Can't Connect To Network But Shown On List?
Jul 5, 2011
I've been "borrowing" a neighbor's wifi for the past 2 months. Everything was fine..a few hang ups here or there but other than that, no problem. The other night, my connection disconnected and i haven't been able to reconnect to the network for the past 24 hours.. The network is on the list of available networks. It's open, always has been. When i click it to connect, nothing happens. I've tried repairing the connection, turning off and on my radio signal
View 3 Replies
ADVERTISEMENT
Jun 24, 2012
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
View 9 Replies
View Related
Jan 31, 2012
I have a recently-purchased Inspiron 6000 running Windows 7. I have set up a home wireless network on a wireless router (D-Link) but it does not show up under wireless network connections (others in the neighbourhood do). It does appear however under "Manage My Connections", where it is listed correctly to automatically connect. The SSID is not hidden. Network adapters in the Dell are all reported as working normally, and the drivers are also reportedly up to date. Wireless networking is switched on.
View 1 Replies
View Related
Mar 1, 2011
If I look at a site like wikipedia for example ,it has lots of text. If I capture those packets which made up that page using wireshark I cant find that text anywhere no matter what filter I use and even though I turn on ASCII. Is it because text is being rendered unreadable by some kind of compression?
View 7 Replies
View Related
Sep 26, 2011
I got a Cisco C880 router( IOS version: 15.1(2)T1 ) with PCEX-3G-HSPA-G card installed When I insert my 3G card and issue show cellular 0 network, I found that the network is not my 3G card ISP, may i ask how can I manual select the ISP?
View 1 Replies
View Related
Jul 11, 2012
i can't find my wireless network in the list. It shows me networks from my are but not my one. I know my one works and has no problem as my sister can use her laptop wirelessly
View 19 Replies
View Related
Jan 17, 2011
I recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?
View 1 Replies
View Related
Jan 24, 2012
II tried to make a wep password. and when i made one, i went on my laptop to try to find my network but my network name was completely gone from the list of available wifi networks i can connect to.
View 2 Replies
View Related
Jan 31, 2011
When I click on to my wireless network list nothing shows up, but I use my work pc and about 20 networks show up. What is going on with my lap top.
View 1 Replies
View Related
Mar 1, 2012
I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
View 2 Replies
View Related
Dec 13, 2011
I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
View 1 Replies
View Related
Apr 21, 2011
My boss would like to know if there is a way to find out the ip address of a person VPN ing into our network. Let's say Joe Smith is VPNed in from home and his carrier is cox communications. How would I go about finding out what his ip address (the ip issued to him by cox) is? Is that even possible? If it is possible, is there a way to create a list of ip addresses of everyone that has ever VPN ed into our network? We are using a Cisco ASA 5520 and Cisco VPN Client.
View 7 Replies
View Related
Jun 9, 2011
I've used Wireshark sniffer and one of the outputs was there was a loop, wireshark produced a mac address lets say its asdfgh so I looked it up on my core switch but there is no asdfgh on it's mac address table.
View 6 Replies
View Related
Apr 12, 2011
We tried some time ago getting David's XP notebook and his Win7 desktop to share the Internet connection that his desktop has via an ADSL modem and telephone line.We wanted to get the two PCs to communicate with each other via the Wi-Fi adaptor card in the desktop and the built-in Wi-Fi adaptor in the notebook and then to share the Internet connection. We had no success.Last weekend we tried to get David's Win7 laptop and Win7 desktop to share the Internet connection that his desktop has. No success again.At the moment each computer lists the other one in its "My Computer" page.he TrendNet Wi-Fi software in the desktop indicates that it has 100% signal strength from the laptop.Both computers are set to "Home" type networks.We can start a Home Group on either computer but cannot get the other one to join - an error is reported. We use the correct password when trying to join - the password displayed by the other computer when its Home Group is created.We cannot get the ICS service to stay started. After attempting to start it an error is reported that says "ICS service started and then stopped".
View 2 Replies
View Related
Feb 17, 2011
I have a DIR-635 and is rev B3 but this is not shown on the dlink website..
View 1 Replies
View Related
Oct 23, 2011
LMS 3.2,the devices are not shown in the CS.
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.
View 7 Replies
View Related
Mar 3, 2013
i don't know how I have done this but I have managed to connect my partners laptop to my network list on my new Toshiba laptop (don't know if make or modal matters) this seemed to have appeared whilst uploading and fetching photo's with skydrive,how do I get him off my network list???
View 1 Replies
View Related
Nov 17, 2011
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
View 1 Replies
View Related
May 1, 2011
1. To specify static IPs for components on my network, is it simply a matter of reserving each component in the DHCP Reservations List portion of the Network Settings page?
2. On the same page, in the DHCP Server Settings portion, if Enable DHCP Server : is deselected, does this mean that only the hosts specified in the DHCP Reservations List can access the network? In other words, is access now restricted to these entries?
3. If the DIR-615 is powered OFF, will the above settings, etc. be lost (similar to a reset)?
View 6 Replies
View Related
Feb 1, 2012
I've setup my VPN on the cisco ASA 5505 which works perfectly, users from outside can access my internal LAN. Now what i want, Is to create another VPN Tunnel group with another set of IP in which i want to allow them access to one server inside our LAN. See below details of network. [code]
View 1 Replies
View Related
Jan 13, 2011
yesterday I did format my laptop (lenovo E43) but after that my LAN is not showing on my LT what I do I am using windows xp
View 1 Replies
View Related
Aug 21, 2011
I am able to connect to my wifi but it shows LIMITED ACCESS and it show no internet access.I also tried to manually enter the same IP ADDRESS of another laptop by which i was able access Internet through the same wifi.
View 12 Replies
View Related
Feb 5, 2011
I'm having big problems with my Linksys WAG320N. I'm pretty clueless when it comes to networking.Without changing any of the settings, the other day my Macbook Pro couldn't connect and it kept saying 'Connection timeout'. From that point my iPhone also refused to connect, although accessing the internet on my MBP via Ethernet was fine.
I did a hard reset following instructions from this forum then re-configured with the installation CD. The wireless LED on the router was lit but my MBP couldn't see the network. Eventually I managed to connect after rebooting my laptop, and enjoyed all of 10 minutes of problem-free of wireless internet connectivity before the network just dropped out and now doesn't show up in my list of networks again, although the wireless LED is still on. Connecting via Ethernet still works, just not via wireless.I've rebooted my laptop and the router and tried switching channels on the router, all to no avail.
View 9 Replies
View Related
Apr 2, 2012
I've recently spotted my router's configuration page is shown publicly if they connect to external ip or a domain name I've set up to my own IP through a web browser (it's a game server)I see it as a security thread, that everybody can connect to my router's configuration page and want that down asap!
View 3 Replies
View Related
Mar 16, 2012
Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.
View 4 Replies
View Related
Jul 1, 2011
By reruning discovery with new seeds etc I have more devices discovered. Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
View 10 Replies
View Related
Dec 8, 2012
I just acquired a used E2100 from an auction, when I plug it in I see an "Unnamed Network" with full bars in wireless, but can't connect since I don't know the ssid/password.When connecting with cable, with ipconfig I get a 10.10.10.108 ip, the gateway is at 10.10.10.99. Yet I also cannot access it.I have tried the reset button at the bottom, holding it for over a minute, pressing it quickly, holding it for 30 seconds, holding it and unplugging + replugging the router, but nothing is working.I have also tried the CD that comes with it with cable and with wifi only, but it does not find the router. I have deleted my default wireless network settings, had my wifi on, was not connected to any networks, yet the CD could not find the router.When router is on, the WIFI led blinks around once a second, while the LAN led blinks randomly like it should.
View 3 Replies
View Related
Jul 3, 2012
I've got an E4200v1 running 1.0.04 firmware with guest access enabled. I'd like to find out who is logged in using the guest access. Is there a way to get a list of the DHCP clients on the guest network? I'm able to do this for the non-guest access via the WEB interface's Status->Local Network->DHCP Clients Table page. But I can't find a similar table for the guest network.
View 3 Replies
View Related
Jan 8, 2012
My wlan card has been dodgy recently disconnecting and reconnecing but now does not work at all. It is no longer shown in device manager I installed the drivers for it from the disc that came with it and ones from the internet but no luck from what I've read online it says my laptop (advent 9617 - ancient i know) came with the Ralink RT73 USB Wireless.
It also keeps popping up "this device can perform faster is you connect to a high speed port" I took off the casing to have a look at it and I can't see any dodgy wires or connections unless its somewhere I can't see or get to. I just took it out and put it back in but no luck.
I can still get on through wired LAN but live in shared accomodation and it's a bit inconvenient when I'm trying to work. Oh and there's no router problems as my phone and housemates laptops connect fine.
View 6 Replies
View Related
Jun 12, 2012
I've been having some problems with my Ethernet connection lately.I unplugged my laptop from the Ethernet connection I had at my old place.At two different locales, I have tried to use an Ethernet connection in order to get better speed (the wireless at the first locale was non-existent and at the second it is extremely slow in my room). I have done so with two separate cables that I have tested on others' computers and found that they are perfectly fine. That, of course, leads me to believe that it is my computer and is either a hardware or software problem (here's hoping it's the latter).Anyway, my laptop is a Dell Inspiron 1720 (purchased in 2006). About a year ago, I updated to Windows 7 from the pre-installed Vista. Never had any problems (as I said, everything was fine up until about a week ago). The installed card is a Broadcom 440x 10/100 Integrated Controller. Everything under Device Manager indicates that the hardware is working properly and has all of its drivers installed, but nothing is working.I have tried to uninstall and re-install the drivers (albeit by allowing windows to find them automatically), but the result is the exact same.I have checked the port and found that there is no debris or obstructions. My computer hasn't been dropped or mishandled in any way.I'm currently being housed on the campus of Delta State University, which is why this appears, but here is the report: [code]
View 5 Replies
View Related
Nov 16, 2011
I replaced old cisco router 2811 with new one 2921 , all works except crypto map VPNs routers can ping each other , ACLs are not applied to outbound interfaces show crypto isakmp sa is empty after i make same configuration on a new router 2921 config.
View 1 Replies
View Related
May 19, 2011
How can I configure the wireless not to be shown for users,but used by them? On a Cisco 1242AG I mean when someone do a wireless discovery not see my wireless name, but typing the name be able to connect it.
View 5 Replies
View Related
Mar 9, 2012
I think, the device's DHCP server can not be configured as expected.
My plan was to set the following preferences:
DHCP IP Address Range: 192.168.100.1 to 254
Default Subnet Mask: 255.255.0.0
Default Gateway: 192.168.0.1
Default Wins: 192.168.0.1
Default DNS: 192.168.0.1
But all I get is the error message, if I try to save these settings: The start host id of lease pool should be small than the end host id.
View 5 Replies
View Related
