Cisco WAN :: Does Updating IOS 15x On 2900 Router Require License
Mar 25, 2011
I have a Cisco 2921 router running c2900-universalk9-mz.SPA.150-1.M4.bin.Its licensed for ipbase, ipbasek9, Permanent and uc,uck9,Permanent (I'm using the router as a voice gateway),I'm looking to update the IOS to c2900-universalk9-mz.SPA.150-1.M5.bin as I'm told it has a fix for some DSP problems.So the question is, do I need to obtain a new license key to apply this update or am I covered by the existing license on the router.
View 3 Replies
ADVERTISEMENT
Mar 25, 2013
If you look at the data sheet for the 5512-X the High Availability section states "Not Supported; ActiveActive or ActiveStandby" while the ASA 5515-X states "ActiveActive or ActiveStandby". What does "Not Supported" mean for the ASA 5512-X? Does this mean HA does not work, or that I need to purchase an additional license to use the HA feature?
[URL]
View 5 Replies
View Related
Mar 12, 2013
I have a brand new 2901 and I'm trying to work out what licence features I have. The output of show licence shows I have ipbasek9 feature and datak9 as EvalRightToUse feature. Is BGP included in the base feature? What will happen when the datak9 evaluation period expires?
View 1 Replies
View Related
Feb 29, 2012
I faced some problems when updating the device packages on the LMS 3.2 server. Therefore, I really need device packages of switch 3750, router 2900 and router 3900 series. I had tried update online but could't view any devices.
View 1 Replies
View Related
Dec 18, 2012
i have 2921 router with base license . i want to upgrade to it to security k9 feature or want to enable it. i have license file with product activation key. how should i do it. if any body have screen shot file
View 1 Replies
View Related
Aug 25, 2011
If there is a router ISRG2 2900 with SEC license and without HSEC license, there is a limit in count of cumulative encrypted VPN tunnels of 225. Which commands can show us a number of current tunnels on the router, so we can see if we are near this limit of 225?
View 4 Replies
View Related
Feb 25, 2012
I am doing my college project(Client Server Chat Application in C#). I need to transfer all the data of my application through a VPN tunnel. I want to create a IPSEC VPN tunnel through which I can route the Data. I am low On budget I am not inclined towards buying any Hardware. So is it necessary to purchase a Router or a Network Interface Card To create A IpSec VPN.
View 3 Replies
View Related
Feb 22, 2013
I have a "Thomson TG585 v7" router I reset it and the default username is "user" and password is "admin". So after the restart I want to configure again the router so I click the "Set Up" option I click "Next" and then show me to enter again the username and password but they are not the same as the router username and password. What can I do?
View 13 Replies
View Related
Apr 8, 2013
How do I set my EA4500 to require a guest access?
View 1 Replies
View Related
Sep 28, 2012
I get this error when updating the IOS on our ASR 1002 router:
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated e581b06d:923b1cc8:e5497571:66f9de35:70fd0ac8
expected aedab318:d8f213f5:36e12355:f70fa900:5c12d08c
SHA-1 hash doesn't match
boot: error executing
Is there someplace where I can configure the expected SHA-1 hash?
View 1 Replies
View Related
Oct 30, 2011
I am currently authenticating wireless clients using PEAP User Authentication through a Cisco Wireless LAN Controller and Cisco ACS 4.2, which points to a Microsoft Active Directory external database. This does not keep users from configuring thier personal devices with thier Active Directory login information and connecting to the corporate wireless network. I can setup a client to use a certificate, machine authentication and user authentication, but I havent been able to REQUIRE the certificate and or machine authentication to authenticate to my wireless network.
>I now have the Windows External Database Configuration, ACS External Database setup with Enable PEAP Machine Authentication and Enable machine access restrictions. With the client configuration set to use Computer Authentication, it passes the authentication through ACS (and AD), but the client can also be configured for User Authentication and also pass authenticaiton. Is there a way to only require Computer Authentication through a Cisco WLCCisco ACS?
View 7 Replies
View Related
May 9, 2011
a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
View 8 Replies
View Related
Oct 16, 2012
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies
View Related
Apr 3, 2013
I’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
View 3 Replies
View Related
Jun 4, 2013
I would like to setup three Aironet 2602I-A-K9 WAP in my office. Being new to Cisco WiFi, it appeared that I HAVE to have a WiFi Controller to make this work. Is that a requirement that requires me to also purchase a WIFI controller?
View 4 Replies
View Related
Jun 21, 2012
Remove PPPoe settings on Vista. I uninstalled the att software but the pppoe settings remain and my computer says my network is unidentified and will only allow local connection. My XP computer had no problem making the change but the Vista one keeps saying it is an unidentified network. I have tried turning everything off and then restarting the cable and then the computer but it does not work. I have a wireless adapter and can connect the Vista machine to the network with no problem but need a wired connection for games I play so I need to fix the wired problem. I am sure the settings the ATT software changed is the problem but I don't know how to get into the system to fix the problem. There is no router involved. The router is built into the cable modem.
View 5 Replies
View Related
Feb 26, 2013
I recently formatted the flash drive of an 1800 router and replaced it with an updated image. However, the new features within the new image aren't reflected in the router. I believe that this is because a reboot would be required for the updates in the new image to be reflected in the router i.e. the image needs to be added to the system. How to get the image to the system without a reboot and if by doing so I would get all the new features from the image.For example, the show version below shows the old image in the system as [code]
View 2 Replies
View Related
Feb 9, 2012
I have a small office with about 20 people. I currently have a T1 line which feeds a Cisco ASA 5505. I would like to replace the T1 line with two (2) ADSL lines. I need a dual WAN switch/load balancer. I researched a bit and found that Cisco RV042 will probably work for me even though I don't need another VPN and would have to disable it.
My question: Is there anothe device from Cisco or others which will give me the dual WAN and load balancing but not the VPN piece. My assumption is that it would be a less expensive device if such an animal exists.
View 2 Replies
View Related
Nov 29, 2011
I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies
View Related
Jul 8, 2012
I recently purchased two x3000 devices.Both shipped with the 1.0.01 firmware installed.Upgraded one device in one location to the 1.0.03.001 release without issue.A day later i'm not trying from a second location to perform the same action.I've downloaded the FW_X3000_1.0.03.001.bin firmware from the Cisco downloads for the device and receive a pop up 'The image file is incorrect'.I've downloaded hte image twice and it appears to be correct in size. I'm following the same process that worked without issue the day previously.
View 3 Replies
View Related
Oct 26, 2011
Since firmware 1.0.3 it seems my DDNS is not updaing with DynDNS since the last update.
View 2 Replies
View Related
Nov 4, 2011
i successfully configured my befsr81 router hardware version 3.1 with a dyndns hostname account. how often is it supposed to update? it doesnt seem to update till i login to the router through my browser. where is successfully updates. is there a way to choose how often it updates?
View 2 Replies
View Related
Jun 29, 2011
For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies
View Related
Feb 28, 2013
When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
View 9 Replies
View Related
Sep 6, 2012
I have DSL 8Mbps DL and 768kbps UL The setup look like this:Internet -> Modem -> Cisco Router -> Firewall -> Switch Core - > Multiple switches like sfe2000p? CiscoRouter: i use port gig0/1 for PPPoE and i use port gig0/2 for LAN static Router port gig0/2 with 122.54.144.153/29 connected directly to Firewall port13 with 122.54.144.154/29 ?i want 122.54.144.153/29 will my default gateway ? include no limit bandwidth,filter etc at router, Firewall will be DHCP Server and control the bandwidth, filtering etc and the client computer should get 8Mbps
Mode: Routing
Encapsulation: PPPoE
Username: xx
Password: xx
Service Name: ISP name
[code]....
View 9 Replies
View Related
Apr 30, 2012
Any way to disable the usb console port on a 2900 series router?
View 2 Replies
View Related
Jun 26, 2012
does wireless internet require a cable connection
View 2 Replies
View Related
Jun 21, 2012
I configured dmvpn at cisco router 2900. one hub router and 3 spokes. all of them are working normally but tomorrow i see one error at at one spoke router.
error:
Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license
View 1 Replies
View Related
Jul 7, 2012
I know that Cisco Cloud Connect was released fairly recently. I also know that the e4200v2 was supposed to be a supported router from last generation for Cisco Cloud Connect. However, when I go to the upgrade firmware option on my router settings, it says that I have the most up to date firmware.
How do I get CIsco Cloud Connect setup on my e4200v2? Would I simply follow the manual install instructions for the ea4500 with the firmware for the ea4500?
I'm hoping that the updated firmware will fix an issue I'm having with getting a Seagate Expansion hard drive detected for the media server portion since I know a closely related hard drive was in the list of functioning external hard drives for the Cisco Connect Cloud firmware.
View 6 Replies
View Related
Mar 13, 2011
We have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
View 6 Replies
View Related
May 28, 2012
I understand that the PCEX-3G-HSPA requires and a sim card. I also have a PCEX-3G-CDMA-V. Does this require a sim card as well? And if so, where is the sim card installed?
View 1 Replies
View Related
Jul 3, 2012
I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies
View Related
May 15, 2013
I just updated the firmware on the WNR1000v3 router. However all the port forwarding configs that were set up previously have become "ghosts". They do not show up on the list nor work, but I cannot add a new entry.
View 2 Replies
View Related