Cisco :: Attempting To Use SNMP V3 Between 2900 Router And SpiceWorks

Jan 23, 2013

I am attempting to set up snmp v3 monitoring of my 2900 series routers from the third party Spiceworks utility.  My snmp config on the router looks like this:
 
SNMP-Server view Westv3View internet included
SNMP-Server group Westv3Group v3 priv Read Westv3View
SNMP-Server user Westv3User Westv3Group v3 auth MD5 <password1>  priv DES

[Code]....

I have set the logging level on the 2900 router to informational and see no errors of any kind popping up when I try to scan the router from SpiceWorks.  Spiceworks just returns a generic "unable to contact host" message.

View 2 Replies


ADVERTISEMENT

Cisco VPN :: ISRG2 2900 - How To Count Number Of Cumulative VPNs On 2900

Aug 25, 2011

If there is a router ISRG2 2900 with SEC license and without HSEC license, there is a limit in count of cumulative encrypted VPN tunnels of 225. Which commands can show us a number of current tunnels on the router, so we can see if we are near this limit of 225?

View 4 Replies View Related

D-Link DIR-601 :: Router Restarts When Attempting To Play Game

Jan 22, 2011

i have a DIR-601. Basic settings, port forwarded for Xbox live and Wolfenstein enemy territory.I have a home PC with a wired connection and a laptop which is set up through wireless. I installed the game Wolfenstein: Enemy Territory on my laptop and every time I start the game and attempt to fetch a server list, my router resets itself. The game works fine when I connect directly to my modem, but not when I connect to my router

View 1 Replies View Related

D-Link DIR-825 :: Getting 404 File Not Found When Attempting To Access Router Web Config 2.05

Aug 1, 2011

I keep getting this error every few days and I have to restart my router in order to gain access back to the web utility. I reflashed the fw a second time with no success. I have read about this trip 30 reset but have had no luck finding a post which describes how to go about that method.

View 5 Replies View Related

Laptop Stuck When Attempting To Authenticate

Jun 4, 2012

My laptop was connecting fine to a Liknsys G router until one day it couldn't connect because it gets stuck to Attempting to authenticate. I have one more laptop, a desktop and an ipad and all connect fine to the network except of my laptop. I removed the network password but nothing again.

View 9 Replies View Related

Cisco WAN :: Configuring 2900 Router For PPPoE?

Sep 6, 2012

I have DSL 8Mbps DL and 768kbps UL The setup look like this:Internet -> Modem -> Cisco Router -> Firewall -> Switch Core - > Multiple switches like sfe2000p? CiscoRouter: i use port gig0/1 for PPPoE and i use port gig0/2 for LAN static Router port gig0/2 with 122.54.144.153/29 connected directly to Firewall port13 with 122.54.144.154/29 ?i want 122.54.144.153/29 will my default gateway ? include no limit bandwidth,filter etc at router, Firewall will be DHCP Server and control the bandwidth, filtering etc and the client computer should get 8Mbps

Mode: Routing
Encapsulation: PPPoE
Username: xx
Password: xx
Service Name: ISP name

[code]....

View 9 Replies View Related

Cisco WAN :: Disabling USB Console On 2900 Router

Apr 30, 2012

Any way to disable the usb console port on a 2900 series router?                  

View 2 Replies View Related

Cisco VPN :: 2900 Router / One Hub Router And 3 Spokes - DMVPN Error

Jun 21, 2012

I configured dmvpn at cisco router 2900. one hub router and 3  spokes. all of them are working normally but tomorrow i see one error at at one spoke router.
 
error:
Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license

View 1 Replies View Related

Ping Time Out When Attempting Tracert / Traceroute?

May 15, 2012

I'm working as a network engineer for a service provider, and we had just gone through a pretty large scale upgrade throughout our network and service.But not long after the upgrade (or maybe ever since the upgrade, we can't confirm this because we probably missed it out due to many other links to be tested), we met a peculiar problem.Everything seems to be running fine most of the time, but there has been some weird 'ghost-like' activity which have been causing inconsistent network disruptions. At times, certain portions of the network can't communicate with other subnets.And most obviously is the problem with a continuous ping and a traceroute simultaneously. Ping is usually normal, but until a traceroute is attempted, it times out at the same time as tracert fails to obtain the route.Besides, performing a ping from the 2nd closest hop address, 10.250.253.251, which is a cisco layer 3 switch also has problems, the results shown are as belowType escape sequence to abort[CODE]

View 1 Replies View Related

Attempting To Get HP 4000 Printer Configured And Working?

Oct 29, 2011

So all of a sudden the trusty HP 4000 stopped printing. A little bit of troubleshooting and I found out that the problem was the JetDirect card. I purchased a new one (615n - same model as the old one), installed it, ran a printer configuration page, confirming I have an IP (192.168.x.x) and subnet mask (255.255.255.0), config by DHCP.Also, ran a ping test and it appears to be fine?

View 1 Replies View Related

Attempting To Authenticate - Unable To Connect To The Network

Oct 22, 2011

I tried changing my wireless settings from wpa2 to wpa, but it wouldn't allow me to connect. I made the change in settings because I read somewhere that it would allow you to connect your blackberry. I changed the wireless settings back to what they were, reset the router, but now the wireless sign doesn't even light up on my belkin router and it always says 'unable to connect to the network'. Something about 'attempting to authenticate'?

View 2 Replies View Related

Actiontec Q1000 - Stuck In Attempting To Authenticate?

Aug 31, 2011

I'm having difficulty connecting my desktop to my wireless network. Some details to start off: I'm using a G-Sky usb wifi adapter model number GS-28usb. I recently moved from an apartment with free wifi and I set up broadband with Qwest/CenturyLink. The modem/router is an Actiontec Q1000. The firmware is up to date (I checked) and every other device I bring into the house can connect just fine (laptop, roommate's desktop and laptop, and my blackberry) I'm running Windows 7 x64 Ultimate on all machines, with all updates currently available. My network shows up in the list of available networks, signal strength fine, but when I try to connect, it does its initial "getting information..." in the small box in the corner of the screen, then the box disappears and no connection is made. The status of my adapter at that point will say "attempting to authenticate" and will remain like that even though (apparently) windows has given up on trying to connect to the network. It never gets to the point where it asks me for the passkey. I've changed just about every variable I can think of that might affect this on the router (encryption type, b/g/n, legacy mode, compatibility mode, etc, i've renamed the network, powercycled the router, etc) all to no avail. I've tried to manually add the network settings under wireless profiles, but even though the information I put in is EXACTLY correct, under available networks its says that my settings don't match those on the network. I've tried different wireless adapters, and none will connect, so I've eliminated a faulty adapter. I can connect to my laptop with an ethernet cable, and bridge the connections so I can use the internet on my desktop, but i cannot connect directly to the router.

here is my ipconfig/all:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersPancho>ipconfig/all

[Code].....

View 1 Replies View Related

Cisco WAN :: 1 GigE WAN Module For 2900 / 3900 Router

May 28, 2013

I am in search of a 1 Gig Ethernet WAN module for 2900, 3900 series router.I want to terminate 230mbps link on this module.I found EHWIC-1GE-SFP-CU option but as per service provider it will not support to 230mbps link.

View 3 Replies View Related

Cisco WAN :: Does Updating IOS 15x On 2900 Router Require License

Mar 25, 2011

I have a Cisco 2921 router running c2900-universalk9-mz.SPA.150-1.M4.bin.Its licensed for    ipbase, ipbasek9, Permanent and uc,uck9,Permanent   (I'm using the router as a voice gateway),I'm looking to update the IOS to c2900-universalk9-mz.SPA.150-1.M5.bin as I'm told it has a fix for some DSP problems.So the question is, do I need to obtain a new license key to apply this update or am I covered by the existing license on the router.

View 3 Replies View Related

Cisco WAN :: 2900 Bandwidth Segregation On Router Interface

Aug 27, 2012

I have a requirement where 3 Branch locations of an organization is connected to their hub location via MPLS.They have an internet connection only at HUB as shown in the diagram (Attached)Now all spoke locations should access internet via hub.At spoke locations is there a way that I can have Cisco 2900 router and dedicate only 30% of the WAN bandwidth for internet browsing traffic.Remaining 70% should be used for accessing applications at hub.
 
For example if i have 5 Mbps Mpls port at spoke I want to dedicate only 1 Mbps for internet browsing traffic remaining should be dedicated for accessing the application at hub.How can we acheive this? Can it be done by using PBR and rate limiting?

View 2 Replies View Related

Cisco Firewall :: Allow Ping From Inside To Outside In 2900 Router?

Apr 7, 2013

I have a Cisco router 2900 with firewall, i need to know how can i allow the ping from self zone to outside zone, i trried to create policy from self to outside but i still didn't allow ping or tracert, i get that message when i try to ping from cisco router: "Unrecognized host or address, or protocol not running"

View 3 Replies View Related

Cisco WAN :: 2900 Series Router Ipbasek9 License

Mar 12, 2013

I have a brand new 2901 and I'm trying to work out what licence features I have. The output of show licence shows I have ipbasek9 feature and datak9 as EvalRightToUse feature. Is BGP included in the base feature? What will happen when the datak9 evaluation period expires?

View 1 Replies View Related

Cisco WAN :: MPLS For ISP Offers Managed Router 2900

May 14, 2013

I wanted to get some opinions on the topic above.  We are purchasing MPLS services from a large ISP and they offer a managed router option.  I will also have a Cisco ISR 2900 at each site running SRST for my voice system.  I have some experience with BGP and am not scared at all to support it if need be.  That said, I am currently looking at pros and cons of going with a managed router from this company vs managing my own.  Actually, I will manage my own regardless and would just plug it into the managed router.  My router is perfectly capable of handling the BGP protocol but I am hoping that I can get some opinions from all of you.

View 6 Replies View Related

Cisco WAN :: 887VA Attempting To Overwrite NVRAM Configuration Previously

Jul 28, 2011

I upgraded the IOS on my 887VA router which is not yet in service. The next day I did a cold boot and made some changes. Then, when I wrote them this warning popped up which seems to imply I need to recreate my configuration from scratch in order to avoid potential issues.Is that the correct interpretation of this message/scenario? [code]

View 2 Replies View Related

The Connection Was Reset Error When Attempting To Load Certain Sites?

Apr 11, 2011

Ok starting about an hour ago I seem to be having a problem accessing youtube as well as Facebook & now Microsoft?I have done some searching around and tried a few of the suggestions I found including; trying another browser (happens using both Mozilla and IE), clearing internet cache, unplugging my modem for a minute then plugging it back in, etc, and so far none of these have worked. I did get youtube to work once since then long enough to upload a 10 sec video but once it was uploaded and I tried editing the video details I once again found myself taken to the page that says The connection was reset.

View 3 Replies View Related

Stuck On Attempting To Authenticate - Limited Access On Internet

Jul 29, 2012

I can not connect to my wireless network from my pc. My laptop is fine. the internet worked like 5 times.. but it's been dead for two days now and everything I try seems to fail.i can see my router in connections, (sometimes not) And when i see it, it says limited acess and works for like10 mins..The OS is Windows 7 ultimate 64bit and im using a gigabyte GN-WB01GS USB WLAN card#2 network adapter. The signal strength is good. Ran all the windows trouble shooters... nothing, though it works wired. After clicking connect im told that it is attempting to authenticate forever and that is all that happens,I dont get why it works sometimes, then doesn't.when the internet works it have worked like 5 times (for 10 minutes) but now i cant even connect to it..Whenever i tried to download SOMETHING, it stopped working. And the internet i had those 5 times was were slow, not 54 mbit net. [code]

View 14 Replies View Related

Cisco WAN :: How To Configure Router 2900 To Support Connection From 2 Firewall

Jun 24, 2012

how to configure a router 2900 to support connection from 2 firewall ( Active Standby connections) How can i said the router to send the traffic to the stand by when it go down the active Firewall?I was planning to use a Switch ( layer 2 capacity only)  in the middle of the equipments ( between the firewalls and the router) in order to send always the traffic for 1 physical interface from the router side , and manage to route all the internatl traffic to the virtual IP of both Firewalls.Also i dont know yet how to configure a VPN site to site if i have that scheme  and some Publics NAT ( Firewall - Switch - Router ), i was planning to configure a NAT in the Router in order to allow the VPN traffic to internal IP of the Firewall but still dont know if it will work.

View 2 Replies View Related

Cisco WAN :: 2900 Router - Does Self Ping Works On Dialer Interface

Sep 11, 2011

I have the below configurations done on a 2900 router. [code]I would like to know, if the IP address assigned to dialer1 interface "20.1.2.133" would be listed in "show arp" ?, as it failed to list on our router and I want to know if this is an expected behavior ?
 
Secondly, does self ping 20.1.2.133 (dialer interface IP) work ? [code]

View 2 Replies View Related

Cisco WAN :: Router 2900 Unable To Access Any DSL Commands For ADSL2

Mar 24, 2013

When i enter configuration mode for ATM any DSL commands are not recognized. Believe i have the right IOS.

.ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"Last reload type: Normal Reloadversion 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!!no aaa new-model!
[Code] .......

View 2 Replies View Related

Attempting To Connect A Video Streaming Device To Wireless Network

Dec 22, 2012

I am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password

View 1 Replies View Related

Cisco Application :: 2900 Router WCCP Support For GRE Encapsulated Redirects

May 23, 2012

I've been looking around Cisco's website but I can't find an answer to this -- If the 2900 platform suppots WCCP redirection using GRE? 

View 1 Replies View Related

Cisco Switching/Routing :: Router 2900 Fail After Power Outage

Apr 22, 2013

I recently copied a configuration from a router 2800 to a 2900. After a power outage no one can connect outside of the network through the new router. Before the outage all was fine. I put back the old router and all is fine which eliminates any cable or switch error. I have the router totally disconnect. I notice the configuration is in place.  My question is there any diagnostics that I can run to see if there is any hardware failure. It seems to boot up fine.

View 1 Replies View Related

Cisco Switching/Routing :: 2900 - Multiple Default Gateways On One Router?

Apr 4, 2013

I have a small network that i want to setup, i have 1 2900 router and i'd like to create subinterfaces for the internal.  but more importantly i'd like to have the dsl modems connected to the router with traffic from one subinterface going through one modem and traffic from the other going through the other.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Service-Type Not Present Error When Attempting To Authenticate WLC 5508

Sep 13, 2011

I an currently running Cisco (ACS 5.2.0.26.3) and attempting to get my Cisco 5508 WLC's (7.0.98.0) loaded into ACS for TACACS+ authentication for managment users.
 
However I keep getting the following error:
 
*emWeb: Sep 14 14:44:45.931: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed for the user:test_tac. Service-Type is not present or it doesn't allow READ/WRITE permission.
 
Now I've attempted the step-by-step using the following URL but to no avail.( there are some slight differences in ACS 5.2)
 
[URL]
 
Latest WLC configuration guide I could find (Software Release 7.0 June 2010) isn't much useful either.

View 6 Replies View Related

Cisco Firewall :: Access-List Traffic Control Attempting To Block RDP 3389

Nov 7, 2012

I have an ASA pair configured to replace a router that hosts a collection of IPSec Tunnels.  Tunnels appear to work.  I am lab'ing some additional controls that I would like to implement.  On the Production Router that i plan to replace with the ASA's the current Tunnels are all wide open (all traffic allowed to pass).  I was hoping to lock things down a little without having to reconfigure all of the Tunnels.  My though was that an ACL on the Inside Interface blocking selected traffic Out (so into the LAN) should not impact the stability of the Tunnels but allow me to restrict some traffic from entering the LAN.  One port that I was attempting to block is RDP 3389.  When this ACL is applied to the inside interface it does not block Port 3389 at all.  What am I missing?  Is it that the trffic is being allowed because it is coming through one of my 'open' Tunnels? 
 
Shouldn't IPSec Tunnel traffic be processed by the Inside Interface ACL just like all other traffic?
 
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 3389
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 135
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 137
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 138
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 139
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 445
access-list 145 deny   tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 389
access-list 145 permit ip any any
 
ip access-group 145 out interface Internal
 
This work great on a 2821 Router, but not so much on the ASA.

View 11 Replies View Related

Cabling / Cards :: 1397 WLAN Adapter Showing Attempting To Authenticate?

May 3, 2011

I have been trying to re-establish my wi-fi connection for over a day now. I have a Dell Inspiron 1545 with windows 7 and it has two wifi adapters, one is the 1397wlan and the other is a virtual miniport adapter. My carrier is at&t uverse/2wire and my service was disconnected for about eight or nine days and since then I cannot get my wi-fi back. The desktop computer works fine but my network adapters are showing attempting to authenticate and not connected for the miniport adapter. I have tried enable/disable, restoring to a previous date, ipconfig/release, and of course running the trouble shooter for Microsoft. The result is that they can't assist with my connectivity issue and that its either the adapter or my router. I can use the laptop with the ethernet cord but its not practical as the router is downstairs and I primarily work upstairs.

View 2 Replies View Related

Zoom Adsl X6 Model 5590 - Internet Not Working After Attempting To Update Routers Firmware

Jun 21, 2011

I have a Zoom adsl x6 model 5590 wireless router. I recently tried to update its firmware by following the instructions from the manufacturers site. Everything seemed to go correctly, but I am now unable to connect to the internet or my routers http address. My router now has a red power light along with a solid green light for the wlan and dsl.

View 2 Replies View Related

Error Message W016.15isp When Attempting To Make Wifi Calls On T-mobile Mytouch 4g

Mar 13, 2011

Getting error message W016.15ISP when attempting to make wifi calls on my T-Mobile myTouch 4g cellphone. I currently have internet service with Charter which uses a cable modem/router.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved