D-Link DES-1008D - How To Configure Wired Router
Oct 11, 2011
I had got a internet connection from ISP.
The etho mode is 10 mbps half duplex.
i have a router of dlink DES-1008D (wired switch ).
I want to configure a home wired network so I can connect my multiple system .
My ISP requires to configure me static ip in the ip configuration .
They have given us
IP address x.y.z.a
subnet mask 255.255.255.0
Default Gateway x.y.z.1
and DNS server name's
Now what settings I need to done to use my router ?
View 1 Replies
ADVERTISEMENT
Feb 9, 2011
How I do it? I know nothing about this stuff... I can't open the ports.
View 1 Replies
View Related
Apr 13, 2011
how to configure Linksys RV016 for two WANs (cable+DSL)? It looks like switching between those two connections not splitting what is set for WAN1 and what is set for WAN2.I set load balancing as- WAN1 (cable) all HTTP up/donw should go there- WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP up/down should go therebut looks like is not working that way.When I will go to speedtest.net and test a connection I always get less amount then connected directly through cable : Also when people try to use any session or IP sensitive web site it doesn't let them to log in because session was expired (based on IP) or IP was changed.
View 1 Replies
View Related
Nov 6, 2011
I want to use my old BEFSR81 as a switch only and for whatever reason it doesn't seem to allow me to do that.I've disabled DCHP but I don't see a way to disable the router. Is there some trick into using this router as a switch?
View 1 Replies
View Related
Apr 7, 2010
I need to be able to offer Remote Assistance to my mother who is now a good distance away. She has my old XP computer running Windows XP Professional. I'm running Vista 64-bit home premium. We are both using BEFSR41 routers as she wanted to buy what I had been using when I lived with her.
I'm able to get a sesion working between a virtual PC computer running XP Pro on my LAN, but I can't get it to work over the WAN connection (internet). All I can find researching what ports to open is port 3389, which I tried 3 different ways to try to open. Ant correct set up and connection procedure to allow me to receive invites for remote assistance via the internet? I can't send invites either, I tried it just for the heck of it. I'm not sure if this is a NAT problem or a problem with the ports not being opened. Changing from DHCP to static had no effect, and there is only one computer that uses DHCP as I set up the old ones to use static when learning about networking and never changed them back.
Here are some censored screenshots of how my router is configured. I apologize for censoring them, but I don't want to reveal what other ports are open on my router or the configuration of my LAN more than necessary. I don't have any other Windows computers available on my LAN for testing that support Remote Assistance, but I do have an old Win98SE computer. Mom has my aging XP computer for e-mail, web browsing, Office 2003 and that's about it.
[URL]
View 5 Replies
View Related
Mar 12, 2011
I have to buy a VPN router. I'm thinking in the BEFVP41L . The problem is that in to sites to connect the VPN tunnel I have dynamic IP. It's possible to configure this router using DYNDNS domain?
View 1 Replies
View Related
Jan 25, 2012
My client has a DSL modem and a Belkin wired 4-port router configured to connect to it using PPPoE. Apparently there is no way to configure the E2500 such that it may be dropped in as a direct replacement for the Belkin (which would also provide wireless access) without the PPPoE login/password (from the DSL provider, Verizon).
I would like to connect the "Internet" port of the E2500 to one of the Belkin's 4 ports, in order to use the E2500 for wireless internet access without using any of the 4 wired ports but I think this creates a NAT within an existing NAT network?
To avoid that if I configure the E2500 in wired bridge mode, it becomes transparent, and I can no longer access its administration interface using the address 192.168.1.1 (since that address belongs to the Belkin). How may I, for example, change the wireless password which the E2500 is in wired bridge mode?
View 1 Replies
View Related
Jan 10, 2008
Is it possible to configure two AG241 adsl routers back to back via two wire line as a Lan to Lan network?
View 8 Replies
View Related
Jun 7, 2012
how i can configure the Cisco RV042 to access PPTP VPN Server (Witopia VPn) or other vpn servers.
View 1 Replies
View Related
Jul 18, 2011
I have had my DIR-825 for a year and half. My computer that is wired directly to the router keeps losing the connection to the router - unable to obtain an address. All of my other devices (that are connected via wireless) still hold the connection with no issues. I've checked the cable, unplugged/plugged back into the router, and it shows connection on the network card on the back of the computer.I have used the system interface to ensure the address is a valid one. I have powered up and down the computer multiple times and have also powered down and up both the router and the cable modem.
View 1 Replies
View Related
Apr 15, 2012
Upstairs I have my internet coming in with a Comcast modem/ router ( I will be bridging this b'cuz it sucks as a router). Also, I have my Dir 655 upstairs that I will use for wireless. and I have my dir615 downstairs and I want to use it as a basic switch/wired router. How do I set up my dir615 as a switch/wired router?
View 1 Replies
View Related
Apr 4, 2012
I have a wireless router (TP-Link) which I want to use to extend my wired dorm room cable connection.The "blue" network cable currently goes straight into my laptop and I have no control over its configuration.Is it possible to plug the blue cable into the WAN port of my router and then wire the computer back into a LAN port?BUT that's not really the major problem. Mainly I would like to know how the router must be configured to allow me to use other wireless devices in my room (phone printer etc).Someone told me that I "just" need to use the "bridge" setting but that turned out to be complicated by warnings and messages about other SSIDs.Is "bridge" really the right mode? It seems it's for connecting two wireless networks together.
View 4 Replies
View Related
Jan 23, 2012
when using Windows 7 network map, there is a "Unknown" with a question mark on the map between my wired pc and the router.
View 10 Replies
View Related
Sep 1, 2011
got the DIR-655 for gaming not knowing about LAN and WAN can any tell me if i can config this router to work properly with my broadband i have ONT that the router connects to
View 1 Replies
View Related
Aug 12, 2012
I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
View 14 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Sep 27, 2012
I have a Ubiquiti radio link between my DSL modem and RV082 router and although the router log states that it is connected to the static ip address of the modem i get and NSD fail and have no connection. if I plug the radio link directly into a computer with the static ip I get a connection but the modem has a problem with it.
View 1 Replies
View Related
Mar 29, 2013
Every so ofter, the switch of the router just stops moving traffic between the LAN and to/from internet, though the WiFi keeps working and can still use internet.
I can still use the router's switch, and ping other computers on the local LAN, what happens is that the router stop routing wired traffic from/to internet, the rest of the issue is still the same, I opened reddit on my smartphone and there it was working via WiFi, but the would have none of it for the computers on wired LAN, not even accessing the router's page or telnet.
It is like some service or bridge between the switch LAN and the router itself dies... I'm still clueless.
The only "pattern" that I see is that my desktop is on line, because I can be not at home for 12+ HS and I can connect remotely to the server (rd p and trans droid) so I know it has internet access, but sometimes I think this happens when I turn on my desktop, like just now, this morning, but again, I feel is not every morning, trying to be more scientific about it I come here after every time it happens to record it, and also set the record straight about the issue description.
So, assuming it is not a hardware issue, because I did not had this problem in all 2011 and 2012, I do not overclock the router neither use other than default TX power level.
- How do I begin diagnosing this issue?
- If it is a known issue with this builds? I could no find it.
My goal is to be able to provide info for debugging the problem and possible finding a fix/workaround it. If it is indeed hardware failing, how do I even begin to diagnose it from that POV? The message is empty...
Even with the new build r21061 still happened two more times. Now the real problem to me, is that I cant even revert it to stock firmware, I tried even with:
- unplug router
- press and hold reset
- plug router
- keep pressing until power led blinks orange
- enter 192.168.0.1 (PC must have static IPA, i use 192.168.0.200)
Can't open 192.168.0.1 in FF nor chrome and does not even ping. [URL]. I just want to get it back to stock or do not hang up the switch-to-router(ing).
View 1 Replies
View Related
Jan 4, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : CityCell Zoom (in Bangladesh)
I bought a MR3040 Router & I have a ZTE AC682 (EVDO) Modem. I found my modem's model in Modem Compatibility List (Other Country, Indonesia & Singapore).
1st time The router showing Unknown Modem.
Then I tried with .bin file upgrade. The Router Showing Identifying .... Then I tried with firmware Upgrade. But Still Showing Identifying ....
My Systems Log as below
code...
View 5 Replies
View Related
May 16, 2013
I updated my dir-655 firmware to 1.36WW after the update I the router has been restored to factory settings and every time I try to change any setting it gives me: "ap should not be locked before configuring". I cant change set any configuration, cant change even the router time!I logged in to the router as admin and left the password blank.
View 2 Replies
View Related
Aug 6, 2010
As I continue to have various issues with my revision A version of the DIR-825, does an updated firmware is in the works? Or has revision A been DE-supported by Dlink?
I'm still having issues with: Share port printer no longer being recognized/usable until router rebootedLoss/overload of router which causes all clients (wired and wireless) to loss connectivity Router rebooting itself periodically
View 4 Replies
View Related
Mar 23, 2011
I have a laptop connected to internet via a router using WiFi.My desktop computer doesn't have a WiFi connection. I want to connect my laptop and my desktop computer using an ethernet cable in order to access the internet on my desktop computer. I've been fiddling around for over two hours with no luck so far. Both computers are on Windows 7.
View 3 Replies
View Related
Nov 20, 2011
How can I configure my TP-Link router TD-W8950ND act as an access point? I'll be connecting it to a main router which is connected to the ISP.
View 1 Replies
View Related
Jan 25, 2012
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
View 1 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Dec 28, 2012
how can I configure a belkin f57230-4 (802G) WIRED to my FIOS 802N router/modem?
View 1 Replies
View Related
Mar 13, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : BSNL
I'm unable to configure my Data Card (ZTE-AC8700). I tried with manual settings but it keeps on showing the message "connecting" but doesn't connects although my datacard is shown as identified by the device MR-3020. I'm using BSNL EVDO connection and my datacard is ZTE-AC8700. It doesn't uses any APN, only a username and password and dial number "#777" is required to connect. configuring my datacard with MR3020 ???
View 2 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Mar 20, 2012
I have a dir-825 and wireless clients connected on the 5ghz ssid can see clients on 2.4 ssid and also out to the WAN (internet) but can't see any clients (my NAS ) connected to the dir-825 wired lan.2.4 ghz clients see everything fine. same with clients connected through the wired lan. I've tried DHCP and static ips. no idea what to do next.I was originally on 2.02 fw and have tried 2.03, 2.05 and now 2.06I'd really like to keep the 5ghz on because I have an AP by my tv and several devices connect from there to stream from the NAS.
View 2 Replies
View Related
Sep 19, 2011
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies
View Related
Oct 11, 2012
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies
View Related
Sep 14, 2011
I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off). All computers and other devices connected to it are manually IP configured. I desire to add a device that cannot be manually configured, and needs DHCP. I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network). The new device needs two-way internet access, but doesn't care if it sees any other current network devices. I've tried several configurations, none seem to work.
View 3 Replies
View Related
Apr 11, 2012
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
View 3 Replies
View Related
