100 Foot Cable Or Wifi N?
Dec 3, 2011Which would be better, 100 foot cable (about the distance the N would be going plus some walls) or a 100 foot cable into my attic and back down to my router?
View 1 Replies
ADVERTISEMENT
Xbox Not Connecting To Internet With 75 Foot Cable?
Oct 1, 2011I have a 10 foot ethernet Cable, and a 100 foot ethernet cable. Both cables work great from the router to my Thinkpad PC, and both work through the same port on the router. on my xbox the 10 foot cable works immediately when I hook it up to my xbox. The 75 foot cable will just not work to the Xbox. Again, it works fine to 2 of my laptops in the house. Is there a problem with Xbox and Long ethernet cables?
View 7 Replies View RelatedEquipment Necessary For A 400 Foot Range Outdoor G Network?
Dec 8, 2011I want to set up a wireless video security system around my farm. I have been having a lot of predator problems this year and I am tired of getting up in the middle of the night and running outside in my underwear to check on my livestock (especially now that it is winter) because my wife thought she heard something attacking the animals. I have been looking around at wireless wifi security cameras to use with my home wifi network and all of them ( like the Foscam FI8918W) use IEEE 802.11g standards. I have done a lot of research on this and there is just no consistent data about to do this. I know that are a lot of smart people here because I have posted here before and got some great answers. So, I am just going to tell you what I would like to achieve and you can tell me how (if possible) I can do it. I am willing to buy all new equipment if necessary. I need a omni-directional wifi G network with a minimum range of 400 feet. I have several buildings to cover so it has to be omni-directional. My house is located 350 feet from the furthest building, so I figure a 400 foot range should give me good consistent results. I already have an old Linksys WRT54GS router with Firmware Version: v1.52.8. It is located in my bedroom against an outside wall and even now I get some signal from it out at my farthest building (350 feet) and even browse the web with my laptop. But the signal is spotty and seems to come and go for no reason. What is really funny is that I have less signal in the second bathroom on the other side of the house, but I guess that is because of all the walls in between.
Now I have read that you can increase a routers broadcast strength by modifying the router settings. But you need special firmware like, Tomato, to do that and I have already tried to install , Tomato, to my router with no success. So if modifying the router software is necessary, I will need another router I guess.
1. A good strong router capable of IEEE 802.11g.
2. A good strong outdoor antenna that will connect to the router.
My problem is that I can find good routers and good antennas, but nothing that say they will work with each other. And another thing is that it appears to me from what I have read so far, that the stronger the antenna is, the more narrow the vertical broadcast field is. So, if I understand this right, with a strong antenna, the antenna and the receiving device have to be about the same height horizontally speaking. So if I put the antenna on the top of my house, it will basically shoot right over all my cameras. But if I put the antenna lower along an outside wall, then the cameras on the opposite side of the house won't receive signal. But again, this is just my understanding of what I read so far. You can see now why I am so confused about this. The more I read, the more I get confused. It seem like this should be simple, like, "Buy this router, Buy that antenna". Surly, I am not the first person who wants to extend their home network to a reasonable outdoor range. It's not like I want it to reach miles (that would be nice except for all the hackers trying hack my network).
Linksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?
Apr 23, 2013With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedHow To Broadcast My Cable On Wifi To Tv
Mar 31, 2012I am considering a toshiba tv with wifi. i want to limit the cables up the wall and would like to broadcast my cable to my tv by wifi
View 2 Replies View RelatedConvert Cable Internet To Wifi?
Sep 6, 2011I have a cable internet.There is no other hardware that connects to the Cable.There is no modem or router.Just the RJ45 cable that I plug in to my laptop and go online.Now,I want to convert this to wifi.what router/modem will I require and possibly with the model number and something thats low in price.I will use only one laptop and no intention of multiple user.I dont intend to use printers either.I am using windows 7.The network adapters that are installed in my laptop are: Intel Centrino wireless N 1030.Microsoft virtual wifi miniport adapter and Microsoft virtual wifi miniport adapter #2,RealtekPCIe FE Family Controller?
View 1 Replies View RelatedConnect To Internet Via Wifi And Lan Via Cable?
Jan 5, 2013I have a small office where we work over a cable network through our dear old router.Recently, we wired internet, which comes in via a wireless router to avoid another wire. every time one of us want internet to work, we have to disconnect the cable. We're working on windows 7 platform and I haven`tfound how to redirect the internet connection to the wireless.
View 2 Replies View RelatedSetting Up Lan / Connecting Cable And Wifi Pc?
Jul 2, 2012I just re-installed Command & Conquer generals: Zero Hour after a long time & I would like to play via Lan with another computer in the house.Here's the deal:My computer is connected to the router via cable whilst the other computer connects to the router via wifi. How can I make it possible to connect them to play LAN?
Edit: My pc is running windows 7, the other is running XP
Routers / Switches :: Attaching A Cable To Wifi?
Mar 29, 2011I have cable in my home and bought a wireless router. The router has a connection for a phone connecter, but not a cable. What can I do to get my WIFI up and running??
View 1 Replies View RelatedHome Network :: Wifi Or Rj-45 Crossover Cable?
Mar 29, 2012Ad hoc network may created between two PCs either with, wifi or a RJ-45 Crossover cable?
View 7 Replies View RelatedEthernet Cable Not Recognized By Laptop But Wifi Is
Jul 1, 2012in the past my laptop has been able to connect directly to the internet using an Cat5e cable, but recently when I have been trying to direct connect, I have been unable to, and not sure when the problem started because I always used WiFi and it worked great. I do a lot of messing around, not only with my network, but with my laptop settings also, so something might have gone bunko. I have done much troubleshooitng, such as trying to update drivers, checking to see if the hardware was disabled, etc...
View 1 Replies View RelatedTrying To Share Internet From Wifi On Pc To Mac Via Ethernet Cable
Apr 27, 2013I'm trying to share my wifi internet from my pc to my old mac ive connected them via ethernet cable, from my understanding the mac has been assigned an ip address, but I can not use the internet on it.
View 1 Replies View RelatedInternet Doesn't Work With Cable Nor Wifi
Jul 26, 2011I've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies View RelatedHow Wifi Would Stack Up Against Cat6 Ethernet Cable
Sep 11, 2012I decided to see how my WiFi would stack up against my Cat6 ethernet cable. I subscribe to Comcast's 20 mb/s connection.
View 4 Replies View RelatedCan't Connect To Internet Via Wifi Only Works If Use Cable
Feb 9, 2013my computer just randomly stopped connecting to the intenet. I checked my other computers and phone and found they were all working fine. I was having internet problems pior to this happening (internet was being very slow and some web pages and some videos wouldn't load. I think the latter had to do with flash player though.) I had also been doing some stupid stuff on my comp that I know can give you viruses. Furthermore I also knew that due to previous virus's I was not able to do a restore. So as you have probably gathered my computer was pretty buggered even before this problem. So decided to restore to factory default using some backup images I made when I first got the comp. That went smoothly however the internet stilll doesn't work unless I plus it in using a ethernet cable.
View 9 Replies View RelatedConvert Rg8u Wifi Cable To Ethernet?
Oct 13, 2011Am trying to patch an RG8U cable from a WiFi dish to an ethernet cable for connection to a router.
View 8 Replies View RelatedDg834g V4 - Packet Loss With Cable But Not In Wifi
Jan 20, 2012I have a Netgear DG834G v4 wireless router/modem, im experiencing a bit of a problem, when i ping google from my desktop which is connected via cable to the modem, i get a packet loss after about 15 seconds each and every time but when i dot the same from my laptop via wi-fi, well, there's no packet loss.. since i play most of my online games from my desktop, this is a bit of a problem for me..
View 1 Replies View RelatedLinksys Cable / Dsl :: Turn Off Wifi On Wag160nv2?
Mar 23, 2012How can I turn off the wi-fi on WAG160Nv2?Upon entering it I find no option that says Disable Wireless.
View 5 Replies View RelatedLinksys Cable / Dsl :: Wifi N Is Just Not Working On Wag320n
Mar 24, 2011I just bought a macbook and want to connect with my WAG320N. I have no problem to connect on 54mbs what tells me that I'm on Wifi G. The settings in my router was on b/g/n so I changed it to just N but then it won't connect. I don't get error or nothing. I just doesn't connect. I tried all different kind of settings but no luck.
View 8 Replies View RelatedLinksys Cable / Dsl :: Wag300n Internet Is Not Available From Wifi Ap
Nov 15, 2012I bought used Linksys WAG300N router from my friend. Internet comes from Pirelli DRG-125AG to router. Incoming internet I connect to port 1, outgoing to PC - to port 2. Also I want to share Wi-Fi connection with my linksys router, but I got problem. I enable Wi-Fi, enter SSID, choose password, save changes, my phone connects to router, but says that internet is not available from this Wi-Fi AP. First time I connect Wi-Fi, it works good, but when I reconnect, that sh*t happens. I updated firmware to 1.01.07, restored factory defaults, but nothing changed. AP isolation disabled. Sometimes even after reboot, at first WiFi connection, I get same notification from my android.
View 4 Replies View RelatedD-link Dir-615 :: Router Can Be Connected Through Wifi But Not With Cable
May 10, 2013i recently bought my dir-615 to hook up with my tp- td 8816 modem. After setting it up and successfully working one day, the router randomly stopped sending a WiFi signal. I restarted it twice and it began to work once more. I decided to install dd wrt build 21061 for my E3 dir -615 router. Unfortunately, i could not get it to work. I have dsl internet and my isp uses PPPoE. I used the option for the set up and filled out the appropriate information, but it would not work and the internet light on the router would turn orange.
Unfortunately i decided to play around with this router at the wrong time and the people in my house needed it. I decided to quickly re flash it by going into the emergency room(holding reset button during router reset until orange button starts blinking). However when i select the official d link firmware, it simply will not change. The page is stuck loading on the d-link emergency room page with no progression whatsoever. I tried the process 3 times already.
For some reason, i can connect to the router through WiFi but not through cable. When i connect through WiFi i am on the dd wrt firmware. I don't think i can return the modem to the store since it is clearly on DD WRT firmware.
I'm either looking for a solution to re flashing back to stock firmware, or making the internet work on the dd wrt firmware. The internet light turns orange when i select PPPoE on the set up...
Linksys Cable / Dsl :: X3000 Wifi Getting Low Signal
Nov 27, 2012I've bought X3000 modem recently & the only issue is pops up for me is wifi signal is too low. I've got 2 routers with me. My old linksys router WAG200G has got no issues with wifi signal. I kept both routers at the same place & compared with same standard channel yet what astonishing me that WAG200G has got more stability than X3000 regardless inspite changing to wireless -N. Is there a way to solve it. Btw, I tried all the standard channels yet it doesn't make any difference.
Firmware Version: v1.0.01.
Netgear Cgd24n V2 Cable Wifi Signal Strength Low
Dec 2, 2011The signal strength usually shows low or very low. I`ve been changing the channels through 1,6,11, but it doesn`t change the signal strength. My modem is a Netgear CGD24N v2. The computer operates ok but i`d like the signal strength to show better than low.
View 12 Replies View RelatedSplit Ethernet Cable One To Computer Other To Wifi Router
Dec 13, 2011I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.
I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.
Wifi Doesn't Work But Ethernet Cable Works
Apr 4, 2013I have been using my laptop since a year now and yesterday suddenly my internet stopped working. On top of the connectivity bar a yellow sign appeared. Now my internet status is "No internet access" but when i connect my ethernet cable the internet starts working and i can see the "Internet access" status. I have re-installed my wi-fi driver too from the orignal CD that i got with my laptop, but still no luck also i did not install anything in past 1 week and the only anti-virus i have is Avast (tried disabling it too). I plugged out the cables from my router and plugged them again but that dint work too. There are 2 other laptops (running on windows 7 just like mine) on which the wifi connection is working but on mine it is not working.
View 9 Replies View RelatedLinksys Cable / Dsl :: How To Install Wifi Antenna On Wag54g2
May 23, 2011Let's say, an antenna like that Should I open the modem and therein there could be a slot for it to be plugged in? Because on the back side of the modem none of the slots will suit such plug.
View 2 Replies View RelatedLinksys Cable / Dsl :: How To Setup Wag120n As Wifi Repeater
Mar 11, 2012I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies View RelatedLinksys Cable / Dsl :: Cannot Connect Htc Mozrt Via Wifi On Wag160n
Apr 20, 2011I cannot connect my HTC Mozrt via wifi on WAG160N, all other devices work. I am using Firmware Version:V1.00.16.
My router settings in brief: Security Used : WPA 2mixed Radio Band : Standard Wide Chanel: 11 Standard Channel: 7 (2.442 ghz) All Advanced wireless settings page set to Auto ( apart from CTS Protection)
HTC have advised me that the phones channels are between 7-11 , i have tried those channels and i still get router connection unsucessfull, even with no protection on the wifi.
I have a feeling i have to set a IP to the device , but with the HTC Mozart I cannot do this. IOs there a way i can connect a device to the router with Auto IP adress? i have tried everything! from firmware updrades.. resetting it .. different channels..
I have my ipod touch and HTC Hero connected to the wrouter so inkow there isnt anything wrong with the router, even if it is years old!
Linksys Cable / Dsl :: Wag354g - Extend The Range Of Wifi?
Feb 4, 2013I have a WAG354G that i would like to use to extend the range of my WiFi. First Question is - is it possible, and the second is how do i do it?
View 3 Replies View RelatedLinksys Cable / Dsl :: Wag320n Possible To Completely Disable Wifi
Apr 6, 2011I'm going to buy a WAG320N router modem.I've read the manual but I haven't found an answer to the silly question: is it possible to completely disable wifi, and surf in internet using the 4 lan port only?
View 2 Replies View RelatedLinksys Cable / Dsl :: X1000 Modem Does Not Allow Connection To Wifi?
Mar 13, 2013I recently bought an x1000 modem/router and found that after 2/3 days of staing active and properly functioning, it does not allow me to login to wifi connection with none of my devices (tried iPhone, iPad and 2 windows pc).Firmware version is v1.0.00 build 018 Sep 04, 2012
View 4 Replies View RelatedLinksys Cable / Dsl :: Wifi On Wag120n Stopped Working?
Mar 26, 2012Like the title says, the wifi on my wag120n stopped working. It happened suddenly, nothing was changed in the settings. It stopped showing when i'm searching for wireless connections (SSID is still enabled).
View 3 Replies View RelatedLinksys Cable / Dsl :: Wifi On Wag54g2 Performs Very Bad When Signal Is 2 Out Of 5 Or Less
Feb 11, 2011I'm facing a strange problem here with my WAG54G2 gateway. I've got a very bad connection when the signal strength is 2 out of 5 or less. I tested the DL and UL speed via url...and gives me hardly 1 Mb/s even though I have 10Mb ADSL connection. With wired and wireless connection with 3 out of 5 or more I got 8.7 Mb DL from the mentioned website.
View 1 Replies View Related