Cannot Connect LG 3D LED TV To The Internet Via Wired Router
Jun 6, 2012
i was able to connect to the gateway and got stuck at the DNS SERVER i connected my pc to the network and found out these details
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8131 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 54-42-49-86-C2-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
[code].....
even after entering all the details manually after referring to the above details the connection settings stopped at the DNS SERVER. i got this error :Failed to connect the network. Cannot connect with a name server. Home netowrk is available. Check the DNS server address and contact the Internet service operator.
View 7 Replies
ADVERTISEMENT
Sep 8, 2012
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
View 6 Replies
View Related
May 24, 2011
I connect to the internet with no problem. when I connect the router I can't connect
View 1 Replies
View Related
Nov 25, 2007
My cable modem works fine when not running through the router. However, when running through the router, the internet won't work.I tried unplugging the power and plugging it back in, as well as holding down the reset button for 30 seconds, but nothing worked.
View 8 Replies
View Related
Mar 2, 2013
I have a WRT54GS router, and starting today I am completely unable to access the internet through it. If I connect my computer directly to my modem, I can access the internet, but if I try to connect through the modem, all I get is "DNS server not responding".I've tried changing the DNS server address on the router configuration page, but it doesn't work.
Here's what my ipconfig /all shows:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HomePCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : No
[code]....
View 3 Replies
View Related
May 12, 2011
I have 2 PCs and am using a Linksys befsr41 router.The first PC connects fine. The 2nd PC does not find a connection. BTW, when I connect my laptop to the 2nd port, it sees the connection immediately - the lights flash on the ethernet connection. No lights on the 2nd desktop PC.
View 2 Replies
View Related
Aug 18, 2012
Desktop won't connect to internet. I have a Belkin router and my laptops connect to the internet. My Netflix Rokus connects to the internet.I have tried your suggestion with reset winsock and reset IPv4 TCP/IP stack to installation defaults,etc. [code]
View 10 Replies
View Related
Dec 12, 2012
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies
View Related
Jan 11, 2011
I upgraded the firmware on my BEFS41 v4.3 to the Ver.2.00.4 Build 8, off the cisco website. After I received the successfully upgraded message, I could no longer connect to the internet, nor could I connect to the router's configuration page. I tried to do a few hard resets and connecting it to other computers to see any other computers could connect to it, no luck. I tried connecting one computer just to the router, without the internet plugged in, and tried to ping 192.168.1.1 but I received a "transmit failed, error code 1231." Is there anyway I can access this and change the firmware, or am I screwed?
View 3 Replies
View Related
Mar 2, 2011
My BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem. I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.
View 1 Replies
View Related
May 9, 2011
How to connect two PCs and one DSL router to get on the internet?I am getting IP conflict error on the PC. I can only connect one PC at a time to get to internet.
View 1 Replies
View Related
Feb 10, 2013
I have a Belkin F5D8636-4 v2 N Wireless Modem Router. For some reason, it will only connect to the internet if the wired computer is plugged in and on. I tried starting the router without it plugged in and it kept trying and failing to connect to the internet. As soon as I plugged in the wired computer it connected to the internet. jhb019 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies
View Related
Jul 24, 2012
I just brought my new PC build over to my grandmothers house and I can't connect to the internet on her connection. All I did was plug her Ethernet cable into my port on the back of my motherboard. I didn't touch any other cables or settings. It seemed to recognize there was a connection but said it was public and was trying to identify it. Then, I was unable to connect to the internet.
View 2 Replies
View Related
Aug 29, 2011
i have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
View 2 Replies
View Related
Nov 8, 2012
if I have my HP netbook connected to a wired or wireless connection I'm stuck on the "Acquiring network" prompt. I've followed along in previous threads up until a certain point. In the services page DHCP cannot start due to error 1075.
View 6 Replies
View Related
Jun 3, 2011
my laptop, as well as my moms laptop, were working perfectly fine on wedensday. Yesterday however, i was randomly getting kicked off the internet, and i came to realize that whenever both of our laptops were on, only one could connect to the internet. the other one couldn't find the DNS server or whatever.so, after some frustration windows finally told me (on my laptop) that two computers were sharing the same ip address on my network. made sense i guess. so i went to CMD, typed ipconfig /release on my laptop, but it said media was disconnected so it didn't work. i then went onto my moms laptop, typed the same thing in CMD, and it released it fine. but then her battery died so i plugged it in to renew her ip.
once her computer got enough of a charge to turn on i went to cmd and typed ipconfig /renew, but it wouldn't renew it, saying media was disconnected. so, now her laptop and my laptop will not connect to wireless.on my laptop, i transfered my documents to another HDD and did a fresh install of windows. but even since, my laptop will not connect to the internet. when i trouble shoot it it says something about no networking drivers are installed, but i can't even install drivers because i have no internet im on her laptop right now, it will connect via ethernet cable.
View 3 Replies
View Related
Feb 11, 2011
My friend's wireless internet just suddenly failed last night. She was watching Youtube videos, but had to do something, so she closed the window. When she came back, she couldn't connect, and was given an error, something about user connectivity.Her wired connection is still working.
View 5 Replies
View Related
Nov 9, 2012
I've recently moved house and have signed up with a new internet provider. I can't connect to the internet with a wired or wireless connection. My partner has got the wireless working perfectly on her laptop and I got wifi working on my phone with no problems, so I think it must be something specific with my computer.
I used a wireless connection in my old house, and I remember it took some time to get that working properly too, so obviously my computer doesn't like change!I'm now getting the IPv4/IPv6 connectivity messages and can't even get close to finding a network.
View 14 Replies
View Related
Apr 14, 2012
I have Samsung WiFi enabled phone,,can i connect it with my systems' wired internet connection..
View 1 Replies
View Related
May 21, 2011
I have one computer that is unable to connect to the internet. This is a wired desktop running Vista. I have several wireless devices around the house that can connect fine, so I know that it is not the internet. I have tried a system restore, I have reset the router and rebooted the computer. The network diagnostics says there might be a problem with one or more network adapters on this computer....I have tried all of those solutions as well. When I look at the device manager I see a yellow exclamation point beside "isatap.domain.invalid". Does this mean that my network card is out??? Computer is now out of warranty
View 12 Replies
View Related
Jul 13, 2011
my benQ joybook u105 cannot connect to wired internet. when i connect to modem, my netbook showed that the network is exist but no internet access. when i diagonas problems, it says the dns is not responding. But the modem is switched on already.
View 1 Replies
View Related
Sep 12, 2011
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
View 4 Replies
View Related
Jan 7, 2012
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies
View Related
Dec 5, 2012
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Just got my new TL-WDR4300 router. Set it up last night with the latest firmware. I can connect to Internet using a wired cable. However, I can't connect to Internet via wifi. I already tried 2 laptops (Vista & Win XP) and 2 tablets - I can see my wifi signal, connect to it (with my password), even obtained IP address (from ipconfig). However, when I tried to open a web page (eg google), it can't connect to Internet (always got timeout or service not found). Again, same laptop has no problem if I use a cable to connect to my router.
View 3 Replies
View Related
Mar 1, 2013
I currently have an old Linksys WRT54G router with 4 ethernet and 1 internet port. I have an old Sprint 660 modem connected to the router for internet access. I am also using 3 of the 4 ethernet ports for wired devices (main PC, NAS drive and Dish Network net access). I have another PC and a printer connected wirelessly to the router.Now, with my modem going bad, CenturyLink has provided a combo modem/router (EQ660DR-F1) to be used in place of my Linksys router/modem, providing wired, wireless and modem capabilities in one.My problem is that the new router/modem has only one ethernet port along with a DSL port. Obviously, I can connect my main PC to the ethernet port, DSL to the modem port and connect my 2nd PC and printer wirelessly as they are now. How I might connect my other 2 wired devices, possibly by a hub, AP or bridge or some other means? Can one of these be connected by wireless to connect the other 2 devices, or do these have to be connected physically by wire?
View 2 Replies
View Related
Dec 20, 2008
I just installed an RVS4000 router for a SOHO. I have no problem getting out to the internet so access from LAN -> WAN is working fine. The problem is with VPN access from the WAN.I created a VPN account and set up QuickVPN on a PC making sure I imported the certificate. I can connect to the router with no problem and I can even connect to the routers web admin page.But that's where it ends. I cannot connect in any way, shape, or form to PCs on the LAN through the VPN. I can't even ping them.Am I missing something in the setup of the router?
This is the only reason I bought this router as the old one was working fine. How to fix getting through the router to connect to the computers on the LAN.
View 9 Replies
View Related
Sep 15, 2011
I can connect to the router and connect to the Internet by by-passing the router, but can't connect through the router. firmware 2.51.4 is up to date, cables are all good. I can't find any diagnostic tools in the management screens - are there?
View 2 Replies
View Related
Dec 30, 2010
I recently tried to connect to my router via 192.168.1.1 (I've accessed it before) howvever this time it says the page is
unavailable. I've tried it several times for a couple days now and still it wont work. I have also tried 192.168.0.1
View 8 Replies
View Related
Jan 23, 2011
I cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies
View Related
Jun 19, 2011
I have a wireless network and I have a new TV that has wireless and wired connectivity. I do not have a wired port at the spot where the TV is mounted so I am connecting wirelessly. The problem is the wireless on the TV is pretty flaky and I cannot get consistent connectivity..and every time it can't connect I have to retype in the AP passwords as it doesn't remember them. I would like to switch the network to wired, but can't run an actual wire. Can I add a new wireless AP as a repeater or bridge to tap into the existing wireless network and then connect the TV to the a wired port on the wireless router?
View 10 Replies
View Related
May 10, 2011
LAN L1, with IP addresses 192.168.10.x, for Company C1
LAN L2, with IP addresses 192.168.11.x, for Company C2
I have networks separated: different racks (but very closer fisically: a wire can be thrown), different gateways (to DSL), but both LAN's must connect with each other. I have acquired two RV042, one for each company to create VPN's (permitting telejob).
View 1 Replies
View Related
Sep 27, 2011
I have this E4200 for about 3 months and allways has been used as an wireless router. Today i wanted to connect 2 wired computers to it via lan and whatever i do dosnt connect. Dosnt even let me acces the 192.168.1.1 page to router settings.I am on firmware 1.0.02, i also did a full reset and then did set up with cisco connect, did try that thing with the cisco usb connect and still no joy with the LAN conection.
One comp uses win 7 the other is on win xp. I can connect both comps succesfully to other router via the gigabit ports but not to this one.
View 3 Replies
View Related
Mar 14, 2011
I have successfully configured my Cisco RVS4000 for VPN Access, and Installed QuckVPN on my client machine. I can connect using QuickVPN no problem, but I cant access anything on my network. When I try pinging any of my servers I am unable to do so. I can ping my gateway thats about it.
View 1 Replies
View Related
