today, and it now says "100Mbps." Nothing, as far as I know, has changed to the configuration. I went into the Device Manager, and saw that under the driver settings, in "Speed", it was set to "Auto-Negotiate." When I tried setting that to "1.0 Gbps" instead, the network connection icon in XP's taskbar once again indicated "1.0Gbps." As an experiment, I then changed it back to Auto-Negotiate, and once again the taskbar icon read "100Mbps."So I guess I have two questions. 1) Should I leave the driver setting on 1Gbps rather than Auto-Negotiate? (2) Why might the speed have switched from 1Gbps to 100Mbps over the past month if nothing's changed?
View 7 Replies
View Related
Apr 15, 2012
I am currently connected to my router via a 100 megabit cable (the router port itself is either 100M or 1G, I can't remember). There are no free ports on the router, but I want to connect additional computers to the network. If I get a gigabit switch and connect two of my PCs to it using gigabit cable, can they communicate at gigabit speeds, or will they be limited by the 100M connection back to the router? (In other words, does traffic between two computers on the switch have to be sent through the router, or not?)
View 2 Replies
View Related
Apr 2, 2012
My HD Configuration is:
+ WRT310N v2 ,
+ Win7 x64,
+ Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
My connection is still 100.0 Mbps.
View 1 Replies
View Related
Jan 2, 2011
I just purchased a WRVS4400N Wireless-N Gigabit Security Router - VPN V2.0 and seem not to work with PPPoE from bluewin.ch ( Swisscom )
View 2 Replies
View Related
Mar 21, 2011
I'm working on a CCTV DVR which has network viewing function. The front controls on the DVR won't work at all so i am unable to access any menus or burn off the footage i need. I was hoping to connect to the unit via the network viewer software or web browser but i have no idea what the ip address is. Is there any way of finding out the ip address of the unit if i connect a pc to it via a cross over cable or through a switch or am i stuck because i dont know the ip range it is in?
View 6 Replies
View Related
Nov 17, 2011
I have a plug into the mains network, but I need to connect more than one RJ45 cable to it.What is the best way to do this?Also, could I somehow connect a wi-fi extension to the plug in unit?
View 2 Replies
View Related
Mar 18, 2012
i have some issue with Hwic-4ESW, if i install one card(Hwich-4ESW) is working all port then i install one more card ( Hwic-4ESW) it not working.interface and vlan is up but from my PC to port Hwic-4esw not working. what is problem on this ?
View 9 Replies
View Related
May 29, 2013
I was looking for Rack Unit required for 7206 VXR & 3945E but couldn't find it.
View 1 Replies
View Related
Jun 28, 2012
Can I create lag betwen stack unit to increase speed between units ?? stack connection is only 1Gbit on ports 24/48 if posible lag link must be in trunk mode ?
View 4 Replies
View Related
Nov 1, 2011
3502i's LED light turn white? Ifso, what does it mean? The info on the LED lights does not mention white. The serial port and the data port are non responsive, but the unit stays powered over PoE.
View 22 Replies
View Related
Oct 10, 2011
Now i plan to order Wireless Cisco model : AIR-AP1242AG-A-K9 around 40 unit but i don't know to manage all AP becuase it has alot of AP,
View 9 Replies
View Related
Mar 22, 2011
difference between a gigabit switch router and a normal router google email harvesting edited by moderator:removed email addy to protect from spam
View 1 Replies
View Related
Sep 22, 2012
I've had my network up and running for several years with no issues. Last week I upgraded my router to a Dlink 826L and now anything connected to my downstream Dlink DSS16+ can't be accessed.
View 3 Replies
View Related
May 20, 2012
Whenever I use my router web pages often fail to load. Then after about 30 or seconds or so it will start working again. Even worse,if I go to game online I will have lag like crazy. Even if I am the only one on the router.I'm using a D-Link n300 gigabit router.
View 5 Replies
View Related
