Belkin Routers :: How To Configure F57230-4 (802G) Wired To FIOS 802N
Dec 28, 2012how can I configure a belkin f57230-4 (802G) WIRED to my FIOS 802N router/modem?
View 1 Replies
ADVERTISEMENT
Linksys Wired Router :: RV042 GW To GW VPN Using Verizon FIOS
Aug 18, 2011I have never setup a GW to GW VPN with a FIOS connection. I have done it with DSL and cable without any problems.
View 1 Replies View RelatedBelkin Routers :: Sub Netting N150 With Each Wired Port
Dec 10, 2012Can any of the wired/wireless routers like the n-150 be sub-netted with each wired port being its own subnet?
View 1 Replies View RelatedBelkin Routers :: F6D4230-4 Wired Connection But No Wireless Through Comcast?
Apr 28, 2013I have xfinity internet with a comcast rented modem connected to a personally owned belkin router. I can successfully connect to the internet directly from the modem or if I connect to the modem to the router and then to my computer via ethernet cable. I cannot for the life of me connect wirelessly with any devices. The router previously worked when it was hooked up to comcast internet, but it was moden->router->my router. When I connect wirelessly on my Windows 7 laptop, it says I connect and that there is internet access. But when I try to load a page it takes me direclty to this website: url.. Comcast says that it is my router that needs configuring properly with xfinity and wants to charge me $39 to provide this wonderful service.
Router: Belkin Model F6D4230-4 v1 with firmware F6D4230-4_WW_1.00.03
Modem: Comcast Model RCA DCM425
Belkin Routers :: Use / Configure F7D8301 As Repeater?
Jan 8, 2013I just got UVERSE and they supplied a new router (or is it a gateway) and my F7D8301 is excess to me. Is there a way to configure the Belkin router as a repeater?
View 1 Replies View RelatedBelkin Routers :: Configure PPPoE On A F9k1110?
Feb 28, 2013One of my customers has a new f9k1110 and we need to configure PPPoE on it to get him logged in.
How do we access the router configuration?
Belkin Routers :: N150 Fast Wired / Ultra Slow Wireless
Mar 5, 2013I bought my own modem, a Motorolla Extreme something or other, is a DOCSIS 3.0. My router is a Belkin N150. When I plug my desktop computer directly into the router, I get speeds upwards of 50Mbps. The wireless, however, gets about 0.15Mbps download, but as much as 12Mbps upload.
I know it's not computer specific, because I plugged my laptop directly into the modem and got the full speed. AND I put a wireless adaptor on the desktop and got the slower speeds.I live in a densely populated area and there are 27 other (visible) wireless networks available (all locked, unfortunately. Otherwise I wouldn't be in this situation in the first place). So I tried every channel, doing a speedtest with each, and I got almost identical results each time: 0.12-0.17Mbps download, 11-13Mbps upload. I can't imagine that getting only 0.15Mbps could be a result of a channel being clogged, but I tried it anyway;
Belkin Routers :: N750 - Wired Connection Can Ping But No Internet Access
Mar 30, 2013Belkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
View 3 Replies View RelatedBelkin Routers :: 300N - Access WAN Via Wireless While Firewall Wired Computers?
Dec 15, 2012The facility provides WiFi access. I'd like to configure his router to access the facility's WiFi, as WAN access to the internet while providing DHCP service to the wired ports. The idea is to use the 4 wired ports to provide inter-connectivity to each other and internet access via the router's wireless connection via wireless for internet access by the wired client machines.I'd also like to firewall the wired devices from access by other users of the facility Wireless network.Can I do that? How do I configure the wireless aspect of their Belkin Share 300N? What other settings do I have to set.
View 2 Replies View RelatedDell :: Lost Wired FIOS Internet Connection XPS 435t/9000 Unable To Restore
Aug 17, 2012Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
Belkin Routers :: AC1200 Incompatible Cable Modem To Configure
Mar 9, 2013My Comcast cable modem does not have a 2nd port needed to connect my Belkin AC1200 wireless router. Is there another way to configure this or are my options to either buy a new cable modem or try to upgrade it through Comcast?
View 1 Replies View RelatedBelkin Routers :: To Configure N900 To Allow Access To Computer From Outside Network
Feb 12, 2013I need configuring my N900 router to be able to use Microsoft's Remote Desktop Connection to get into my computer from a client's location. I also want to be able to host websites I'm developing so my clients can see the changes before publishing to their website. I have not been able to find anywhere what settings to set to what in order for these two things to be available to me.
View 2 Replies View RelatedBelkin Routers :: How To Configure N1 Vision Modem Router To Use Back To Mac
Feb 20, 2013How can I configure Belkin N1 Vision Modem router to use Back to My Mac? Bcos in iCloud preferences its give me a error message "setup router for better performance"
View 2 Replies View RelatedBelkin Routers :: Configure N300 As Access Point - Unidentified Network?
Nov 9, 2012As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".
My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.
How To Network Two Fios Routers
Aug 31, 2011I had Verizon install an additional router since I have expanded my CAT5 lines in my home. When the tech installed the second router her told me I had to network them otherwise I would have issues but he couldn't do it because he did not know how.
View 2 Replies View RelatedCisco Routers :: Setting Up RV180 With Verizon FiOS?
Jun 7, 2012Looking for setting up the RV180 behind the ActionTec MI424WR-GEN2. At the same time I want to be able to VPN into the network and be able to access objects.
Ideal setup:
Verizon ActionTec modem is primary network (192.168.1.x)
RV180 is secondary network (192.168.2.x)
VPN to 192.168.2.x network from remote locations (client-to-gateway)
I've tried asking from Cisco Support and was given the "we don't suppor that configuration" line. They want me to put it in front of the ActionTec FiOS modem/router in which case then Verizon will provide zero support for anything.Now, to add an extra twist, I do have STBs (Set-Top Boxes) connected to the Verizon FiOS modem/router but nothing special (i.e. no DVR or any stuff like that). How to get this thing up and running so that I can have remote folks VPN into the network? We work with data that needs to remain encrypted during transmission, hence the VPN.I have forwarded ports 443 (TCP), 60443 (TCP), 500 (UDP) and 4500 (UDP) to the WAN IP of the RV180. Network objects behind the RV180 cannot get past the router (it's in router, not gateway mode). The RV180 can ping objects both on the WAN and LAN side, so it seems that the RV180 is the problem child.
6300 Verizon FIOS Change To Other Wireless Routers?
Jul 3, 2011i am using verizon fios. It's pretty fast, in fact I just did a speedtest and here is the result.But I always want more. My laptop has Intel 6300, which supports up to 450Mb. But the Actiontec MI424WR only has 54Mb. It has nice features, but it uses MoCA and connects over coaxial cables, making it unnecessarily harder to use my own router. So I searched online and found tut about how to set the actiontec as a bridge and use your own router.
1) Wouldn't that lower the speed of the router of my choice? Say if I get a 450Mb router, but I need to connect it through the port on the Actiontec, which iirc is only 100Mb. Shouldn't that mean that the new router is forced to operate at only 100Mb max?
2) What is FIOS' top speed? I'm not even sure if it can go up to 450Mb.
3)I have no problems with this Actiontec currently, the only thing I'm looking for is more speed. Has anyone tried calling Verizon and see if they could switch the connection from coax to CAT5?
Cisco Routers :: RV220W Losses WAN (FIOS Internet) To LAN Bandwidth
Sep 24, 2011I Just got FIOS internet at Home with 43 Mbps down and 32 up (measured speed). I replaced the included router with my old reliable RV042 (V1) VPN router that I used with my old service in NY LI. This has been working very stable for week or two, but I use my old 042 to remote desktop via VPN from my work, that was limited to maybe 9-10 Mbps (Home to office) way down from the 32 up I have now (the office has 80Mbps down). So I researched that the RV220W had a VPN speed that was much faster and I ordered one that I am trying this weekend.Out of the box, I plugged accessed and just clone the MAC at the WAN port to match the replaced FIOS router. Power cycle and surprise, no IP from FIOS!. After trying a number of things, I gave up and updated the firmware to the last 1.0.2.4, and that fixed this. I still need to clone the MAC to void calling Verizon FIOS, but at least I get IPs and Internet with no trouble.Next, I configured a couple forwards for two web servers. I found about the bug in this same forum and just used the rules instead. Working good so far.
So now I test WAN bandwidths, and I found all kind of trouble. With the old RV042 and similarly to the included Verizon router I can do steadily 43d/32u. Especially at night is quite stable in these numbers. When I went and move the cables to the RV220W (exact same set up) the speed went all over the map from 4d/8u to 43d/25u. If I power cycle the box, things tend to be stable again around 43d/25u. So, after a while being stable in these numbers I start trying things to improve the 25u that should be around 32u, and recover the missing 7 mbps. Not much I can think, so I just randomly enabled the QoS settings trying to reserve full BW for my tests, and I found just that enabling WAN QoS, and nothing else, no profiles or changes in the Priority Settings, I go up to 30u consistently over a number of tests. This do not affect the down speed that is stable at 43 mbps. The surprising thing, is why this affect to the up speed when nothing else is going on in my network? and also where are the other 2 Mbps to complete the 32 Mbps that I can do with the RV042 (V1) or the cheap included router? In my opinion, if I don't use QoS, I should get full bandwidth to whatever application/computer that requests so, period.
Belkin Routers :: F5D9230-4 V5111 Belkin G Mimo Firmware Latest Version?
Apr 26, 2013(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedBelkin Routers :: Setup Belkin F7D1301 With A 16 Port 10/100 Switch?
Apr 26, 2013How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View RelatedLinksys Wired Router :: BEFSR41 Two Wired Routers In Non-standard Hookup
Sep 14, 2011I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off). All computers and other devices connected to it are manually IP configured. I desire to add a device that cannot be manually configured, and needs DHCP. I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network). The new device needs two-way internet access, but doesn't care if it sees any other current network devices. I've tried several configurations, none seem to work.
View 3 Replies View RelatedNo Wired Connection On Belkin Router
Apr 20, 2012I can get my new PC to connect to my router wirelessly, but not with a wire. I don't get a blinking green light on the ethernet port, but only a continuous orange light. With wi-fi, the PC gets through, obtains an IP address, it's not being blocked on the MAC address.Now, I have the following reasons to think the problem is in the router:
- It's not only my new PC I can't connect with a wire--any other device, Mac or PC, doesn't work, but works with wi-fi;
- my old PC connects fine with a wire. I'm using the same wire, on the same Router port when trying with the new one.
Limited Or No Connectivity Via Wired LAN - Belkin DB N600
Jul 19, 2011I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
Setup A Wired Ethernet Connection To A Wireless Belkin Router?
Feb 24, 2011I'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
View 5 Replies View RelatedN600 Belkin Router - Wireless Works But Wired Doesn't
Dec 25, 2011I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.
View 9 Replies View RelatedHow To Configure Belkin Guest Router
Nov 21, 2012I have belkin n750 router. I cannot get the guest network to connect to internet. The Main one connects to internet. How can I solve this problem?
View 1 Replies View RelatedBelkin Wired Ethernet Router / Losing Connection With Online Games
Nov 3, 2011I've recently replaced my router with this Belkin (F5D7230uk4) Router, (this one without the wireless reciever Whenever it's used for online gaming, either on my computer, my playstation 3, or my brothers computer the router will lose connection after about 5minutes, then return within about 30 seconds. This happens every single time without exception, and have not been able to play for longer than 10minutes on any occasion since changing the router. I've tried connecting straight to the modem and it all functions correctly with no problems, so I am certain that it is something that needs to be setup with the router. I've searched many forums and posts from people having similar problems, and followed instructions to disable router firewall, disabled UPnP and NAT etc with absolutely no success whatsoever.
View 1 Replies View RelatedD-Link DES-1008D - How To Configure Wired Router
Oct 11, 2011I had got a internet connection from ISP.
The etho mode is 10 mbps half duplex.
i have a router of dlink DES-1008D (wired switch ).
I want to configure a home wired network so I can connect my multiple system .
My ISP requires to configure me static ip in the ip configuration .
They have given us
IP address x.y.z.a
subnet mask 255.255.255.0
Default Gateway x.y.z.1
and DNS server name's
Now what settings I need to done to use my router ?
Routers / Switches :: Smurf Attacks On Belkin Wireless Routers Reply?
Jan 2, 2013If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies View RelatedHow To Configure Wired Network Along With A Wifi Internet Connection
Mar 23, 2011I have a laptop connected to internet via a router using WiFi.My desktop computer doesn't have a WiFi connection. I want to connect my laptop and my desktop computer using an ethernet cable in order to access the internet on my desktop computer. I've been fiddling around for over two hours with no luck so far. Both computers are on Windows 7.
View 3 Replies View RelatedLinksys Wired Router :: How To Configure RV016 For Two WANs
Apr 13, 2011how to configure Linksys RV016 for two WANs (cable+DSL)? It looks like switching between those two connections not splitting what is set for WAN1 and what is set for WAN2.I set load balancing as- WAN1 (cable) all HTTP up/donw should go there- WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP up/down should go therebut looks like is not working that way.When I will go to speedtest.net and test a connection I always get less amount then connected directly through cable : Also when people try to use any session or IP sensitive web site it doesn't let them to log in because session was expired (based on IP) or IP was changed.
View 1 Replies View RelatedBelkin Routers :: N600DB - Cannot Open Routers Homepage
Mar 21, 2013I have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
View 1 Replies View RelatedBelkin Routers :: N300 - Connecting 2 Routers In Series?
Dec 29, 2012I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View Related