Cisco :: 2950 / 2960 - LMS Config Deployment With New Device
May 20, 2013
I have recovered some configuration files from my 2950 switches with the Configuration Archive Tool in LMS.
Now, I'd like to replace my old 2950s by 2960 switches, which have the same number of ports.
Will there be any issue if I copy the exact same config from 2950 to 2960 ? Will some features not work or is everything interoperable ? Here's an extract of the config :
Global
version 12.1
no service pad
service timestamps debug date time
service timestamps log date time
no service password-encryption
[ code]....
View 2 Replies
ADVERTISEMENT
May 21, 2012
How can we restore ACS config from an existing backup file, in an ACS cluster deployment? is it through CLI? with"restore"or"acs restore" command? and should I restore only the ACS config or both ACS and ADE-OS config?
View 4 Replies
View Related
Feb 17, 2013
how to port configuration from a cisco 2950 to a zyxel gs1910. the configuration on the cisco is pretty staright forward. I need to configure an uplink port to the router which can handle all VLAN which currently looks like this
View 1 Replies
View Related
Feb 11, 2012
i have come across this solution to dual internet connections, c2950-i6k2l2q4-mz.121-22.EA14.bin is the IOS and the router is a 2950 Dual Wan model. I don't know alot about this stuff I'll admit, but it is on the default configuration with IP 192.168.27.7 255.255.255.0, gateway at 192.168.27.8. The hostname below is something I don't know exactly what it means but my guess is its the line at the command prompt with the name.
It has VLAN1 with fa0/1-24, gi0/1 - 2.
This is the script but I don't know why its not taking the commands as at ip sla monitor 1 I get invalid command error. What do the ! mean are they comments and not entered?
View 4 Replies
View Related
Jan 2, 2013
Is it possible to run VTP V3 on 2950 and 2960 switches. If so what version of IOS supports V3? Our 2960s are running 12.2(25r)SEE1, and 2950s are running 12.1(22)EA4a. Neither of which supports v3.
View 3 Replies
View Related
Feb 6, 2007
I have tried the config-register command and it is not available. Here is part of the show ver command. I want to change the config-reg from 0xF to 0x2102.I have run into this before but don't remember how to correct it.....I think I have to use the boot command but not sure. Here it the output show ver Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
System returned to ROM by power-on?System image file is "flash:c2960-lanbase-mz.122-25.FX/c2960-lanbase-mz.122-25.FX.bin"cisco WS-C2960-24TT-L (PowerPC405) processor (revision A0) with 61440K/4088K bytes of memory.last reset from power-on
4 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Model number : WS-C2960-24TT-L
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(25)FX C2960-LANBASE-M
Configuration register is 0xF
View 6 Replies
View Related
Nov 12, 2012
I am aware that private-vlans are not supported on edge switches like 2960 series - so my question is would it be possibel to ceate private vlans on say just the core switch which would be a 3570 or 4506 that supports private vlans and then just trunk these to the edge like normal vlans?what I need to achive is to have edge port not able to communicate to each other even across switches - which cannot be done using 'protected' port so need the private vlan feature?
View 1 Replies
View Related
Feb 11, 2012
With out using any server, will DHCP be configured in cisco 2950/2960 switch?I man cisco it self should work as a dhcp server also.
View 10 Replies
View Related
Dec 8, 2011
How do you enable multicast traffic on 2900 series switches?
View 7 Replies
View Related
Feb 18, 2011
I have a number of class-'c's as a hand-off from my data center fiber to my 2960, which then sprawls the racks with about many 2950 switches, mostly 20 machines per switch. To allow machines on one 2950 to push data to another 2950 without routing back to my ISP's router(which costs money for bandwidth) isn't is possible to trunk one port on each 2950 to another 2950 and adding a addititional vlan8 to them. Then data jumps from 2950 to 2950 without going back to the 2960 or mainly not going back to my ISP's router. Is this the correct way to accoplish this with extra vlan and trunking the 2950's to each other or am I looking at this all wrong?
View 1 Replies
View Related
Aug 27, 2012
I have more than 20 Cisco switches in my office which is basically a soap manufacturing factory. The switches include Cisco 2950, 2960, 3560, 3750 etc. We have routers also which include 2821, 2951 etc. We also have Cisco WLC 2125 and LAP 1262 series. Sometimes all these devices management comes very tough to us.
We need to log on to different devices for troubleshooting/network management which sometimes becomes very tough to us. So I wonder if there any Cisco applications or tools by which we can centrally manage all these devices.
View 2 Replies
View Related
May 21, 2012
We are currently running Cisco prime 4.1 and want to make sure there is a backup of the configurations from our switches and routers. The VLANconfig is not collected according to the devicestatus dashboard. i am aware there were a known issue with LMS running on a virtual server and vlan not being able to be collected, is this issue resolved? i have tried the various workarounds with TAC support and it hasnt worked. We have the running and startup config collected for our devices when looking at the device status dashboard. does this mean if a switch crashes we can restore the config to a new switch immediately?
i saw there is a version 4.2. maybe this version resolves the issue with LMS on a virutal server? i cannot find the download to upgrade to 4.2 in the support section though.
View 1 Replies
View Related
Oct 17, 2012
I have a number of devices such as Cisco Call Manager, or Cisco Wireless Controllers, etc that I want to remain in DCR but would like to exclude from the Config Archive process. Is there any way of excluding an individual device from this process?
View 3 Replies
View Related
Feb 8, 2012
I have a scenario where 15 c500 switches and 5 2960 8 port switch connected to 4507R core switch. There are 10 dhcp pools created on the 4507.
Eg: ip dhcp pool XXXX
network xxxx.xxxxxxx
default-router x.x.x.x
Now the default router is directed to vlans created on the switch i.e vlan 101, 102, 103 and so on. Now the remaining switches connected are configured to be in the same vlan. So the systems connected to the edge switches will get the DHCP ip automatically, Now my problem is after sometime (may be 2 or 3 hrs) all the edge switches are losing configuration automatically even though it's not restarted, even after saving the config on to nvram, everytime I connect the console and check all the saved config is lost?
View 1 Replies
View Related
Jan 14, 2013
We have LMS Prime 4.2. I know how to view the running config on a single device. How do I run a report that will pull all the running configs of all my devices in one report? I'd be able to same them as one big pdf or text file. ]
View 1 Replies
View Related
Jan 9, 2013
I have a /28 subnet between my internal and external firewalls for L3 connectivity. On our internal firewall, I have a default route for internet traffic pointing to the external firewall (10.10.1.2).
We will be inserting a web filter appliance as indicated on the diagram. The appliance requires an IP address to be assigned to the LAN interface.
What is the best way to accomplish this with minimal impact? Will my default route on my internal firewall have to change to the IP of the web appliance if I address the web appliance on the 10.10.1.x subnet?Should I address the web appliance on the 10.10.1.x subnet to begin with, or create a vlan on the 2960 and a L2 interface on one of the firewalls?
View 1 Replies
View Related
May 18, 2012
My environment have two device ,a cisco css11501 and a cisco 2960 ,when I reboot CSS11501 then 2960 shutdown fa0/41
I command "sh logging | in 0/41" just up down two time,not five times in 10 seconds
.May 17 11:13:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/41, changed state to down
.May 17 11:13:19: %LINK-3-UPDOWN: Interface FastEthernet0/41, changed state to down
.May 17 11:14:53: %PM-4-ERR_DISABLE: link-flap error detected on Fa0/41, putting Fa0/41 in err-disable state
.May 17 13:44:35: %LINK-3-UPDOWN: Interface FastEthernet0/41, changed state to up
.May 17 13:44:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/41, changed state to up
View 4 Replies
View Related
May 1, 2013
i have a device connected to 2960 switch. It is an access port and i could ping the device from other switches , also from outside the lan. But i am not able to ping the device from 2960 switch alone. I suspected and checked the arp table and it was showing as incomplete. I created the manual arp entry and tried pinging but no luck.
View 14 Replies
View Related
Nov 12, 2011
when am trying to plug a PC into the switch, it takes power as the switch is POE . but when trying to plug IP Camera Device it does not take any power. although i have cisco 2960 - 24 ports both PC and IP Camera getting power. while troublshooting by #show power inline , i get nothing as well.
View 6 Replies
View Related
Jun 20, 2012
I have some 2960 switches with Lan Lite ios in my infrastructure.And I try to configure them to support "trust device cisco-phone" and "switchport priority extend cos 0" on ports with cisco phones.But LAN Lite image does not support "mls qos trust device cisco-phone".can I use any workaround to trust cos of cisco phone and to remark PC traffic with cos 0?
View 1 Replies
View Related
Apr 17, 2012
If i connected the latop to brand new out of the box ASA 5505 through consloe cable and i have a config file on this laptop from other ASA5505, is there anyway i can upload that config file into startup-config of this new ASA5505 through console cable, without using TFTP or FTP?
View 5 Replies
View Related
Nov 15, 2009
I have a Cisco 2811 router and when I turn of the router the running config is lost. I have to the following to get the router running of the start-up config settings.
router#copy start-up running-config
View 9 Replies
View Related
Sep 13, 2011
I am currently testing Energywise deployment on LMS 4.0 with the 3 month evaluation. I am running into some issues and have some other queries that i cant find documented or on the forum.i have gone through the prep and upgraded 2 switches through lms which has been successful. i have created my domain, grouped some test endpoints and have been able to push this config out to the switches.I created a policy and have tried to push this out to endpoints but the job keeps failing. there is no error detail on the job failure task. i see that it uses protocol "EnergyWise Domain Query" and not netconfig which lms used to push out initial config? Is there somewhere in the logs i can check what is failing?I know i can apply this manually on the switch but i want to see if i can get lms to do this as i may be something one of our customers may use.
View 1 Replies
View Related
Feb 7, 2012
I have an existing stack of 4 x 2960-S switches connected by stack cables.I would like to add another 2960-S switch to the stack but am unable to as the 2960-S will only allow 4 x 2960-S switches per stack.how I would add the 5th 2960-S switch to the existing stack of 4 x 2960-S switches.
View 12 Replies
View Related
Feb 11, 2013
I have a 24 port 2960-S that is not communicating with a 2960-LST that it is directly connected to over fiber. The link is up on the LST but will not come up on the -S. What command should I use to bring up this link? I have tried no shut from the (Config-if)# prompt.
View 3 Replies
View Related
Oct 15, 2012
We are currently using Cisco VPN Client. I'm looking to migrate to Cisco Any Connect. Our ASA 5520 has 750 IPSec and 2 SSL license. I also have approximately 40 IPSec site to site VPN's on this. ,Will anyconnect interfere with the site to site tunnels?,If I setup anyconnect with the IPSec instead of SSL do I still need to purchase the premium or essentials license?,Lets say if I do have to get the license and I get essentials will it cause any issues with the site to site VPNs?
View 2 Replies
View Related
Sep 28, 2012
I have a custom that needs to deploy a wireless solution, in attach plan, does not want a solution with WLAN controller.I proposed a solution with AIR-AP1024N-E-K9. What solution should implement in order to have a good coverage? Repeater, bridge point-to-point, point-to-multipoint, or something else ?
View 7 Replies
View Related
Feb 12, 2013
My customer has this OOOLD deployment where some AP1231 are still working they are upgrading part of the WLAN to LWAPP but may need to leave some AP in stan alone for a while.I need to configure a new SSID that needs WPA2 enterprise AES but it seems that this version does not support WPA2. If it doesn't, from what version on is supported?
View 9 Replies
View Related
Feb 9, 2012
I have a question about my ACS redundancy deployment. I bought three ACS all of them came with base license. but i bought large deployment license my question is necesary to buy the large deployment license to add two seconday ACS to my Primary ACS ? now if I install the large deployment in my primary ACS it replique to other ACS or I have to install first the large deployment one by one (secondary ACS) before to join to the Primary ACS.
View 1 Replies
View Related
Jun 28, 2010
I have this Wireless deployment :
Main Site: WLC AIR-CT5508-50-K9
WCS 6.x for 50 APs
(32 ) AP 1140
02 Remote Sites : 03 AP 1140 using H-REAP
Now, my company is considering to implement a wIPS solution, so i planned to install in the Main Site a MSE3300 and (01) AP 3500e as a wIPS AP Monitor in the remote sites,
Need to confirm:
A) Can an AP3500 work with HREAP and as wIPS monitor AP at the same time? or in other words, if it is possible to have an AP wIPS monitor far away from the WLC (over the WAN)?
B) What are the requirements of WAN link if I want to install a Centralized MSE 330 Engine,which perform the wIPS solution in all the network.
View 2 Replies
View Related
Apr 10, 2011
If I am to add the Self-generated certificate of my new CAS to my existing CAM's trusted certificate authorities list, will it just be added or will it replace the existing trusted certificate?
View 4 Replies
View Related
Feb 12, 2012
I've been asked to implement a point to multipoint solution which I had never done before.My question is how many non roots can the root support?I am planning to use 1310 bride as root with a AIR-ANT24120 and non roots AP1242 with AIR-ANT2410Y-R they wont be longer than 1 km.
View 2 Replies
View Related
Nov 19, 2012
I search at all cisco pages about support of VSS quad supervisor 2T support.Even relase notes, q&a etc. But until now I don’t found any pros or contra. Customer use the newest IOS 15.1.1-SY Customer uses already several system with quad sup720, has also experience.Customers actual state is:With quad sup 2T the 2nd sup2t of each VSS-chassis drops in rommon.Without VSS the same sup2t comes up either as active or standby!
View 2 Replies
View Related
