No Wired Connection On Belkin Router
Apr 20, 2012
I can get my new PC to connect to my router wirelessly, but not with a wire. I don't get a blinking green light on the ethernet port, but only a continuous orange light. With wi-fi, the PC gets through, obtains an IP address, it's not being blocked on the MAC address.Now, I have the following reasons to think the problem is in the router:
- It's not only my new PC I can't connect with a wire--any other device, Mac or PC, doesn't work, but works with wi-fi;
- my old PC connects fine with a wire. I'm using the same wire, on the same Router port when trying with the new one.
View 2 Replies
ADVERTISEMENT
Feb 24, 2011
I'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
View 5 Replies
View Related
Nov 3, 2011
I've recently replaced my router with this Belkin (F5D7230uk4) Router, (this one without the wireless reciever Whenever it's used for online gaming, either on my computer, my playstation 3, or my brothers computer the router will lose connection after about 5minutes, then return within about 30 seconds. This happens every single time without exception, and have not been able to play for longer than 10minutes on any occasion since changing the router. I've tried connecting straight to the modem and it all functions correctly with no problems, so I am certain that it is something that needs to be setup with the router. I've searched many forums and posts from people having similar problems, and followed instructions to disable router firewall, disabled UPnP and NAT etc with absolutely no success whatsoever.
View 1 Replies
View Related
Apr 28, 2013
I have xfinity internet with a comcast rented modem connected to a personally owned belkin router. I can successfully connect to the internet directly from the modem or if I connect to the modem to the router and then to my computer via ethernet cable. I cannot for the life of me connect wirelessly with any devices. The router previously worked when it was hooked up to comcast internet, but it was moden->router->my router. When I connect wirelessly on my Windows 7 laptop, it says I connect and that there is internet access. But when I try to load a page it takes me direclty to this website: url.. Comcast says that it is my router that needs configuring properly with xfinity and wants to charge me $39 to provide this wonderful service.
Router: Belkin Model F6D4230-4 v1 with firmware F6D4230-4_WW_1.00.03
Modem: Comcast Model RCA DCM425
View 2 Replies
View Related
Mar 30, 2013
Belkin N750 Router - wired connection can not access Internet. I've tried direct to modem and have no problem, have tried old router, no problem, but if I shut down desktop completely (Win7) and restart, I get no connection. Uninstalling the NIC (Intel 82579V Giga) and restarting, then I get connection again. However, if I start in safe mode with networking, I have no problems at all. I've disabled my firewall to no avail.
View 3 Replies
View Related
Apr 11, 2012
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
View 3 Replies
View Related
Dec 25, 2011
I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.
View 9 Replies
View Related
Jun 4, 2012
I have talktalk router,I need to change it with Belkin router,how I cant set up a connection? My self I have try but the connection is but router is not connect.
View 2 Replies
View Related
Feb 27, 2012
I've been having big problems with my Belkin router. The connection is often slow even after restarts etc. I'm not sure whether it's the line quality/broadband usage/router quality that's causing the problem. How can I pinpoint the issue?ISP: Virgin MediaBroadband: ADSLAnti-Virus: AVGI've attached the image and ipconfig text file.
View 1 Replies
View Related
Jul 19, 2011
I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
View 13 Replies
View Related
Oct 8, 2011
I have a US Robotics 5462 router and a D-Link DCM-202 cable modem on Comcast. I've had this router for years and initially configured it for wireless access using a Windows XP system (this router requires you to configure it via Ethernet and 192.168.2.1). That computer stopped working last year, so I got a new computer running Windows 7.When I first got this new PC, I could not connect to my router via Ethernet (just like I can't now), but I was still able to connect to the wireless network I had previously set up, so I was satisfied.
A year went by, and last week I was suddenly unable to access my wireless network, so I did a factory reset on the router, erasing my previously configured wireless network and requiring me to connect the router to my computer via Ethernet to reconfigure the router. I tried to do this, but despite all of the correct LEDs being lit on the router, I could not access 192.168.2.1. A little poking around on my control panel revealed that my LAN was being labeled as an "Unidentified Network" and there was "No Internet Access." I tried to make it a private network, but that didn't fix the issue.
I searched around for a while and read some advice to try running ipconfig. When I did that, I saw "Media Disconnected" for my LAN adapter. I've tried a few of the possible solutions already with no luck. With the same computer and the same Ethernet cable directly connected to my modem instead of through the router, I *CAN* get online. That's how I'm connected right now. Also, I have no problem accessing any wi-fi networks.
View 5 Replies
View Related
Oct 5, 2012
My computer is directly wired to a wireless modem and an unsecured wirelss connection is available. Is the directly wired computer secure?
View 1 Replies
View Related
Feb 21, 2012
I posted a time ago here because i cant open my ports because i have a internet connection that first goes to my router and then to my modem [URL]
View 1 Replies
View Related
Dec 25, 2011
I recently changed my internet connection from a very slow adsl connection (im a LONG way from the exchange) to a moderatly faster vdsl connection. With the upgrade, they force me to use a modem that looks like it was made 20 years ago (although they say its had all the internals upgraded a month ago) leaving me to use a seperate router for wireless signal. I bought a bellkin F9K1002 v3 and after a little hassle had it up and running, the network connection between all the systems is great, but the router drops the internet connection every 30-120 seconds, for 15-20 seconds each time. I have about 10 devices connecting, but problem is there with just 1 connection wired or wireless.
I've tried calling my ISP (who will not touch router settings) and belkin tech support (who sound like they touched their first computer about 22 seconds ago) with no improvement. I've connected directly to the modem and had perfect connection for 12 hours, ruling it out of the equasion. I've disconnected all systems but one at a time, trying on 3 systems, with no improvement. I've turned off firewall, WPS, tried multiple wireless settings (channels and such) updated firmware all with no improvement. Here's a sample of the system log on the router:
Jan/1/2000 00:27:59 WAN PPPoE client receive
PADS
Jan/1/2000 00:28:00 WAN PPPoE client PAP
[Code].....
View 15 Replies
View Related
Oct 15, 2012
I have a Compaq with XP wired on a Network with a Belkin N600 Router.There are 5 computers on the Network, (4 wired, one wireless) and this is the only computer that I have problems with connectivity. It connects to the Belkin through 2 switches.Typically when I turn the system on it connects, downloads mail, etc. After a short period of time there is no connectivity to the network for printing nor the internet.I may get connectivity randomly again after a while, but you never know if or when you will get connectivity again for sure. I am using Explorer.I had loaded some Belkin software with no luck so I uninstalled it. The other computers have no special software for the router.
View 1 Replies
View Related
Dec 30, 2011
I have a belkin wireless router/modem running our home network. We connect using 3 android devices, a wii and wireless printer with no problems. However, when connecting using either a windows 7 or windows XP laptop the internet connection is lost after a couple of minutes. I can't work out the cause of the problem but resetting the router gives a couple of minutes of browsing before it goes again. I have tried using static IP addresses for the laptops but this hasn't worked, furthermore I have tried a winsch reset.
View 2 Replies
View Related
Jun 3, 2011
every now and then my Belkin brand router will just switch from green light, to red light. Sometimes unplugging it for a while fixes it, sometimes unplugging it for a LONG while fixes it, sometimes prayer and chanting fixes it. But most of the time the red light sits there mocking my efforts.What's making this happen? Is it my wireless security settings? Because I used to try and fix it by pressing/holding down the WPS button.
View 4 Replies
View Related
Feb 12, 2011
My LG BD570 is losing connection about 30mins in while I'm streaming an .avi from my desktop.This problem has only been happening since I setup my new wireless router. Belkin N300.I have no other network problems between my computers or simply using the internet.I did not have this problem previously when I was using an older Belkin Wireless G+ Router.
View 4 Replies
View Related
Dec 10, 2012
Can any of the wired/wireless routers like the n-150 be sub-netted with each wired port being its own subnet?
View 1 Replies
View Related
Sep 22, 2011
After a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
View 3 Replies
View Related
May 26, 2011
I have 3 computers running Windows-7. One computer is directly attached with wired connection to broadband internet modem and other 2 computers are attached through a Wireless router attached to modem. The problem is this that both wireless computers are running internet well while the directly connected computer shows internet connection but no data flow happens. When the Wireless router is turned off the directly connected computer starts working internet.
View 2 Replies
View Related
May 15, 2007
We have a main and branch office, each with an RVL200 . I configured both with static IP's as provided by my ISP, yet when I try to do a test connection on the IPSec screen I just get that it's "waiting for a connection" in the cell third from the left. Both RVL200 's are connected directly to the modem/bridge supplied by both ISP's.
View 5 Replies
View Related
Feb 13, 2013
I have a strong internet signal with good SNR coming out of my cable modem, then a nice short 3ft cable going to my linksys VOIP router (I think it's a SPA 2102). Whether I have anything downstream plugged in or not, the "phone" light on the VOIP router goes off every once in a while and when I check I find that I've lost both dial tone and Internet - basically everything downstream of the VOIP router. Have tried every variation on configuration you can imagine (feeding just one phone, feeding the entire phone wiring to the house, nothing at all plugged into the phone jack, no computers downstream plugged in, replaced all the cables, ...). I've replaced BOTH the cable modem and the linksys VOIP router and the problem continues. My cable company says my signal is fine. They suggested a signal amplifier but the coax comes straight to the modem, no splitter, and I'm always seeing 6-7dBmV. My phone company says their router must be losing signal upstream and refusing to reconnect, especially now that we've tried replacing their VOIP router with no change. Any chance I got two 'bad' routers in a row? Not sure what they did for setup parameters. I'm not particularly tech-savvy but have read a lot since seeing these issues, have run my own ping and tracert checks and everything seems to be wonderful... but then most of the time everything IS fine. When I have phone it's crystal clear and when I have internet it's nice and fast. I sometimes go 24hrs or so without a drop, but other times I'm resetting 2-3x in a couple of hours. All I do is power off the VOIP router and back on and everything is fine, for a while. After first getting VOIP things were fine for 4-6 weeks.
View 1 Replies
View Related
Feb 4, 2013
For a number of months now, our Internet connection in an office of 5 computers, 2 Macs, 3 windows boxes (1 as dell laptop) has experienced the connection of the Internet dropping off.The timing of the 'drops' is usually in the morning, when the Dell Inspiron M510 either boots up or wakes from sleep. Typically the solution is to turn off the modem, the router and switch, wait a few minutes, then turn the switch, the router, then the modem back on. Our connection via the modem is through AT&T, via a non-static IP addy.Our router is a BEFSR41, v4, with firmware up to date (circa 2006) It's becoming a daily chore now, just about, and is getting to be a bit of a headache on some days.
View 3 Replies
View Related
Nov 30, 2011
I'm capped out at 12 mbps service through Mediacom. My PC is directly wired to the WRT120N. I consistently test in the 11 mbps range.
I have a very unusual issue though.
I can connect my iphone and Xbox wirelessly through my router with no issues on their side. However, any time I do so, it kills my wired connection on my PC. I'm not doing huge downloads or P2P or anything like that. In fact, the speed drops immediately on my PC the moment I connect my phone to the wireless network regardless of what i'm doing on the phone (checking email or loading a webpage).
View 2 Replies
View Related
Feb 6, 2012
I'm trying to install a new modem/router (the above) and am having a few problems. The install seems to have gone fine and the firmware has been updated to the latest version. PCs/laptops/PS3s/phones can all connect to the router both wired and wireless. But the modem seems to be dropping its connection to the internet at regular intervals - sometimes every 15mins, other times less. The security log mentions "PPPoE disconnected" after which it reconnects.Has anyone got an idiot proof list of what I should be checking? My old Net gear DG834PN does not have this problem at all so it really has to be the router rather than the line - at least that is my guess.
View 2 Replies
View Related
Jan 18, 2012
Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies
View Related
Aug 18, 2012
I'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies
View Related
May 8, 2012
I have one desktop PC at home, Windows XP, and have a Time Warner wired modem for internet. I work from home and connect to my office computer through Remote Desktop Connection.I purchased a Roku2 video streaming player and bought a Belkin N150 wireless router in order to get the signal from my desktop computer out to the living area where the Roku is located. The connection with the Roku is perfect. However, my remote desktop connection now disconnects constantly and internet browsing on the local computer is very slow and choppy.The configuration I used is 1) Belkin ethernet wire from Belkin to back of modem 2) modem ethernet wire from Belkin to computer.If I remove the Belkin and put everything back the way it was, all is fine ... but, of course, we then have no Roku.
View 2 Replies
View Related
Dec 16, 2012
I got an EDIMAX Nano BRN-6258n Router to replace my glitchy Belkin Wireless-G router about a month ago. My typical network setup involves a desktop computer wired to a router and a laptop connected wirelessly.
Anywhere from once a week to twice a day, the internet connection starts (selectively) dropping off. While I cannot browse the web, some of my browser add-ons and Skype/Dropbox are working fine, and Windows almost always indicates a perfectly working connection.
If I am streaming through YouTube or other sites, the stream continues to play after the connection loss.
For AV, I use a combo of Malwarebytes and AVG Internet Security.
View 2 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Oct 27, 2011
I just configured a RV016 and it's ignoring my VPN connections and its routes. When I run a tracert to my other site it returns all the hops between they.
View 1 Replies
View Related
Feb 15, 2013
I have an E1200 acting soley as an AP. Everything works just fine, but when I try to copy files from one wired computer(both Windows 7) to another one on the same router(the E1200 in this case), the network utilization is only about 4%. If I take one of the computers off its wired connection and make it wireless, the utilization goes up to about 50%. Also if I take one of the compuyters off this router, and make a wired connection to my main router(which is connected via a wired connection to the E1200), the network utilization goes up to 50%.
View 3 Replies
View Related
