I have wireless set up in the house. Every computer on the network can access the internet through the router except for one. This particular one also has a verizon broadand air card hooked to it and with that it can access the internet no problem. The problem is only with wireless.
what Ive done so far: 2 different wireless cards, uninstalled and reinstalled all drivers, checked all tcp/ip settings. Manually set DNS servers.
My internet operator told me that you can connect only one connection to broadband cable. If I setup wireless router & can I connect more than one computer to router? Is it possible ?
View 1 Replies View RelatedI have a Windows 7 machine that is wired to the router. I have Windows XP computer that is wireless in another room. Signal is showing 80% and internet is accessible and fast from both systems; but, I cannot access either computer from the other computer. I got the IP addresses of each machine and I cannot ping from either direction. Firewalls are turned off on both systems.When I type in \server, I get an error that say I should check my spelling or use the windows Search; but, that doesn't work.
View 5 Replies View RelatedSince a while back my internet access dies intermittently. I have a bunch of computers (mine, the kids, media stations etc.) in my network and one of them is configured to run two different instances of Windows: One for serious stuff (like work) and another for leisure. They're both Windows 7 Ultimate x64 instances and I use BootIt NG for this dual boot setup. Now, when I run the "work" instance I have no problems whatsoever but when I fire up the "game" instance internet dies off at irregular intervals, usually once or twice per hour.I've tried the usual stuff like resetting the IP stack (with ipconfig) and reinstalling the network card driver but the only thing that facilitatess is restarting the VDSL modem/router. I have also replaced the VDSL modem. What's really queer is that all other computers also looses internet access when this happens. And, if this wasn't strange enough, I never loose my WIFI, just the cabled network.
View 6 Replies View RelatedMy friends computer cannot access internet. Was wondering if I could hook it to my computer (using crossover cable) to access internet.
View 2 Replies View RelatedHow can I block my son's computer from internet access through our wireless router without having his computer in hand? I have accessed the router on line but don't know what to change there.
[code]...
I seem to suddenly be completely unable to access the internet on my desktop computer.
View 14 Replies View RelatedI see some other threads about this same thing but I wanted to start my own to keep track if what I did. I know zilch about computers.I have an ACER I got less than a month ago. I have Verizon mifi. Windows 7My comptuer says I am connected but it says no internet access. The wifi works fine on my old netbook though. I keep getting error 105 Unable to resolve the server's DNS address. What do I do?
View 1 Replies View RelatedI am connected to the LAN via ethernet cable, but internet access is terribly slow - cant even browse internet properly (work network uses a proxy to connect to internet - not sure if that is relevant). I would like to remain connected to the LAN via ethernet (to provide easy connection to intranet and mail exchange server, but for outside internet connections, I would like to use a mobile 3g connection.
View 1 Replies View RelatedWe are trying to get laptop to connect to our wireless. She has entered the network key and the icon says she is connected with a excellent connection, however, we cannot connect to the internet. The other challenge is that everything is in Spanish.
View 9 Replies View RelatedMy network connection was vanish the client are not connected to server and the computer cannot access internet
View 1 Replies View RelatedMy mother's computer periodically loses internet connectivity. This happens regardless of the browser (IE or Firefox). She must restart her computer to get access again. This happens regardless of her internet connection. She uses verizon at her home and accesses through my wireless router when visiting. This also happens if she is on a public access network such as a hospital
View 1 Replies View RelatedI migrated my internet from PPPOE to DHCP. My wifi is working with no problem but when I hook up my computer to 1 of the 4 Lan ports I can't seem to connect to the internet I can however log in my router no problem. But I don't get internet access... I wonder what could be the problem. I tried resetting my router and modem to see if just a bug or something but to no avail.
View 5 Replies View RelatedMy current network consists of 4 computers, 3 windows 7, 1 Windows Home Server 2003. All are wired to a gigabit unmanaged switch which is connected to a Netgear WNR200V2 router. The router is connected to the cable modem. I replaced the Netgear WNR2000v2 router with a Cisco RV110W firewall which i had preconfigured using another computer. The 3 Windows 7 PC's connected up with no problems. The WHS 2003 computer has no internet access. All 4 computers are visible on the lan and the 3 Win 7 PC can access the internet. I've tried accessing the internet by URL and IP from the WHS with no luck. All computers are assigned static IP's. I've checked all my settings, turned off the firewall in both the WHS and the RV110W with no change. If I plug the Netgear router inplace of the Cisco, all computers including the WHS have internet access. Has to be a setting somewhere in the Cisco router that's blocking the access. IP's for the 3 Win7's are 192.168.1.40, 41,42. Fot the WHS 192.168.1.76.
View 2 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View RelatedMy computer connects to an unscured wifi near my home and i have internet acces for a few minuets, then it just stoppes. Sometimes if i reconnect it will run for a few more minuets 5-10. I have tried two different computers with same results. about a month ago the connection worked fine. This just started recently.I can connent and access internet at other public places with no problem. It seems only this network i have trouble with, why?I am running XP on one, and Win 7 on other, same results.I have read alot of things and tried them all,
-resetting internet options
- changing tcp/ip
- system restore with no results.
My windows 7 computer was connected to my home's wireless network yesterday perfectly normally. I drove last night to my mother's house and proceeded to connect to her own wifi router wirelessly. Although my sister's computer that's on windows 7 connects ably, and both our iPhones connect, my computer will not. My computer finds the network( it is unsecured without a password if that makes a difference ) connects, receives an ipv4 address in ipconfig, yet does not obtain Internet access. It labels the network as an "unidentified network".
View 2 Replies View RelatedI have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
View 5 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedI have set up access restriction times for my son (we have wireless access for all systems). I use the MAC address on his systems. Xbox, Kindle Fire and his Laptop. The MAC address are Correct. Here is the problem:
I set the "allow" and times from 6pm - 11:00 pm (while on xmas vacation) - the system works for a while he is shut off as i would like but....
After a period of time the entire house goes off line. I have to reboot the power on e2000 router and then disable the access restrictions. System then works. Problem is repeatable. What is the deal. I have updated firmware already. Otherwise the system works great. Never dies. Just when i set access restricions for a SPECIFIC time it kills entiore houese. BTW i can deny him outright 24/7 and the system idsables his access fine. Its just when i set specific times
when i try to log on to google chrom...it states not connect to the network...at thr bottom of the computer it say noy connected connection avaiable
View 1 Replies View RelatedWhen I look at the "network and sharing" page it saying that I'm connected same goes for the "Wireless Network Connection Status" page (which says "internet" in the "IPv4 connectivity" and "no internet access" in the "IPv6 connectivity"). But when the computer has to update It'll say "no internet access" and when i go on Internet Explorer it won't say anything instead the green loading bar on the bottom of the page will be stuck in the middle.
View 2 Replies View RelatedI have a laptop with an external Wi-Fi card.The Wi-Fi card is a D-Link AirPlus Extreme DWL-G650. The computer runs Windows 2000 Professional. (I don't know service pack #) So when I try to open the folder "Computer's Near Me" is comes up with an error message saying "MSHOME is not accessible. The network request is not supported." But I can access the laptop's shared resources with my desktop, and both computers can ping each other. The laptop can access the desktop's resources from running this code:\Computer NameFolderI am so confused.
View 2 Replies View RelatedI have network group set up for 5 computers and everything is okay except 1 computer, lets call it X, cant access files from computer, Y, but there arent problems with Y getting into X. On computer X a login screen pops up for computer Y password but it doesnt have a password and it still wont let me in. would it be better to set a password or is there a way to bypass that screen?
View 1 Replies View RelatedOne of my domain pc has ipv4 selected as to obtain automatically.How can I configure my DC to ping or access that computer?
View 1 Replies View RelatedI have Laptop[ with wifi connection. How to use it or How to access the computer via wifi.
View 1 Replies View Relatedwhy can't I access my hotmail account on my home computer but I can on my phone?
View 1 Replies View RelatedI have a newly configured windows XP computer and cannot get it to connect to my network wirelessly.
View 10 Replies View RelatedHow do I access shared folders over network XP pro v2002 sp3.I set up a network and have a workgroup called Workgroup. when I go to "entire network"->microsoft windows network->Workgroup and attempt to enter a certain computer I receive the message:"\comp_3 is not accessible. Yu might not have permission to use this network resource. Contact the administrator of this server to find out if you have access to permissions.Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again."What should I do? I have already enable netbios in the tcpip for the LAN for both computers. I have put on a password for the user of the computer that holds the file and subsequently get prompted on the remote computer, but even after entering the username and password of the host computer I still get this message. What do I need to do to access filesfolders on another computer?
View 2 Replies View Relatedhave a VPN set up through windows 7 at home. Until recently, I've always been able to connect to my VPN with my work laptop and access the files on my home computer. Now for some reason, my home computer no longer shows up under "network". I can connect to my VPN without issue, but the home computers just do not show up and I cannot access the files
View 1 Replies View Relatedok i have a brand new laptop with windows 7 set up and i made a new homegroup. there is also an old windows xp laptop hooked up to the same router.
View 2 Replies View Related#2) Laptop - Windows 7 Pro 32 bitI have advanced sharing settings exactly the same.Set to share files and folders on private network. Both computers on the same Workgroup. Set to use username and password rather than homegroup. On the desktop, I set my second hard drive to share a video folder. If I try to access it using \COMPUTER1NAMEVideo (the share path), I get a denied message.If I access the laptop from the desktop and transfer the file that way, it works just fine. The laptop is wireless. The desktop is hooked up to the router.
View 6 Replies View Related