Actiontec Q1000 - Stuck In Attempting To Authenticate?
Aug 31, 2011
I'm having difficulty connecting my desktop to my wireless network. Some details to start off: I'm using a G-Sky usb wifi adapter model number GS-28usb. I recently moved from an apartment with free wifi and I set up broadband with Qwest/CenturyLink. The modem/router is an Actiontec Q1000. The firmware is up to date (I checked) and every other device I bring into the house can connect just fine (laptop, roommate's desktop and laptop, and my blackberry) I'm running Windows 7 x64 Ultimate on all machines, with all updates currently available. My network shows up in the list of available networks, signal strength fine, but when I try to connect, it does its initial "getting information..." in the small box in the corner of the screen, then the box disappears and no connection is made. The status of my adapter at that point will say "attempting to authenticate" and will remain like that even though (apparently) windows has given up on trying to connect to the network. It never gets to the point where it asks me for the passkey. I've changed just about every variable I can think of that might affect this on the router (encryption type, b/g/n, legacy mode, compatibility mode, etc, i've renamed the network, powercycled the router, etc) all to no avail. I've tried to manually add the network settings under wireless profiles, but even though the information I put in is EXACTLY correct, under available networks its says that my settings don't match those on the network. I've tried different wireless adapters, and none will connect, so I've eliminated a faulty adapter. I can connect to my laptop with an ethernet cable, and bridge the connections so I can use the internet on my desktop, but i cannot connect directly to the router.
here is my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersPancho>ipconfig/all
[Code].....
View 1 Replies
ADVERTISEMENT
Jun 4, 2012
My laptop was connecting fine to a Liknsys G router until one day it couldn't connect because it gets stuck to Attempting to authenticate. I have one more laptop, a desktop and an ipad and all connect fine to the network except of my laptop. I removed the network password but nothing again.
View 9 Replies
View Related
Jul 29, 2012
I can not connect to my wireless network from my pc. My laptop is fine. the internet worked like 5 times.. but it's been dead for two days now and everything I try seems to fail.i can see my router in connections, (sometimes not) And when i see it, it says limited acess and works for like10 mins..The OS is Windows 7 ultimate 64bit and im using a gigabyte GN-WB01GS USB WLAN card#2 network adapter. The signal strength is good. Ran all the windows trouble shooters... nothing, though it works wired. After clicking connect im told that it is attempting to authenticate forever and that is all that happens,I dont get why it works sometimes, then doesn't.when the internet works it have worked like 5 times (for 10 minutes) but now i cant even connect to it..Whenever i tried to download SOMETHING, it stopped working. And the internet i had those 5 times was were slow, not 54 mbit net. [code]
View 14 Replies
View Related
Jul 15, 2012
I have my internet through CenturyLink which is a DSL connection running on an Actiontec Q1000 on a Windows 7 set up. I'm trying to run a subsonic server on my computer to stream my music collection. It was all working beautifully until I had to switch to this modem from my previous. Now, when I go to canyouseeme.org, it can't see that 4040 and 8080 are open. They need to be for subsonic to work? I've tried to set it up as portforwarding
View 5 Replies
View Related
May 10, 2011
So we just got a new router for our higher speed internet. The modem is an Actiontec Q1000 from Qwest. We used to live out in the middle of nowhere, so we never needed to secure our internet. Now we live close to neighbors and we need to encrypt the wireless. When I try any encryption, however, I can't connect at all. I have tried temporarily having it unlocked and I could connect without a problem. It also works fine when I'm using my Ethernet cord.
Heres my IPCONFIG.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
[code]....
View 1 Replies
View Related
Oct 22, 2011
I tried changing my wireless settings from wpa2 to wpa, but it wouldn't allow me to connect. I made the change in settings because I read somewhere that it would allow you to connect your blackberry. I changed the wireless settings back to what they were, reset the router, but now the wireless sign doesn't even light up on my belkin router and it always says 'unable to connect to the network'. Something about 'attempting to authenticate'?
View 2 Replies
View Related
May 3, 2011
I have been trying to re-establish my wi-fi connection for over a day now. I have a Dell Inspiron 1545 with windows 7 and it has two wifi adapters, one is the 1397wlan and the other is a virtual miniport adapter. My carrier is at&t uverse/2wire and my service was disconnected for about eight or nine days and since then I cannot get my wi-fi back. The desktop computer works fine but my network adapters are showing attempting to authenticate and not connected for the miniport adapter. I have tried enable/disable, restoring to a previous date, ipconfig/release, and of course running the trouble shooter for Microsoft. The result is that they can't assist with my connectivity issue and that its either the adapter or my router. I can use the laptop with the ethernet cord but its not practical as the router is downstairs and I primarily work upstairs.
View 2 Replies
View Related
Sep 13, 2011
I an currently running Cisco (ACS 5.2.0.26.3) and attempting to get my Cisco 5508 WLC's (7.0.98.0) loaded into ACS for TACACS+ authentication for managment users.
However I keep getting the following error:
*emWeb: Sep 14 14:44:45.931: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed for the user:test_tac. Service-Type is not present or it doesn't allow READ/WRITE permission.
Now I've attempted the step-by-step using the following URL but to no avail.( there are some slight differences in ACS 5.2)
[URL]
Latest WLC configuration guide I could find (Software Release 7.0 June 2010) isn't much useful either.
View 6 Replies
View Related
Nov 11, 2012
I have a Q1000 and I'd like to be able to "ping yahoo.com" (etc) once in a while when I think there may be a network problem. From my desktop I type > ping yahoo.com and nothing happens. I can ping other device on my LAN but the only way to ping somewhere outside is to http://myrouter -> Utils -> Ping test.
View 4 Replies
View Related
Nov 9, 2009
I'm on a Mac running OSX. Qwest (my ISP) recently swapped my DSL modem for an Actiontec Q1000 combo modem/router. The Q1000 firewall is not nearly as configurable as my Linksys BEFSR41 (v3) router. I'd like to use the Q1000 just as a modem and use my Linksys as my router so I can access it's superior firewall configuration.
How do I physically hook the hardware up?
How do I configure the 2 items. The Q1000 uses 192.168.0.1 as it's web address. The Linksys uses 192.168.1.1. I have 2 Macs on my network, an iMac (OS 10.5.8) and a G4 (10.3.9).
Besides web browsing & email, I also have a torrent client I use (Azureus).
View 8 Replies
View Related
Dec 30, 2012
I am trying to allow an external website access to my http://localhost:8080. It is a trusted website.
I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.
My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199
I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).
Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.
All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.
View 8 Replies
View Related
May 15, 2012
I'm working as a network engineer for a service provider, and we had just gone through a pretty large scale upgrade throughout our network and service.But not long after the upgrade (or maybe ever since the upgrade, we can't confirm this because we probably missed it out due to many other links to be tested), we met a peculiar problem.Everything seems to be running fine most of the time, but there has been some weird 'ghost-like' activity which have been causing inconsistent network disruptions. At times, certain portions of the network can't communicate with other subnets.And most obviously is the problem with a continuous ping and a traceroute simultaneously. Ping is usually normal, but until a traceroute is attempted, it times out at the same time as tracert fails to obtain the route.Besides, performing a ping from the 2nd closest hop address, 10.250.253.251, which is a cisco layer 3 switch also has problems, the results shown are as belowType escape sequence to abort[CODE]
View 1 Replies
View Related
Oct 29, 2011
So all of a sudden the trusty HP 4000 stopped printing. A little bit of troubleshooting and I found out that the problem was the JetDirect card. I purchased a new one (615n - same model as the old one), installed it, ran a printer configuration page, confirming I have an IP (192.168.x.x) and subnet mask (255.255.255.0), config by DHCP.Also, ran a ping test and it appears to be fine?
View 1 Replies
View Related
Apr 11, 2011
Ok starting about an hour ago I seem to be having a problem accessing youtube as well as Facebook & now Microsoft?I have done some searching around and tried a few of the suggestions I found including; trying another browser (happens using both Mozilla and IE), clearing internet cache, unplugging my modem for a minute then plugging it back in, etc, and so far none of these have worked. I did get youtube to work once since then long enough to upload a 10 sec video but once it was uploaded and I tried editing the video details I once again found myself taken to the page that says The connection was reset.
View 3 Replies
View Related
Jan 22, 2011
i have a DIR-601. Basic settings, port forwarded for Xbox live and Wolfenstein enemy territory.I have a home PC with a wired connection and a laptop which is set up through wireless. I installed the game Wolfenstein: Enemy Territory on my laptop and every time I start the game and attempt to fetch a server list, my router resets itself. The game works fine when I connect directly to my modem, but not when I connect to my router
View 1 Replies
View Related
Jan 23, 2013
I am attempting to set up snmp v3 monitoring of my 2900 series routers from the third party Spiceworks utility. My snmp config on the router looks like this:
SNMP-Server view Westv3View internet included
SNMP-Server group Westv3Group v3 priv Read Westv3View
SNMP-Server user Westv3User Westv3Group v3 auth MD5 <password1> priv DES
[Code]....
I have set the logging level on the 2900 router to informational and see no errors of any kind popping up when I try to scan the router from SpiceWorks. Spiceworks just returns a generic "unable to contact host" message.
View 2 Replies
View Related
Dec 22, 2012
I am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password
View 1 Replies
View Related
Aug 1, 2011
I keep getting this error every few days and I have to restart my router in order to gain access back to the web utility. I reflashed the fw a second time with no success. I have read about this trip 30 reset but have had no luck finding a post which describes how to go about that method.
View 5 Replies
View Related
Jul 28, 2011
I upgraded the IOS on my 887VA router which is not yet in service. The next day I did a cold boot and made some changes. Then, when I wrote them this warning popped up which seems to imply I need to recreate my configuration from scratch in order to avoid potential issues.Is that the correct interpretation of this message/scenario? [code]
View 2 Replies
View Related
Nov 7, 2012
I have an ASA pair configured to replace a router that hosts a collection of IPSec Tunnels. Tunnels appear to work. I am lab'ing some additional controls that I would like to implement. On the Production Router that i plan to replace with the ASA's the current Tunnels are all wide open (all traffic allowed to pass). I was hoping to lock things down a little without having to reconfigure all of the Tunnels. My though was that an ACL on the Inside Interface blocking selected traffic Out (so into the LAN) should not impact the stability of the Tunnels but allow me to restrict some traffic from entering the LAN. One port that I was attempting to block is RDP 3389. When this ACL is applied to the inside interface it does not block Port 3389 at all. What am I missing? Is it that the trffic is being allowed because it is coming through one of my 'open' Tunnels?
Shouldn't IPSec Tunnel traffic be processed by the Inside Interface ACL just like all other traffic?
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 3389
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 135
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 137
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 138
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 139
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 445
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 389
access-list 145 permit ip any any
ip access-group 145 out interface Internal
This work great on a 2821 Router, but not so much on the ASA.
View 11 Replies
View Related
Jun 21, 2011
I have a Zoom adsl x6 model 5590 wireless router. I recently tried to update its firmware by following the instructions from the manufacturers site. Everything seemed to go correctly, but I am now unable to connect to the internet or my routers http address. My router now has a red power light along with a solid green light for the wlan and dsl.
View 2 Replies
View Related
Mar 13, 2011
Getting error message W016.15ISP when attempting to make wifi calls on my T-Mobile myTouch 4g cellphone. I currently have internet service with Charter which uses a cable modem/router.
View 1 Replies
View Related
Apr 28, 2012
Just upgraded to Verizon FIOS and had an Actiontec MI424WR Rev F router (firmware v.20.10.7) supplied. Went to white-list my ereader's MAC in router and intitial page asked me to change the default login and password which I planned to do anyway. I know what I changed them to. Made changes, logged out, then decided I really wasn't comfortable with WEP and went back to change it to WPA. All I got was "Login failed, please try again." Finally hit the reset button and started over at the "please change login and password" screen. I can get in then.
I've been through this six times now and cannot get past the initial login without a hard reset. Tried keeping "admin" as the login because I have met peripherials that are touchy about that. Not a major issue now that I have the router set up to my satisfaction, but it frustrates me to not have password access to any part of my system. (Yes, I am that anal.)
View 3 Replies
View Related
Jun 10, 2011
I'm purchasing an Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway to be used strictly as a modem with Qwest DSL. I'm also purchasing an Asus Black Diamond Dual Band Processor, Hardware NAT, 5 Internal Antennas, Fast Gigabit Ethernet and 128MB DDR2 Wireless Router (RT-N56U) to be utilized a my primary router.My question is how do I set up the Actiontec modem to be strictly used as a modem without the wireless g function transmitting since I will be using the ASUS as the primary router? Or do I just let both of the transmit as routers together?
View 3 Replies
View Related
Aug 30, 2011
How to set up DHCP correctly on my Actiontec GT701-WG router?
View 14 Replies
View Related
Sep 19, 2012
I tried to forward a new port on my Actiontec V1000H router. I was able to sign in without incident, but the moment I tried to begin navigating within pages, I would be greeted with a red screen reading '400 Bad Request - No request found' roughly 60% of the time. Usually refreshing the page a number of times would allow me to proceed, but because the Telus software for the V1000H cycles through so many pages when applying a new forwarded port to the firewall, it's almost statistically impossible to make it through.I have no issues with internet connectivity, and having this port forwarded isn't critical, but this problem is a real nuisance as it turns changing any router settings into a long, tedious, and sometimes downright impossible chore.
View 5 Replies
View Related
Dec 10, 2012
I have Centurylink DSL as an internet provider. They recently replaced my old Actiontec GT701-WG with an Actiontec C1000A. Since upgrading the modem, I can't get my XP laptop to connect. I can get an iPad, Vista laptop, a Windows 7 laptop, and a WII to connect using the exact same settings I had on the old Actiontec.I've set the C1000A to WPA/WPA2-PSK and TKIP/AES. I do not have an access list enabled. I set the SSID and key to the same settings I had on the original Actiontec. I've upgraded the drivers on my XP laptop to the latest version. I can see the SSID in my list of networks but when I try to connect, it just sits there saying connecting. I've set up my old Actiontec as a wireless switch and can connect with the XP laptop without any problems. I've also connected to a Netgear 802.11N wireless router at another location without problems.
View 7 Replies
View Related
Nov 23, 2012
I've recently switched to a Verizon hotspot. For additional range while I'm at home, can I configure my Actiontec PK 5000 as a repeater for the hotspot signal?
View 2 Replies
View Related
Dec 8, 2011
I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware
View 4 Replies
View Related
May 6, 2011
I've recently bought an Actiontec V1000H gateway from Telus because my previous gateway burnt out. It seemed to work fine at first, but then I started getting disconnected at random. The only way I have found to fix this issue temporarily is to ipconfig /release and /renew.
View 5 Replies
View Related
Jun 26, 2011
I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.
View 1 Replies
View Related
Sep 11, 2011
We recently moved to a place with included internet that was going through a wireless network. All of my devices connect fine, no problem (iPhone xbox and USB adapter) but the lady friends laptop wont connect. It recognizes the network, connects to the network after the password has been entered but will not "give out" any internet. Signal Strength is very good (router is maybe 20 feet from us). All the drivers for the wireless adapter in her laptop are up to date and it will connect to other networks, like at her mom's. This is a newer router and funny enough we actually used this exact model at our last place and it had no problems with this. After calling our landlords ISP they said that there may be a problem with the compatibility of her laptop (its only 3 years old and connects to other networks fine) with the router, yet it connected to the same model not 6 months ago.
People we are at wits end and I am . As my username states If I cant find a fix for this I will enjoy smashing this thing to bits.
FYI: the router is an Actiontec V100H
View 8 Replies
View Related
Aug 4, 2012
I have a problem with a new Actiontec modem from Verizon FIOS The past few years I've had two cable modems working fine for verizon fios. Both were the NIM-100 from Motorola.The second "slave" cable modem is connected via coax cable.I recently replaced the primary NIM-100 and the associated wireless router with the new Actiontec modem MI424-WR IN viewing the network connection via the Actiontect control panel, it shows the other slave modem connected via coax but claims that the status is "Cable Disconected"
View 3 Replies
View Related
