D-Link DIR-655 :: DIR-635 Not Shown On Website
Feb 17, 2011I have a DIR-635 and is rev B3 but this is not shown on the dlink website..
View 1 Replies
ADVERTISEMENT
D-Link DAP-1522 :: DNS Server Not Shown In Static IP
Mar 16, 2012Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore.
View 4 Replies View RelatedD-Link DAP-1522 :: DHCP Server Setting As Shown
Mar 9, 2012I think, the device's DHCP server can not be configured as expected.
My plan was to set the following preferences:
DHCP IP Address Range: 192.168.100.1 to 254
Default Subnet Mask: 255.255.0.0
Default Gateway: 192.168.0.1
Default Wins: 192.168.0.1
Default DNS: 192.168.0.1
But all I get is the error message, if I try to save these settings: The start host id of lease pool should be small than the end host id.
TP-Link Dual-Band Wireless :: TL-WDR3600 - Media Server MP4 Files Not Shown
Feb 17, 2013Region : Spain
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I've recently bought the TP-LINK WDR3600 and am very happy with it. I'm using its media server feature so I can watch movies on my TV through DLNA, but have found a problem: the MP4 files are not shown. All the other files work perfectly (AVI, MKV), but the MP4 files are not shown in Windows Media Player or LG Smart TV. I assume the Media Server software simply does not include this kind of files when scanning. Is there any way of accessing the media server configuration file and "enable" MP4 files?
D-Link DCS-942L :: Searching Support Website Getting No Link
Jan 30, 2012I have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies View RelatedD-Link DIR-655 :: Log Access To Website
Jul 7, 2010Is there any way to log if a URL/website has been accessed? It seems that the "Access Control" section would do this, but I don't know how this works nor how to view the logs.
View 2 Replies View RelatedD-Link DIR-601 :: Route Website Name To Local IP?
Oct 7, 2011I'm trying to have a website name: remote.test.com route to a local IP address but can't seem to get it working with this router. I don't want to use the windows hosts file as there are different Operating Systems that will connect and so routing though this D-Link is the only option. I have my wireless router connected to a separate network switch though it's WAN port where other computers sit as well as the target machine. I can use the internet as normal like this so things are working fine.
[code]...
D-Link DIR-825 :: RevA1 Won't Connect To One Website
May 17, 2011For sure odd reason my DIR-825 won't connect to my website and just this one website. Every other site I go to works. And this problem is happening by WIRED and WIRELESS connections. On top of this the site is being blocked on my desktop, laptop, and my iPod Touch (WiFi). That's three devices!! Neither the router or my anti-virus (Avast Pro) are blocking the URL. Also, I know the site is not down since I can connect to it by using my neighbors open wireless network. Plus, I can pull up the website at work using the same laptop. So, I've reset the router, rebooted it, and even downgraded to 1.12NA firmware and now back to 1.13NA. I pinged the site in command prompt and all four requests timed out.
View 2 Replies View RelatedD-Link DIR-615 :: Cannot Stream Audio From One Website
Mar 24, 2012I am able to stream audio from a website when i connect directly to my cable modem but when the router is connected it doesnt work. I have tried resetting the router, ping the website and get "request timed out"The firmware is up to date version 2.25 I have tried other computers that access the same network and they also cant stream the audio.I have also turned off my windows 7 firewall with no luck I can access other sites I visit and stream audio just fine so I wonder if the router may be blocking something on this website?Is there a way to allow an audio stream to come through that may be blocked by the router?
View 1 Replies View RelatedD-Link DIR-825 :: Blocking Access To Website?
Apr 20, 2013For the last week, I haven't been able to access my banking web site (Royal Bank in Canada). It doesn't matter which browser (FireFox, IE, Chrome) or computer (desktop, laptop) or even my cell (on WiFi).It must be the router (DIR-825, HW-B1, FW-2.07NA) since I can connect to the web site fine if I connect straight to the modem. (Also, if I turn off WiFi on my cell, I can connect to their web site but once I turn WiFi back on, it wont connect).I tried restoring to factory settings but that didn't work.I tried some of the suggestions here: http:[url].....
- Turn off ALL QoS or Disable Traffic Shaping. Advanced/QoS.
- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
- Ensure devices are set to auto obtain an IP address.
- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
- Enable uPnP and Multi-cast Streaming under Advanced/Networking.
D-Link DIR-655 :: Cannot View Website Within Network
Apr 28, 2011I have a DIR655 and I used to get to see my website from within my network. After a recent crash, I can now only see my website from outside my network.
View 11 Replies View RelatedD-Link DIR 655 :: Blocking Website Of Admin
Apr 5, 2011I have a dir-655 a3 router that is blocking my website ip address.I could previously access this site until one day, without changing any router settings, it started blocking communication to my website. pings, tracerts, web browsers, everything simply times out. It resolves the IP address ok but doesn't go any further than that. I was on firmware 1.31 and have now upgraded to 1.35NA, but no luck. I have also tried resetting factory defaults to no avail. If i bypass the router and plug my computer straight into the modem, the site loads fine. so its definitely the router. I have tried this on a number of devices to make sure. It appears that for some reason the router is blocking that specific IP address as it is on a shared hosting and I can't access any other sites on the same IP address. Does the router check the IP address with any web service before returning the request?
View 4 Replies View RelatedD-Link DIR-655 :: Website Filtering Not Working?
Jan 17, 2011It seems (and should be) pretty straight forward; under ADVANCED go to WEBSITE FILTERING and enter in the URI, or partial URI, that you want blocked and make sure the drop-down menu is "DENY computer access to ONLY these websites". The only problem is, I can still get to all of them. I saw in another forum that you had to check "Enable Access Control" and go through a 6-step process where you specify machines - I truly hope that isn't the solution, because it's needlessly complicated for most users who only want to block ALL devices on their network from accessing certain sites. My Hardware Version is B1 and my Firmware version is 2.00NA.
View 2 Replies View RelatedD-Link DIR-615 :: Blocking Not One Specific Website But All Websites?
May 16, 2013In Setup > Parental Control it is possible to set rules attached to specific website URLs. I want to block access from 1am to 6am.
However these rules only apply to websites URL. Is there a way to apply a rule to ALL websites at once? I tried to enter "*" or "*.*" in website URL field but it doesn't work.
D-Link DIR-655 :: Can't Get To Website When Router Connected To Computer
Apr 1, 2011Can't get to my Web site with router is connected to my computer and when I connect to my computer with out the router in-line I can connect. I tried the reset in the back but it didn't work.
View 11 Replies View RelatedD-Link DIR-655 :: Unable To Connect To Particular Website Through Router?
Jan 4, 2011I am timing out when attempting to connect to a particular website for all the computers on my network using my DIR-655. I checked my router's setting but I have no website filtering in place. Is there any other router setting which would cause one particular http address to always time out ? When I try to ping the web address it times out also, so it makes me think it is not the DNS server. Of course it could be my ISP, but why would a single web address time out always whereas my normal web surfing ?
View 14 Replies View RelatedD-Link DCS-930L :: Adding Images To A Website?
May 16, 2011Excuse my ignorance but, is there an easy way to add the camera image's to a website Is this a process that utilizes FTP - or
I do have some experience creating websites using MS Front Page.
TP-Link 3G/3.75G Router :: TL-MR3040 Website Not Loading When Using AES
Mar 27, 2013Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
Routers / Switches :: D-link Router Is Blocking Website?
Feb 27, 2011l have a web-site and when l go on it it comes up with blank page internet explorer cant load this page.l have phone talk talk and they cant fix it.l have a d-link router,its only my own web-site l cant access all other web-sites l can access.
View 2 Replies View RelatedD-Link DCS-942L :: Black Box When Viewing From Remote Website
Jul 22, 2012I ran the setup CD and can access my camera from inside my local network. When I try to access it from outside, I can access the camera fine but the video stream is black. I tried RTSP ports 554, 2080 and 5632 with no success (of course I port forwarded the dsl modem as well). My dsl modem is a westell 7500 and my ISP is frontier communications. I contacted their support tech and at first he ran me through the exact port forwarding sequence I had already done on the modem. He then went away for a while and came back to say that I need to upgrade to their fixed internet address service. I understand dynamic DNS and don't think this is an issue because I can contact the camera OK, I just don't get the video through (black screen). Another issue is that the camera is reporting PPPOE 'failed'. The support tech has given me two PPPOE user names and passwords but neither work. The support tech said that they do require PPPOE.
View 3 Replies View RelatedD-Link DCS-930L :: Unable To Connect To Mydlink Website
Aug 1, 2011I'm getting an error during setup that says "You are unable to connect to the mydlink web site, and your camera could not be added to your mydlink account."
View 14 Replies View RelatedD-Link DCS-930L :: Video Feed On Website Using ActiveX
Dec 29, 2011Forum member RDK graciously took the time to develop a tutorial for Setting up a user defined web page to show DLink DCS-930L/932L camera images using the DLink ActiveX control.
View 2 Replies View RelatedD-Link DIR-655 :: Website Filter Doesn't Work Anymore
Jan 12, 2012I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.
So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,
D-Link DIR-601 :: Configure Router To Make Website Accessible From The Internet?
Jan 25, 2012I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
D-Link DIR-655 :: Website Filter / Access Control For Wireless Laptops
May 2, 2011I have several laptops at home that connect via wireless connection tot he DIR_655. Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example). I selected "DENY computersaccess to ONLY these sites". I then saved settings.I then went to "Access Control". I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access. The URL/domain name is correct.
View 5 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8961ND Latest Firmware On Website Is Older Than Already In Router
Apr 7, 2013Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
I have just bought this ADSL router. Of course, the first thing I did was upgrade the firmware, or so I thought.It seems that the firmware on the TP website is older than the one which was pre-installed onto the router.Website Firmware: 3.0.0 Build 120524 Rel.05221 ------------- i.e. 24.May.2012 Release 05221.Pre-loaded Firmware on router: 3.0.0 Build 120808 Rel.28888 -------------- i.e. 8.August.2012 Release 28888.I have foolishly uploaded the older firmware to the router from the website. I wanted to see what version number showed in the Router's Firmware page so I did a ROM backup, thinking I could always reload the "current" firmware. As it turns out, the ROM file is just the user settings backup.
It is sad that TP-Link doesn't provide change logs. Where to find later firmwares, or even what the change to the firmware was?And when we can expect a new firmware to be uploaded to the website?
D-Link DIR-601 :: Website Filter / Access Control Causes Dropped Connection For Non-blocked Sites
May 4, 2011I'm trying to set up a website filter on my DIR-601. I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging. Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites". When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.") However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received. Unable to load the webpage because the server sent no data." This happens with ALL non-blocked websites. I'm using hardware version A1, firmware version 1.01NA.
View 2 Replies View RelatedTP-Link Dual-Band Wireless :: Unable To Load Website Hosted Behind WDR4300 At Times?
Jan 15, 2013Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Bell Canada
We have a WDR4300 router that works well about 98% of the time. We have a static IP address from our ISP configured through PPPoE in the router and are hosting our own email and web server at local IP 192.168.1.200 behind the router. Port forwarding is enabled and working beautifully.
At some times throughout the day, any computer behind the router on our local network is unable to browse to our own website by our domain name (e.g. www.xyz.com) nor by the static IP it is attached to. We also get e-mail errors with mail client configured to use the domain name or the static IP it is attached to as the outgoing mail server. When this happens, I am still able to browse any other site on the internet without problem... just not our own. Also, I have verified that while this is happening (internal computers can access the internet but not our own website):
1) I can browse to our website just fine from a computer outside of our network (e.g. a proxy or a computer controlled remotely from my home)
2) a computer from within the office that cannot reach our website using the domain name or the static IP it is attached to can still reach the website by browsing to the local IP address of the web server (192.168.1.200)
3) the problem seems to resolve itself sometime within 45 minutes of noticing it is occurring if we do nothing. We can make the problem resolve itself sooner by restarting the router.
I have the impression that this problem MIGHT start occurring when users are downloading files from our website. Of course, if this is the case, we cannot simply restart the router to fix the problem because then we are cutting off their download.
Cisco :: Mac Address Not Shown?
Jun 9, 2011I've used Wireshark sniffer and one of the outputs was there was a loop, wireshark produced a mac address lets say its asdfgh so I looked it up on my core switch but there is no asdfgh on it's mac address table.
View 6 Replies View RelatedIP Configuration Address Not Shown?
Apr 12, 2011We tried some time ago getting David's XP notebook and his Win7 desktop to share the Internet connection that his desktop has via an ADSL modem and telephone line.We wanted to get the two PCs to communicate with each other via the Wi-Fi adaptor card in the desktop and the built-in Wi-Fi adaptor in the notebook and then to share the Internet connection. We had no success.Last weekend we tried to get David's Win7 laptop and Win7 desktop to share the Internet connection that his desktop has. No success again.At the moment each computer lists the other one in its "My Computer" page.he TrendNet Wi-Fi software in the desktop indicates that it has 100% signal strength from the laptop.Both computers are set to "Home" type networks.We can start a Home Group on either computer but cannot get the other one to join - an error is reported. We use the correct password when trying to join - the password displayed by the other computer when its Home Group is created.We cannot get the ICS service to stay started. After attempting to start it an error is reported that says "ICS service started and then stopped".
View 2 Replies View RelatedCisco :: Devices Not Shown In CS LMS 3.2
Oct 23, 2011LMS 3.2,the devices are not shown in the CS.
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.
Broadband :: LAN Connection Is Not Shown On Laptop?
Jan 13, 2011yesterday I did format my laptop (lenovo E43) but after that my LAN is not showing on my LT what I do I am using windows xp
View 1 Replies View RelatedLimited Access Shown On Wifi
Aug 21, 2011I am able to connect to my wifi but it shows LIMITED ACCESS and it show no internet access.I also tried to manually enter the same IP ADDRESS of another laptop by which i was able access Internet through the same wifi.
View 12 Replies View Related