Belkin F5D8633-4 - Set A Static Ip Through DCHP?
Feb 6, 2011
basically i have a belkin router that for some reason when port forwarding requires the ip adress of the computer instead of applying it to all of them. and it keeps switching my computers ip for no reason which means the ports ive forwarded have become useless. i was originally at 192.168.2.3 now im at 192.168.2.8
or a better solution would be is there a way to apply port forwarding globally on belkin routers?
i have the the Belkin F5D8633-4 show here [URL].
View 2 Replies
ADVERTISEMENT
Apr 24, 2013
I need power supply for N wireless modem router F5D8633-4. It says 15v 0.8A on the router but I can only find 15v 1A available on the internet.
View 2 Replies
View Related
Dec 26, 2011
what if I don't "have disk"?
View 3 Replies
View Related
Feb 26, 2011
Trying to add my Toshiba Laptop to my already exsiting D-Link 524 wireless router. However whenever I try to change my DCHP to enable, it won't save the changes. I have tried both the Dynamic and Static IP Address, and it will say saving changes, but when I return, all changes are gone. On the cmd prompt when I type in ipconfig /all it lists DCHP enabled.
View 1 Replies
View Related
Nov 13, 2011
One of the persons in our company wants to have a phone at his home....(not Cisco) as well as connectivity to servers and other resources at our office. There's talk of using an existing RV042 our office and placing another at the person's home. The office has a static IP address from our ISP, but at the person's home, it will be DHCP from the ISP.
View 4 Replies
View Related
Feb 29, 2012
I have a DIR-615 Rev. A1, and i'm trying to set up a DCHP reservation. Whenever I try, I get an error saying my MAC address must start with 00. I'm running Firmware 1.10.
View 1 Replies
View Related
May 15, 2013
I have a WRT110 and a Vizio smart TV - just changed internet providers to NuLink to get a Mbps line - previously had AT&T DSL 1.5 - when tech power cycled router every laptop and smartphone in the house connected with no issue - TV did not connect (it was on during time tech was doing install) - attempted to connect with password, failed to connect multiple times - sometimes message 'DCHP connection not available' message was displayed - called Vizio, 1 hour and 9 minutes of troubleshooting with no success, according to Vizio tech all settings on TV good recommended I contact Lynksys and ask them to ' check 2 ports - port 80 and port 446' - also advise 'connection is autopopulating to 101' - I believe he was referring to the IP address request - router set to WPA2 personal - note that when I first got TV 3 months ago I was able to connect to router no problem, but I do not know if TV had connection the day we switched internet providers. I do have 2 fixed IP addresses entered an one of them ends in '101' - I do not know if that is significant or not. The main reason for the internet switch was to get the TV online, disappointed that I could not get it done.
View 3 Replies
View Related
Jul 7, 2012
i have several cisco 3500XL switches with trunking. I created a VLAN lets say 20 which purpose is for wireless clients. I installed wireless controller with 4 APs and controllers sees all 4 APs. Controller is also DCHP server. When wireless client authenticates it's DCHP requests in not getting to DHCP server (controller). If i connect all equipment in non managed switch everything works.
View 10 Replies
View Related
Sep 11, 2012
We have a number of 6509s which generally have dhcp relay agents configured on the SVIs. The dhcp servers are centralised. Recently we've had one or two faults with misconfigured or faulty devices (blade server chassis and also printers) generating high volumes of dhcp discover packets and causing high cpu on the relevant 6500. I would like to rate limit these discover packets, which are layer 2 broadcasts. Storm control can't discriminate between different types of broadcasts and on a gig link would need to be set down at about 1% to have much effect on the problem. I've looked at CoPP and also mls hardware rate-limiting but as I understand it, these two features don't control broadcast traffic. I also looked at dhcp snooping but if an interface receives a high level of dhcp discover broadcasts, e.g. over 100pps, I don't want it to go error-disabled (as this would knock down the whole edge switch), just to drop the excess packets.
View 2 Replies
View Related
Jul 15, 2011
One of the many things that I liked about the e4200 over my olg 54GL was the fact that I could reboot it remotely. However, I've recently had a few problems that only a full power down would fix. In addition, I've noticed that the DCHP client table doesn't reset when I do a soft reboot. Is this intentional? Is the soft reboot not really a full reboot? Can it be made a real reboot?
View 7 Replies
View Related
Mar 12, 2013
Today I installed the 1.0.2.6 Firmware on a RV180W. I only have now two problems regarding the Static DHCP support in the GUI.
1. Via the Networking > LAN (Local Network) > Static DHCP I have no buttons to Add a new static Lease.
2. Via the Networking > LAN (Local Network) > DHCP Lease Clients I can thick a Lease and click on Make Static IP. The result is an error: Operation failed.
View 3 Replies
View Related
Jul 26, 2011
I've been having a problem with setting up static dns 3 on my WAG, what has been set is...
Static DNS 1: 208.67.222.222
Static DNS 2: 208.67.220.220
Static DNS 3: 208.67.220.222
Now if I look in my router status screen 1&2 are correctly displayed but the 3rd entry is showing my ISP's DNS,
View 9 Replies
View Related
Apr 26, 2013
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies
View Related
Apr 26, 2013
How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies
View Related
Mar 29, 2011
When using pppoe, my router won't obtain DNS, but i have heard from the past owner that you have to set it up manually. I simply can't find the screen in the web interface. Do i need to telnet it?
View 1 Replies
View Related
Jun 17, 2012
pool of static IP given by ISP, i want to run my web server,whats the best way to configure my web server behind router and assign Static IP for it. i will use static ip for router or web server??
View 5 Replies
View Related
Jan 29, 2013
Okay so I currently have an ISP that offers the standard "2 Dynamic IP's" and I'm wondering how to utilize this? The tech guy said I need a HUB...but I'm not sure what kind and where to get one etc. Secondly, even if I am able to get this second IP going, will they be entirely separate IP addresses? I need the IP addresses to be completely separate and untraceable to the same source. Is this the case or can you somehow trace back the two dynamic IP's to the same source IP? Will I need two different static IP's if I want the two connections to be entirely separate, unrelated, and untraceable from each other?
View 4 Replies
View Related
Sep 19, 2011
I have a Cisco 870, my isp has given me a static IP I have set the wan interface to be static and have set the dns servers, but whenever I do a connectivity test I get and error:
"To test connectivity Cisco cp tries to ping the configured dns servers, however there is no configured route to any of the dns servers through the selected interface"
Recommended actions: "select user specified option or add a host specific/network specific default route thought this interface"
There was no place for me to put in the default gateway, should I be able to put that some where? What do I need to do to get the internet working?
View 3 Replies
View Related
Jul 7, 2011
I have a LAN at home sitting behind the router (Linksys WRT54G). The IP addresses assigned to the Linux boxes are
192.168.0.101
192.168.0.102
192.168.0.103
The Router is also connected to the modem provided by my ISP, to access the internet. Now, the router is assigned the IP address 192.168.0.1 and is also configured to start assigning IP addresses starting from 192.168.0.100 using DHCP protocol.
Now I have an application which requires to have FQDNs (Fully Qualified Domain names) for like each machine - something like
phx1.mylocalnet.com
phx2.mylocalnet.com
phx3.mylocalnet.com
View 4 Replies
View Related
Mar 16, 2011
I’m having trouble with static nat on my Cisco 861. The dynamic nat is working fine, but I can’t seem to find the problem with the static one. [code]
View 10 Replies
View Related
Apr 14, 2011
How to set static IP of Inter net in one NIC and another NIC LAN IP how to set.After setting up Static IP we should use our webmail server and ERP works external.
View 1 Replies
View Related
Jan 8, 2011
I have 2 computer connected and both have dynamic IPIf I change one of my computer's IP from dynamic to static Will it be okay to another comp ? ( Can it still connected to Internet / LAN )
View 1 Replies
View Related
Jul 13, 2011
I have an application for my client's company. Their clients should post the request from outside thru internet. for that we have bought a Static IP. And now i have to configure that static ip to access the application from outside.what is the procedure for that?
View 1 Replies
View Related
Feb 7, 2012
I have a Blackberry Playbook and have come into a problem with it.I can't set a Static IP on it so would setting a DHCP Reservation in my Linksys E2500 router act as a static IP?
View 2 Replies
View Related
May 20, 2011
I posted of an issue we were having but I feel like I was getting ahead of myselfBasically I need to know how to do 2 things.I want to assign a static IP I purchased from Comcast to my Netgear N300 router and then in turn want that IP address to be linked to the server here in our office so that when people use the Remote Desktop Connection it directs them to the proper machine.
View 5 Replies
View Related
Apr 4, 2012
I've got a device that is not strictly speaking a 'desktop computer', but I communicate with it over the network - it's a video switcher, I use it for broadcasting.I'm trying to set it up with a static IP on my larger network, rather than just a local one, but in order to do that, it needs a static IP, and my network is setup with DHCP.I can assign it a static IP if I can get it's MAC Address - but there's the hitch.It's nowhere on the device itself, on the box, in the instructions.I ran "arp -a" in the console and found the IP it's currently assigned to, and the MAC address associated with that is:
7c:2e:d:0:68:ad
But that doesn't seem to be standard format. The :d: should have another character in with it, as should :0:
How can I convert this to standard format?
View 1 Replies
View Related
Feb 1, 2011
I�ve assigned the static IP to Server, but when i go back to network properties it show Obtain IP address automatically, however, network working fine with previously assigned IP.
View 2 Replies
View Related
Jan 12, 2013
i need to change from dynamic IP to Static for work, Iv rang my provider talk talk and the only way i can do this is go to a buisness line and pay more a month is there anyway i can log into my router and change from dynamic to static myself? im not on about the IP thats starts 192.blah blah blah its the one where u go somewhere like whatsmyip.com mine is dynamic as it changes if router is reset, there is hiccup in internet or computer is off for the night etc...
View 2 Replies
View Related
Feb 21, 2013
My modem is D-LINK WBR-2310. I am trying to set up a static IP for my Xbox 360, but am unable to. I have tried assigning it IPs from inside/outside my DHCP range, and nothing works. Every time I assign it a new IP, I forward the port in my router. My modem is an Embarg EQ-660R, and is bridged. My 360 is set up wired directly to my router (the only wired item I have). Every time I test the connection after forwarding the port, it (my 360) errors out at the first step of connecting to "network". I've searched the interweb to no avail trying to find an answer to this problem. I'm putting the IP address of the IP I choose in the port forwarding rules, this is correct, yes? General port forwarding question: What port are you supposed to choose for different games, say Battlefield 3, that I play on my PC? Is the port I choose in my router settings supposed to always be the IPv4 address within IPconfig?
View 2 Replies
View Related
May 25, 2012
I need to set a static IP for port forwarding so my clients can connect directly to my server. I kept losing people because my IP address would change every week. I use version MI424WR router and know my Mac address but do not know which IP address I should set it to.
View 6 Replies
View Related
Jun 30, 2012
I have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies
View Related
Apr 4, 2013
I have recently purchased one of the new ASUS RT-AC66U routers and this router comes with the new aicloud feature. This feature allows you to remotely connect into the router and access any external drive attached as well as your computers shared folders.My issue arises due my location. I live on a school campus and with this being the case, setting up an IP address that is static and is available from everywhere is not really possible. I have my router which I can setup with a static number but the school breaks theirs down so mine will never stay that way.I am trying to see if there is a way to make an address static using an update feature or something of that nature to constantly have a new IP when mine changes.
View 2 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
