My lan ip address is 192.168.1.45 and when I try to ping 192.168.1.63 it comes "request time out".but I went and check 192.168.1.63, it's up and working. I can ping other ip addresses though.
View 8 Repliesi have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies View Related2 windows 7 machines.at work..They are both laptops. one acts as a server for a piece of software to the other one.on the "client" laptop I can map a drive to the "server" and browse files through that maped drive etc.I can also ping the IP address of the "server" but I get a timed out when I try to ping the computer name.Server had Macafee firewall, I uninstalled that, and I turned off Windows firewall on both machines.the software needs to be able to ping by name I guess in order to work..
View 2 Replies View RelatedI bought a usb printer server to connect my usb printer to my router. USB cable to the print server and cat 5 from the print server to the router. The print server has a static fixed ip of 169.254.10.10 and a subnet mask of 255.255.0.0 I can ping the printer server and it works perfect from my windows 7 laptop. When I attempt to set it up on my windows xp (SP3) laptop I am not even able to ping the 169.254.10.10 address. On the windows 7 laptop i can navigate to the print servers menu by placing 169.254.10.10 in the address bar of internet explorer. No so with the xp laptop.What is different about the ip configuration between win xp and win7. how to get the xp laptop to "see" the print server. Want to keep the print server at the default settings if possible.
View 22 Replies View RelatedI have a HP Pavilion DV6000 that I just tried connecting to my network through wireless. It says connected, pulls an IP adress, and gets the gateway but it will not pull up web pages, ping google, or ping any other computers on the network.. I have one other computer connected to the network, wired. It can connect fine to webpages, but it wont ping the HP laptop. The router interface shows that it's giving the HP an IP but thats all it seems to be doing..
View 2 Replies View RelatedWe recently upgraded to Windows 7 at work and my laptop was part of the first deployment. Laptops are imaged so that all configurations/software are already set and done. My problem is as follows, my laptop is part of domain, when I am at work I can ping anything just fine (network computers, printers) BUT when I am at home, I can't even ping my own PC. It returns back with the same address over and over. No matter what I ping when I am at home, it returns back with the same address. I can ping blah and it will display same address over and over. The weird part is I can ping websites no problem, but if i ping random names it will format as follow.Lets say I want to ping lost, below is what i get (I made changes to hide domain and IP)
Pinging lost.domain.com [70.99.199.99] with 32 bytes of data:
Reply from 70.99.199.99: bytes=32 time=57ms TTL=50
Reply from 70.99.199.99: bytes=32 time=58ms TTL=50
Reply from 70.99.199.99: bytes=32 time=57ms TTL=50
Reply from 70.99.199.99: bytes=32 time=58ms TTL=50
[code].....
Notice how my domain always shows up? When I am connected to the VPN at home, I have to log onto our intranet using the IP, I can't use the name, it wont direct to it.
I'm running into a strange problem and cant seem to figure it out. I have an asa running 8.2(1). I have an ipsec vpn setup and working great. I can ping hosts on the inside of the network and everything seems to be fine. However there is one single ip address that i know for a fact is live, but i cannot ping through the vpn. If i ping the address from the asa i get a reply, if i ping the address from inside the network i get a reply, but if i ping when connected through the vpn no reply.
View 4 Replies View Related i have a site to site vpn stablished, the vpn works fine (while is up), i have a cisco asa 5520 and the other end of the vpn is a jupiter device that for technical reasons needs to send a continuos ping and when it does not receive a reponse back it brings down the vpn tunnel and reestablish it again. while the vpn is up traffic flows perfectly but because i m unable to repond to the ping the vpn is brought down as reestablished by the jupiter device. the jupiter device pings the encryption domain which is an ip that is natted to the real ip in the inside network. this is my configuration of the vpn:
AAA.AAA.AAA.AAA is the ASA public ip in the outside
BBB.BBB.BBB.BBB is the jupiter device ip (part of the object group IP_LIST)
CCC.CCC.CCC.CCC is the nat ip on the ASA
10.21.0.164 is the real address in the inside(code)
After I changed customer router to CISCO 2911 from H3C firewall, the WAN interface can not ping its gateway after about 10 minites, I do not know why. it works well before I change the device. [code]
View 10 Replies View RelatedI have a problem with an ACE 4710 regarding to the ping of especially one VIP address.
[code]...
At the Box I setup 10 Servcies, all with different VIP addresses, also the IP is not used duplicate somewhere in the network.
in the class defined under Policy-Map Multi-Match I setup identical to the others loadbalance vip icmp-replay active, the VIP is usable by the defined service http, the serverfarm is up and running all ok so far but this VIP does not respond to ping even the correct arp resolution was done.
I started also a capture locally on the ACE and see the ICMP - Echo coming in, but the box sends no echo-reply back.
In the access-lists Management and so on I allowed icmp and also on all interfaces the icmp guard is disabled...
We are trying to isolate the fault. From Aggregator a router, we are receiving MAC address of distant end ethernet interface of a SDH box and vice versa is also possible. However ther is no packet received. My question is does ping test is must to see if the path is through or just receiving MAC adress at both ends would mean that packets have to go over the path.
View 1 Replies View RelatedI would like to allow PING on RV042 from WAN side only from specific IP address, but when I set the rule, RV042 does not respond on WAN side, because Block WAN Request is Enabled.BUT! When I disable "Block WAN Requests", now any IP can ping my router from WAN side. Although I set access rule to Deny Ping from WAN side to anyone, it still responds.
View 1 Replies View RelatedI have Latitude E6410 and connect to internet through wireless network to Zyxel ADSL modem. My problem has started 20 days ago when I was connected then I was disconnected from internet. The status is as below:
- I can ping the modem which means the laptop the link between modem and laptop is working while I can not ping any address or website even the provider's DNS. At the same time, if I connect the LAN cable, every thing is working properly. I tried with different laptops and there was no problem. To resolve the problem temporarily, I have to restart the modem or change the IP for my wireless card. In this case it works for another 30-60 minutes. the issue is the same when I use different modem.
I have the switch ============>>>>>
sw2960g============server linux
As u see above , the inetrface Gi0/6 , Gi0/7 are connected directly to linux server by two redundent links .
I mean that Gi0/6 is connected to interface0 in linux server
and Gi0/7 is connect to interface interface1 in linux server
Gi0/6===>vlan 1
Gi0/7===>vlan 2
each interface of linux server has a different ip and different gateway .
Now from switch, I make ping to interface 0 of linux server and i have a reply , every thing is ok but when i type the command :
#sh mac address-table | i Gi0/6
There is no Mac addresses and seems no Mac address relative to Gi0/6, I mean that doesn't it mandatorty to learn the mac address of linux server and write in mac table relative beside interface Gi0/6 ? How I could ping the server but no mac beside Gi0/6 ?
We have 3 WAP4410N on our network. Our laptops pick them up but I cannot access the configuration Utility or ping the default IP address. If their IP addresses have been changed how do I find out what their current IP adds are? We currently use static IP addressing for our network.
View 2 Replies View RelatedI switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.
View 2 Replies View RelatedMy computer is a 32 bit, Win7 SP1 with Pentium Dual Core 2.6 Ghz and 2Gb of Ram on a wired network. My wife has a similar system using a wireless network. She can ping my IP Address, but I cannot ping hers. We both have full access to the Internet. We are using the same workgroup, and both computers have file and printer sharing enabled and IPv6 addresses and DNS server addresses selected automatically.The problem appears to be with my computer?
Here are my system stats:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Intel(R) G41 Express Chipset, 782 Mb
Hard Drives: C: Total - 76308 MB, Free - 49226 MB; D: Total - 286167 MB, Free - 52893 MB; M: Total - 38154 MB, Free - 7 MB;
Motherboard: ASUSTeK Computer INC., P5G41-M LE
Antivirus: Microsoft Security Essentials, Updated and Enabled
The issue i was having is when i connect to 192.168.50.* network i cannot seem to ping or connect to 192.168.51.2 (esxi host1) and 192.168.51.3 (esxi host2) and also free nas device i.e 192.168.52.2. i can only connect to these devices if i ping the 192. 168.50.1 from both the esxi hosts and also from free nas. Everything starts working if i ping from the esxihosts & Freenas device to 192.168.50.1.
f i connect to the hp procurve switch i can ping the hosts fine from the switch not when i connect to Draytek Router i.e 192.168.50.1 unless i run a ping from esxi hosts and free nas device then everything starts working.Here is my network setup for my ESXI home lab.
I have Draytek Vigor 2800 Router with ipaddress 192.168.50.1 (This Router is Downstairs and connected to DSL Line) and another Router with Firmware flushed with DD-WRT and IP address for this is 192.168.50.2. (this router is in upstairs labroom and is connected in Wireless Bridge Mode to Draytek Router Downstairs)
There is a HP Pro curve Switch 2610-24 with IPaddress of 192.168.50.3 and has VLAN's configured on this switch.The VLAN's are : VLAN10 is esxi vlan and ipaddress is 192.168.51.1 and vlan20 is storagevlan and ipaddress is 192.168.52.1 and vlan 30 is internet vlan and ipaddress is 192.168.50.3 (Switch Address).Port 24 is untagged to vlan 30 i.e internet vlan and connnected the port to dd-wrt router lan port. I have untagged ports 1 to 5 to vlan10 i.e esxivlan and connected esxi host's 1 & 2 to ports 1 and 2 respectively and connected freenas device i.e storage to port 6 which is untagged to vlan20 i.e storagevlan
IP Routing is enabled on the switch and ip route 0.0.0.0 0.0.0.0 192.168.50.2 and Default gateway on the switch is 192.168.50.1.
On the Draytek router i have configured a static route for 192.168.51.0/24 and Default Gateway is 192.168.50.3 and another static route 192.168.52.0/24 and default Gateway is 192.168.50.3
I have a very strange problem affecting my LAN. New entrants to the network can ping successfuly but cannot browse. Rest of the pcs that have been on the network before are browsing quite fine. Even when I connect new PC directly to the router LAN ports, problem still persists. I've tried four different new laptops so far. I've even intalled a new router to no avail.
View 19 Replies View RelatedI can ping all the devices on my network but cannot browse any pc/server, mapped drives now disconnected. I can access the laptop from another machine and can browse the internet from the laptop. It has windows 7 ultimate. I have tried everything from forums, sfc/ scannow, flushdns, all services started.
View 12 Replies View RelatedOther machines on my network can't seem to be able to see my machine, but i can ping them all. It can't be anything to do with the authentication because i have just reformatted my machine and re-added my machine to the AD.
View 1 Replies View Relatedi'm having some problems to configure.i have two sites, a primary site and the secundary site, in both sites every switches are layer two. I configured and activated the RSTP (802.1W) in every switch, but about every 30 minutes the topology change and happening a delay in network and loss some ping (ICMP).
[Code]...
I'm trying following this for setting up 2 routers: [URL]I see the 1.1 is able to ping 1.2 but 1.2 is not able to ping 1.2 why?
View 4 Replies View RelatedCannot Ping System but system can ping everyone on the network accessible
View 2 Replies View Relatedrecently I've noticed sharp spikes on both my wireless and wired network connections, It's safe to say it's not a network card problem as all PCs are experiencing this problem. I ran a tracert and these are the results:Tracing route to [URL] [209.123.109.175]over a maximum of 30 hops:
1 4 ms 3 ms 9 ms 192.168.1.1
2 242 ms 33 ms 29 ms 10gi6-0-0-100.bras1ldv.akl.vf.net.nz [203.109.12
9.41]
[code]...
Trace complete.As you can see there is packet loss and a huge spike in ping time.
I can't ping from the 192.168.50.0/24 network on Cisco Router 1. The router is connected with network 192.168.1.0 to a linksys router. I also can't ping from the linksys router to a IP address that is connected to the cisco router.
View 3 Replies View Relatedi'm configuring the network using static routing from the information above. can i know why i'm unable to ping from pc 1 to pc2 and pc0 to pc2?
View 8 Replies View RelatedIn the office we have 3 printers (2 network 1 attached locally to my machine). I can ping all of the printers and no packets are dropped, however I cannot connect to them.I know the printers arent faulty because all of the other staff have no problems printing.I have tried re-installing drivers, disconnecting the printer and reconnecting it etc. and I just cant find what the problem is
View 4 Replies View Related... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
A few days ago the internet on my desktop was working fine. now it has the 'limited or no connectivity' sign on it and i have done a few things to try and fix this. I started by trying a simple repair. it comes up with 'the following action can not be completed: Renewing your IP address' This lead me to try and restart my PC and router with no luck.
I then decided to look a bit further into it and went ito CMD and flushed the DNS. i then did 'ipconfig /release' which generated the response 'IP address for adapter wireless connection 9 has allready been released'. I then did 'ipconfig /renew' to which it generated an interestin response:
'An error occurred while renewing interface wireless network connection 9 : The RPC server is unavailable'
I have made sure my DNS client is on automatic, alont with my RPC (this was uneditable). Its not a router problem as i have had multiple devices connected before and my laptop is working just fine connecting wirelessly.
The is VLAN id setting in some network/LAN interface .... how can I ping this lan/network interface in XP ..any freeware can do it ???
View 1 Replies View RelatedAbout a week ago, our network started to experience complete failure.
Our Equipment:
Router: Netgear FVS336.xxx
Switch: Dlink DES-1024D (we have 6 of these switches in our building)
Wifi Routers: Dlink DIR-601, Linksys wrt54g, wrt54gv2
Computersservers: 40x
Copiersfax: 5x
Wireless clients: (iphones, laptops) at least 30
All has been working together in harmony for many years.Fast forward to last week when my hell began with intermittent crashes.Not sure what's causing the problem.When it happens, everybody loses their internet, the ability to communicate over the network; ping tests won't respond to anything (including the router) that exists on the lan, even with a static IP against other statics.In visually inspection of the switches and router, they seem to be happily blinking away with no apparent issue (visually).The only way I've been able to fix the problem is by power cycling the router.About 1 second after doing that, we're back in action for 2-6 hours (very unpredictable).I never had to power cycle any other devices)
Steps I've taken in troubleshootingeliminating potential culprits:
Replaced the router with a spare (new) FVS318G
Replaced the power supply for the router (suspected because problem remained after router swap)
Replaced cable going from router to lan switch
Removed linksys wifi router from network (the router had needed power cycling weekly and was old. So I unplugged it)
Removed Dlink wifi router from network (I hate dlink routers, so removed it).I'm at a loss.
I use a Buffalo Nas LinkStation WXL server to back up my files and data. It has been working perfectly and we have saved some files and data in it.However, we turned it on one day and it had disappeared from the list of Computers on the network and for a while now we haven't been able to get in. It is not showing in the list of Computers in Network and its webpage keeps coming back as "Unable to Connect" or "Taking to Long to Respond".The server is visible on the router's webpage under DHCP Clients List and we can ping the server and get a reply. But none of the laptops on the network can view it neither can I (the administrator) get access to it via its webpage?
View 1 Replies View Related