I just brought my new PC build over to my grandmothers house and I can't connect to the internet on her connection. All I did was plug her Ethernet cable into my port on the back of my motherboard. I didn't touch any other cables or settings. It seemed to recognize there was a connection but said it was public and was trying to identify it. Then, I was unable to connect to the internet.
View 2 Replies
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies View RelatedI have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View Relatedis it possible to connect between 2 networks (different ips)? i have a wired ethernet group n a wireless group, my printer is on the wired group, my laptop on the wireless one.
View 1 Replies View Relatedi was able to connect to the gateway and got stuck at the DNS SERVER i connected my pc to the network and found out these details
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8131 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 54-42-49-86-C2-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
[code].....
even after entering all the details manually after referring to the above details the connection settings stopped at the DNS SERVER. i got this error :Failed to connect the network. Cannot connect with a name server. Home netowrk is available. Check the DNS server address and contact the Internet service operator.
I have a Belkin F5D8636-4 v2 N Wireless Modem Router. For some reason, it will only connect to the internet if the wired computer is plugged in and on. I tried starting the router without it plugged in and it kept trying and failing to connect to the internet. As soon as I plugged in the wired computer it connected to the internet. jhb019 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View RelatedI have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
View 2 Replies View RelatedIt all happened pretty suddenly, from 1 day to the other, suddenly i was unable to connect to my home network. I started to troubleshoot, search forums etc. But no luck. I triedand look for the problem myself and found that thenetwork was enabled but it stayed on "identifying network". By clicking buttons from here and there on thecontrol panel i found something like a network recognition or something like that and a yellow little prompt appeared on the top of the explorer saying something like the network idetification was disabled, so i clicked and selected enable but it prompted again, so i just entered to the advanced network recognition center and noticed that on the public and private tabs netowrk recognition was disabled, so i clicked enable on both and saved changes, but the changes dont save, its like if i wasn't on a administrator account (but i had no error messages, it just wont enable).
View 19 Replies View Relatedi have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
View 2 Replies View Relatedif I have my HP netbook connected to a wired or wireless connection I'm stuck on the "Acquiring network" prompt. I've followed along in previous threads up until a certain point. In the services page DHCP cannot start due to error 1075.
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
my laptop, as well as my moms laptop, were working perfectly fine on wedensday. Yesterday however, i was randomly getting kicked off the internet, and i came to realize that whenever both of our laptops were on, only one could connect to the internet. the other one couldn't find the DNS server or whatever.so, after some frustration windows finally told me (on my laptop) that two computers were sharing the same ip address on my network. made sense i guess. so i went to CMD, typed ipconfig /release on my laptop, but it said media was disconnected so it didn't work. i then went onto my moms laptop, typed the same thing in CMD, and it released it fine. but then her battery died so i plugged it in to renew her ip.
once her computer got enough of a charge to turn on i went to cmd and typed ipconfig /renew, but it wouldn't renew it, saying media was disconnected. so, now her laptop and my laptop will not connect to wireless.on my laptop, i transfered my documents to another HDD and did a fresh install of windows. but even since, my laptop will not connect to the internet. when i trouble shoot it it says something about no networking drivers are installed, but i can't even install drivers because i have no internet im on her laptop right now, it will connect via ethernet cable.
My friend's wireless internet just suddenly failed last night. She was watching Youtube videos, but had to do something, so she closed the window. When she came back, she couldn't connect, and was given an error, something about user connectivity.Her wired connection is still working.
View 5 Replies View RelatedI connect to the internet with no problem. when I connect the router I can't connect
View 1 Replies View RelatedI've recently moved house and have signed up with a new internet provider. I can't connect to the internet with a wired or wireless connection. My partner has got the wireless working perfectly on her laptop and I got wifi working on my phone with no problems, so I think it must be something specific with my computer.
I used a wireless connection in my old house, and I remember it took some time to get that working properly too, so obviously my computer doesn't like change!I'm now getting the IPv4/IPv6 connectivity messages and can't even get close to finding a network.
I have Samsung WiFi enabled phone,,can i connect it with my systems' wired internet connection..
View 1 Replies View RelatedThe netbook was working fine on wireless network; didnt use it for a couple of days - now I cannot conenct wired or wireless; cannot see the wired or wireless modem , only MSN dial up. But the wireless modem light is blinking steadily. Otherwise the netbook is working OK - it even seems to boot up quicker than it used to)(I would reinstall the OS but it didnt come with OS DVD or a DVD drive ; so I didnt create a backup when I bought it. I have since purchased a USB DVD drive; this is one of two identical netbooks I purchased on black Friday - other one works perfectly?
View 2 Replies View RelatedI just wanted to know the advantages and disadvantages of wired over wireless network connections
View 2 Replies View RelatedI have successfully configured my Cisco RVS4000 for VPN Access, and Installed QuckVPN on my client machine. I can connect using QuickVPN no problem, but I cant access anything on my network. When I try pinging any of my servers I am unable to do so. I can ping my gateway thats about it.
View 1 Replies View RelatedMy laptop is the E6420 and I cant connect to the Internet, the little wireless icon doesnt even show up in the taskbar. tried to set up a new network, didnt work, it says the modem's been removed. but no other info.
View 2 Replies View RelatedMy cable modem works fine when not running through the router. However, when running through the router, the internet won't work.I tried unplugging the power and plugging it back in, as well as holding down the reset button for 30 seconds, but nothing worked.
View 8 Replies View RelatedI have a WRT54GS router, and starting today I am completely unable to access the internet through it. If I connect my computer directly to my modem, I can access the internet, but if I try to connect through the modem, all I get is "DNS server not responding".I've tried changing the DNS server address on the router configuration page, but it doesn't work.
Here's what my ipconfig /all shows:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HomePCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : No
[code]....
I have 2 PCs and am using a Linksys befsr41 router.The first PC connects fine. The 2nd PC does not find a connection. BTW, when I connect my laptop to the 2nd port, it sees the connection immediately - the lights flash on the ethernet connection. No lights on the 2nd desktop PC.
View 2 Replies View RelatedI live on a school campus of sorts, with several wifi connections and routers (all of which I have access to, and can reset, etc). Normally I have no problems connecting to any and all wireless routers. Recently, my internet quit without warning. I've tried connecting via a hardline, and I've tried resetting pretty much every router and connection on campus, with no luck. Everyone else is still able to connect with no problems.When I connect to a campus wireless connection, it connects, but gives me the error "rseau non identifi, pas d'acc�s Internet" (translates to "unidentified wire/network, no internet access"If I run diagnostics on my network card, it finds the problem as an invalid IP configuration:
"Problmes trou - Connexion seau sans fil 3 n'a pas de configuration IP valide"
If I run ipconfig/all, I get the following:
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.
C:UsersUtilisateur>ipconfig /all
Configuration IP de Windows
[code]....
I'm desperately trying to set up my old D-Link DI-524 on my parent's Toshiba laptop...I'm visiting and going thru withdrawals! I've installed it, run the wizard etc but it doesn't work...not even wired. I've tried various cable configurations and I get nothing. Both cables are good and work just fine connected to the modem. I've reset it a few times, upgraded the firmware and still nothing...I'd think I'd at least get it to work hard wired. My laptop can see the network I set up even...but no data transmission. I'm not a wireless expert, but I need to become one fast!
View 3 Replies View RelatedI'm sure it's on here but because I dont understand the name of what I'm looking for, I'm having trouble searching. My main network is setup for wireless via a netgear wndr3700. I'd like to use my old linksys wrt54g v5 to connect to that network wirelessly and allow me to connect my xbox via wired ethernet. Basically instead of buying a wireless adapter for the xbox, i'd like to know if/ how i can use my linksys router instead.
View 13 Replies View RelatedI have one computer that is unable to connect to the internet. This is a wired desktop running Vista. I have several wireless devices around the house that can connect fine, so I know that it is not the internet. I have tried a system restore, I have reset the router and rebooted the computer. The network diagnostics says there might be a problem with one or more network adapters on this computer....I have tried all of those solutions as well. When I look at the device manager I see a yellow exclamation point beside "isatap.domain.invalid". Does this mean that my network card is out??? Computer is now out of warranty
View 12 Replies View Relatedmy benQ joybook u105 cannot connect to wired internet. when i connect to modem, my netbook showed that the network is exist but no internet access. when i diagonas problems, it says the dns is not responding. But the modem is switched on already.
View 1 Replies View RelatedDesktop won't connect to internet. I have a Belkin router and my laptops connect to the internet. My Netflix Rokus connects to the internet.I have tried your suggestion with reset winsock and reset IPv4 TCP/IP stack to installation defaults,etc. [code]
View 10 Replies View Related[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies View RelatedI upgraded the firmware on my BEFS41 v4.3 to the Ver.2.00.4 Build 8, off the cisco website. After I received the successfully upgraded message, I could no longer connect to the internet, nor could I connect to the router's configuration page. I tried to do a few hard resets and connecting it to other computers to see any other computers could connect to it, no luck. I tried connecting one computer just to the router, without the internet plugged in, and tried to ping 192.168.1.1 but I received a "transmit failed, error code 1231." Is there anyway I can access this and change the firmware, or am I screwed?
View 3 Replies View RelatedMy BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem. I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.
View 1 Replies View Related
